Einhell Cordless Angle Grinder TE-AG 18/125 CE Q Li Instruction Manual

1. Introduction

The Einhell TE-AG 18/125 CE Q Li cordless angle grinder is a versatile and powerful tool designed for a variety of tasks including grinding, cutting, roughing, and polishing. As part of the Einhell Power X-Change family, this tool offers cordless freedom and compatibility with all Power X-Change batteries and chargers. It features a robust PurePOWER brushless motor for extended runtime and power, constant electronics for stable performance, and a quick-fix nut for easy disc changes. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.

Figure 1: The Einhell Power X-Change ecosystem, highlighting battery compatibility across various tools.

2. Consignes de sécurité

Lors de l'utilisation d'une meuleuse d'angle, veuillez toujours respecter les consignes de sécurité suivantes afin d'éviter les blessures et les dommages.

• Portez un équipement de protection individuelle (EPI) : Always wear safety goggles, hearing protection, and work gloves. A dust mask is recommended for dusty operations.
• Sécuriser la pièce à travailler : Assurez-vous que la pièce à usiner est bien fermée.ampfixé ou sécurisé pour empêcher tout mouvement pendant le fonctionnement.
• Bonne prise en main : Maintain a firm grip on the tool with both hands, using the additional handle provided.
• Check Disc Condition: Before each use, inspect the grinding or cutting disc for cracks, chips, or damage. Replace damaged discs immediately.
• Correct Disc Type: Use only discs appropriate for the material and task. Ensure the disc's maximum RPM rating is higher than the tool's maximum speed.
• Adjust Disc Guard: Position the disc guard to provide maximum protection for the operator and to deflect sparks away from the body.
• Évitez les pots-de-vin : Be aware of potential kickback, especially when cutting. Maintain a stable stance and avoid binding the disc in the workpiece.
• Zone de travail dégagée : Keep the work area clean and well-lit. Remove any flammable materials.
• Sécurité des batteries : Use only Einhell Power X-Change batteries and chargers. Do not expose batteries to heat or water.
• Protection contre les surcharges : The tool is equipped with overload protection. If the tool stops, reduce pressure or allow it to cool down before resuming.
• Protection contre le redémarrage : The tool features restart protection to prevent accidental startup after a power interruption or battery change.

3. Composants terminésview

Familiarize yourself with the main components of your Einhell Cordless Angle Grinder:

• Brushless Motor (PurePOWER): Provides high power and efficiency with minimal maintenance.
• Bouton de verrouillage de la broche : For securing the spindle during disc changes.
• Quick-Fix Nut: Allows for tool-free and rapid changing of grinding/cutting discs.
• Quick-Adjust Disc Guard: Protects against sparks and debris, adjustable without tools.
• Poignée supplémentaire : Can be mounted in two positions for optimal control and comfort.
• Molette de réglage de la vitesse variable : Adjusts the rotational speed (3000-10500 RPM) for different materials.
• Affichage de la vitesse à LED : Indicates the selected speed setting.
• Dust Protection Grid: Integrated grid protects the tool's interior from dust and debris, removable for cleaning.
• Interface batterie : For connecting Power X-Change batteries.

4. Installation

4.1 Installation de la batterie

Ensure the battery is fully charged before use. The angle grinder is sold without a battery or charger, which must be purchased separately as part of the Power X-Change system.

1. Align the battery with the battery interface on the tool.
2. Faites glisser la batterie en place jusqu'à ce qu'elle s'enclenche correctement.
3. Pour la retirer, appuyez sur le bouton de déverrouillage de la batterie et faites-la glisser vers l'extérieur.

Figure 2: Illustration indicating that the battery and charger are not included with the tool and must be purchased separately.

4.2 Installation du disque et réglage de la protection

The angle grinder accepts cutting discs up to 125 mm in diameter.

1. Assurez-vous que l'outil est éteint et que la batterie est retirée.
2. Appuyez sur le bouton de verrouillage de la broche et maintenez-le enfoncé.
3. Unscrew the quick-fix nut by hand (or using a spanner if necessary, though it's designed for tool-free operation).
4. Place the desired grinding or cutting disc onto the flange, ensuring it is centered.
5. Screw the quick-fix nut back on and tighten it firmly by hand. Release the spindle lock button.
6. Adjust the quick-adjust disc guard to ensure maximum protection for your hands and body, deflecting sparks away from you.

Figure 3: Detail of the quick-fix nut mechanism for fast and tool-free disc changes.

4.3 Additional Handle Attachment

The additional handle can be screwed into either of the two mounting positions on the gear head for comfortable and secure two-hand operation.

5. Mode d'emploi

5.1 Mise sous/hors tension

1. To switch on, slide the ON/OFF switch forward.
2. To switch off, release the ON/OFF switch. The tool will stop.

5.2 Commande de vitesse variable

The integrated variable speed control allows you to adjust the rotational speed between 3000 and 10500 RPM, optimizing performance for different materials and applications. The constant electronics feature ensures that the selected speed is maintained even under load.

1. Use the speed control dial to select the desired RPM.
2. Refer to the LED speed display for the current setting.
3. Lower speeds are generally suitable for polishing or working with sensitive materials, while higher speeds are for aggressive grinding and cutting.

Figure 4: Close-up of the variable speed control dial, allowing precise speed adjustment.

Figure 5: The LED display showing speed settings and an overload indicator for safe operation.

5.3 Conseils généraux d'utilisation

• Laisser l'outil atteindre sa vitesse maximale avant d'entrer en contact avec la pièce à usiner.
• Apply moderate pressure; excessive force can lead to overheating, reduced performance, and disc damage.
• Move the tool smoothly and consistently across the workpiece.
• For cutting, use a cutting disc and make shallow passes to avoid binding.
• For grinding, hold the disc at a slight angle to the workpiece.

Figure 6: An operator using the Einhell angle grinder for a cutting application, demonstrating proper safety gear and technique.

6. Entretien

Un entretien régulier garantit la longévité et les performances optimales de votre meuleuse d'angle.

6.1 Nettoyage

• Retirez toujours la batterie avant le nettoyage.
• Nettoyez l'extérieur de l'outil avec un chiffon doux et sec.amp tissu. N'utilisez pas de produits chimiques agressifs ou de nettoyants abrasifs.
• The integrated dust protection grid can be easily removed for cleaning. Regularly clean it to prevent dust buildup and ensure proper air circulation.
• Use compressed air to clear ventilation slots and internal components of dust and debris.

Figure 7: Close-up of the removable dust protection grid, designed to shield internal components from debris.

6.2 Stockage

Store the angle grinder in a dry, secure place, out of reach of children. Remove the battery before storing for extended periods.

7. Dépannage

Voici quelques problèmes courants et leurs solutions potentielles :

8. Spécifications

9. Garantie et assistance

Einhell provides a 10-year guarantee on the PurePOWER brushless motor upon online registration. For detailed warranty information, product registration, or technical support, please visit the official Einhell webConsultez notre site web ou contactez votre concessionnaire local. Conservez votre reçu d'achat comme preuve d'achat.