Manuel d'utilisation du pistolet à colle chaude sans fil WORKPRO 3.6 V

Introduction

Thank you for choosing the WORKPRO 3.6V Cordless Hot Glue Gun. This energy-saving, rechargeable glue gun kit is designed for various crafting and DIY projects, offering fast heating and a lightweight design for ease of use. It comes with 20 mini glue sticks and features an automatic safety power-off function. Please read this manual thoroughly before operation to ensure safe and efficient use of your new tool.

Consignes de sécurité

• Always keep the glue gun away from children.
• Do not touch the nozzle or melted glue as they can reach high temperatures and cause burns.
• Use only glue sticks of the specified diameter (0.27" Dia) to prevent damage or malfunction.
• Assurez-vous que la zone de travail est bien ventilée.
• Do not leave the hot glue gun unattended when it is powered on.
• Unplug or power off the glue gun when not in use or before performing any maintenance.
• Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
• Allow the equipment to cool down completely before packing it away.
• This glue gun is made of flame-retardant materials and includes an 8-minute automatic safety power-off function for enhanced safety.

Contenu du colis

Veuillez vérifier le contenu du colis pour vous assurer que tous les articles sont présents et non endommagés :

• 1 x WORKPRO 3.6V Cordless Hot Glue Gun
• 20 x Mini Glue Sticks (0.27" Dia)
• 1 x câble de chargement de type C
• 1 x Manuel d'utilisation (ce document)

Produit terminéview

Familiarize yourself with the components of your WORKPRO Cordless Hot Glue Gun:

• Ajutage: Dispenses melted glue.
• Interrupteur marche / arrêt: Permet d'allumer et d'éteindre l'appareil.
• Glue Stick Entry: Where glue sticks are inserted.
• Indicateur LED : Displays heating status (red for heating, green for ready) and charging status (red for charging, green for charged).
• Trigger Lever: Active la distribution de colle.
• Port de charge de type C : Pour connecter le câble de chargement.
• Retractable Stand-up Base: Provides stability when the gun is not in use.

Installation

Charging the Glue Gun

The WORKPRO hot glue gun is equipped with a 2500mAh rechargeable lithium battery. Before first use, or when the battery is low, charge the device:

1. Locate the Type-C charging port on the glue gun.
2. Connect the provided Type-C charging cable to the glue gun and to a 5V 1A power source (e.g., power bank, computer USB socket, car USB socket, or a USB wall adapter).
3. L'indicateur LED s'allume en rouge pendant la charge et devient vert lorsqu'il est complètement chargé.

Mode d'emploi

Follow these steps to operate your hot glue gun:

1. Insérer le bâton de colle : Insert a mini glue stick (0.27" diameter) into the back opening of the glue gun until it stops.
2. Mise sous tension : Press and hold the ON/OFF switch for 3 seconds. The LED indicator will light up red, indicating that the gun is heating.
3. Préchauffer: Allow the glue gun to preheat for approximately 90 seconds. The LED indicator will change from red to green when it is ready for use.
4. Appliquer de la colle : Once the LED is green, gently pull the trigger lever to dispense melted glue onto your desired surface.
5. Arrêt automatique: The glue gun is equipped with an 8-minute automatic safety power-off function. If left idle for 8 minutes, it will automatically power off to conserve battery and enhance safety.

Remarques importantes :

• Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
• Éteignez l'équipement et laissez-le refroidir complètement avant de le ranger.
• The glue gun features a less-drip nozzle design to reduce glue spillage and keep your work area clean.

Entretien

• Nettoyage: Ensure the glue gun is completely cool before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
• Entretien des buses : Do not attempt to clean the nozzle while the gun is hot. Any hardened glue around the nozzle can be carefully removed once the gun is cold.
• Stockage: Store the glue gun in a cool, dry place, away from direct sunlight and out of reach of children. Ensure no glue stick is left partially melted in the chamber if storing for an extended period.
• Entretien de la batterie: Pour une durée de vie optimale de la batterie, évitez de la décharger complètement et fréquemment. Rechargez-la régulièrement, même si vous ne l'utilisez pas en permanence.

Dépannage

Caractéristiques

Garantie et assistance

For warranty information and customer support, please refer to the product packaging or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the official WORKPRO store on Amazon: Magasin WORKPRO