Introduction
This manual provides detailed instructions for the proper setup, operation, and maintenance of your Geevon TX19 Wireless Remote Outdoor Sensor. Please read this manual thoroughly before use to ensure optimal performance and longevity of the device.
The Geevon TX19 sensor is designed to measure outdoor temperature and humidity, transmitting data wirelessly to a compatible Geevon weather station or indoor/outdoor thermometer. It is an essential component for monitoring environmental conditions in various outdoor settings.
Produit terminéview
Image : Avant view of the Geevon TX19 Wireless Remote Outdoor Sensor. The sensor is white with a red indicator light and ventilation slots at the top and bottom.
Caractéristiques principales :
- Mesure la température et l'humidité extérieures.
- Transmission sans fil via un signal de 433 MHz.
- Transmission range up to 200 feet (60 meters).
- Data transmitted every 30 seconds.
- Supports up to 3 channels for monitoring multiple locations with additional sensors.
- Compatible with specific Geevon weather stations and thermometers (models 208270, 208667, 208664, 215019, 8688, and 228646).
Composants inclus :
- 1 x Geevon TX19 Wireless Remote Outdoor Sensor
Installation
- Installation de la batterie :
Open the battery compartment on the back of the sensor. Insert two (2) AAA batteries, ensuring correct polarity (+/-). Close the battery compartment securely.
Remarques importantes sur la batterie : Do not use heavy-duty or rechargeable batteries. For low-temperature conditions, lithium batteries are recommended as alkaline batteries may perform improperly. Do not mix old and new batteries.
- Sélection des chaînes :
Locate the channel switch inside the battery compartment or on the sensor. Select the desired channel (1, 2, or 3). If using multiple sensors, assign a unique channel to each sensor.
- Association avec l'unité principale :
Once batteries are installed and a channel is selected, the sensor will automatically begin transmitting data. Ensure your compatible Geevon weather station or thermometer is powered on and within range to receive the signal. Refer to your main unit's manual for specific pairing instructions if needed.
- Emplacement du capteur :
For accurate readings, place the sensor in a ventilated outdoor environment. Avoid direct sunlight, as this can cause artificially high temperature readings. Keep the sensor away from heat sources (e.g., vents, appliances) and moisture sources (e.g., sprinklers, gutters).
Ensure the sensor is within 200 feet (60 meters) of the main unit. Maintain a distance of at least 3 feet (1 meter) from electronic devices that may cause wireless interference, such as TVs, microwaves, computers, or radios.
Compatibility Note: This sensor is compatible with Geevon Weather Station models 208270, 208667, 208664, 215019, 8688, and Indoor/Outdoor Thermometer model 228646. Please verify your main unit's compatibility before purchasing or using this sensor.
Mode d'emploi
The Geevon TX19 sensor operates automatically once properly set up. It continuously monitors outdoor temperature and humidity and transmits this data wirelessly to your compatible Geevon weather station or thermometer.
- Transmission de données : The sensor transmits updated data every 30 seconds.
- Surveillance multi-sites : If you are using multiple TX19 sensors (up to three), your main weather station will display temperature and humidity readings for each assigned channel, allowing you to monitor different outdoor locations simultaneously.
No user interaction is required for daily operation beyond initial setup and periodic battery replacement.
Entretien
- Remplacement de la batterie : The sensor requires two (2) AAA batteries. Replace batteries approximately every 6 months, or when the low battery indicator appears on your main weather station. Follow the battery installation guidelines in the Setup section.
- Nettoyage: Essuyez périodiquement l'extérieur du capteur avec un chiffon doux et sec.amp cloth. Do not use abrasive cleaners or immerse the sensor in water. Ensure no water or other liquids enter the sensor's internal components.
- Emplacement optimal : Regularly check the sensor's placement to ensure it remains in a ventilated area, away from direct sunlight, heat sources, and excessive moisture, to maintain accurate readings.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| No readings on main unit / Sensor not connecting |
|
|
| relevés de température/humidité inexacts |
|
|
| Durée de vie de la batterie courte |
|
|
Caractéristiques
| Numéro de modèle | TX19-W (Manufacturer Part Number: GN-TX19-CA) |
| Marque | Geevon |
| Source d'énergie | Fonctionne sur piles (2 piles AAA requises) |
| Autonomie de la batterie | Environ 6 mois |
| Technologie de connectivité | 433 MHz sans fil |
| Plage de transmission | Jusqu'à 200 pieds (60 mètres) |
| Temps de réponse | 30 secondes |
| Utilisation intérieure/extérieure | De plein air |
| Indice de température supérieur | 60 degrés Celsius |
| Dimensions du produit | 4 x 2 x 12 cm |
| Poids de l'article | 40 gramme |
| Matériel | Plastique |
| Caractéristiques spéciales | Pre-Calibrated, Wireless |
| Pays d'origine | Chine |
Informations sur la garantie
The Geevon TX19 Wireless Remote Outdoor Sensor comes with a Garantie de 1 ans À compter de la date d'achat, cette garantie couvre les défauts de fabrication et les dysfonctionnements dans des conditions normales d'utilisation. Veuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.
The warranty does not cover damage caused by misuse, accident, unauthorized modification, improper installation, or use with incompatible devices. For detailed warranty terms and conditions, please contact customer support.
Assistance clientèle
For any questions, technical assistance, or warranty inquiries regarding your Geevon TX19 Wireless Remote Outdoor Sensor, please contact our customer support team:
E-mail: support@geevon.com
Please provide your product model (TX19-W) and a detailed description of your issue when contacting support for faster service.