DANOPLUS DP-355 Quantum PAR Meter Instruction Manual

1. Introduction

The DANOPLUS DP-355 Quantum PAR Meter is designed for measuring Photosynthetically Active Radiation (PAR) within the photosynthetic waveband. This meter provides accurate and reliable readings of light energy available for photosynthesis, crucial for monitoring plant growth in various environments.

The measurement range of the DP-355 is between 0 and 5000 µmol/m²/sec. It specifically measures light in the 400 nm to 700 nm wavelength range, with a tolerance of ±10 nm at both the cut-on and cut-off wavelengths. This ensures that the meter captures the light spectrum most relevant to plant photosynthesis.

2. Principales caractéristiques

• Reliable Measurement: Measures PAR from 0 to 5000 µmol/m²/sec within the 400-700 nm photosynthetic waveband, ensuring high precision for plant light requirements.
• Fonction d'enregistrement : Stores up to 100 measured values, allowing for tracking and review of PAR changes over time. Features a real-time display of the last four recorded data points for quick reference.
• Utilisation polyvalente : An essential tool for growers, scientists, and researchers to optimize plant growth, improve energy efficiency, and enhance crop management.
• Prise de trépied : Includes a tripod socket for secure and stable attachment to a tripod (not included), providing flexibility and accuracy during measurements.
• Conception portable : Compact, lightweight, and ergonomic, making it easy to carry and use in various locations such as greenhouses, growth chambers, or fields.

Figure 2.1 : Plusview of DANOPLUS DP-355 Quantum PAR Meter features including Max/Min/Avg, High Accuracy, Auto-power off, Fast Response, Large measurement range, Compact size, 100 Data log, and Data Hold.

Figure 2.2: The DP-355 PAR Meter is suitable for wide applications such as crop growth monitoring, greenhouse control, plant factories, and seed cultivation.

3. Composants du produit et plusview

Familiarize yourself with the various parts of your DANOPLUS DP-355 Quantum PAR Meter.

Figure 3.1 : Face et dos view of the DP-355 PAR Meter, highlighting the Sensor diffuser, Power Key, LCD display, Hold key, Down key, Mode key, Up key, Battery compartment, Battery cover, and Tripod socket.

Figure 3.2 : Détaillé view of the large screen display, indicating the Menu or MAX/MIN/AVE data, Battery indicator, Hold display, Measuring unit, Measured value, and the last 4 records.

4. Installation

4.1 Installation de la batterie

1. Repérez le compartiment à piles à l'arrière du compteur (voir figure 3.1).
2. Faites glisser le couvercle de la batterie pour l'ouvrir.
3. Insert the required Alkaline batteries, ensuring correct polarity (+/-). The meter requires batteries to operate.
4. Fermez soigneusement le couvercle de la batterie.

4.2 Mise sous/hors tension

• Pour allumer l'appareil, appuyez sur le bouton POUVOIR clé.
• Pour éteindre l'appareil, maintenez enfoncée la touche POUVOIR key until the display turns off. The meter also features an auto-power off function to conserve battery life.

4.3 Fixation sur trépied (en option)

For stable and consistent measurements, especially over time or in specific locations, the meter can be mounted on a tripod.

1. Locate the tripod socket on the back of the meter (refer to Figure 3.1).
2. Screw the meter onto a standard tripod (tripod not included).
3. Adjust the tripod to the desired height and angle for measurement.

Figure 4.1: The DP-355 PAR Meter shown with a tripod mount for stable measurements. Note: Tripod is not included.

5. Mode d'emploi

5.1 Prendre une mesure

1. Vérifiez que le compteur est sous tension.
2. Position the sensor diffuser directly under the light source at the desired measurement point.
3. The current PAR value will be displayed on the LCD screen in µmol/m²/sec.

Figure 5.1: Using the DP-355 PAR Meter to measure light intensity in a plant cultivation setup.

5.2 Using the Record Function

The meter can store up to 100 measurements and display the last four readings.

• Pour enregistrer une mesure, appuyez sur A/LOG button. The current reading will be stored.
• À view stored data, navigate through the menu using the MODE boutons et touches fléchées.
• The display will show the last four recorded data points in real-time, allowing for quick monitoring of recent changes.

5.3 Fonction de maintien des données

Pour figer la lecture actuelle affichée :

• Appuyez sur le PRISE button. The displayed value will be held.
• Appuyez sur le PRISE button again to release and resume live measurements.

5.4 Advanced Measurement with External Devices

The DP-355 can be used in conjunction with external applications for more detailed analysis, such as calculating Daily Light Integral (DLI) or mapping PAR distribution.

6. Entretien

6.1 Nettoyage

• Keep the sensor diffuser clean and free from dust or debris. Use a soft, dry cloth to gently wipe the sensor.
• Clean the meter's body with a slightly damp chiffon. N'utilisez pas de nettoyants abrasifs ou de solvants.

6.2 Stockage

• En cas de non-utilisation prolongée, retirez les piles pour éviter les fuites.
• Store the meter in its carrying pouch in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Dépannage

• Le compteur ne s'allume pas : Vérifiez l'installation des piles et assurez-vous qu'elles ne sont pas déchargées. Remplacez-les si nécessaire.
• Lectures inexactes : Ensure the sensor diffuser is clean and unobstructed. Verify the meter is positioned correctly relative to the light source.
• Problèmes d'affichage : Si l'écran est faiblement lumineux ou clignote, remplacez les piles.
• Les données ne sont pas enregistrées : Ensure the A/LOG button is pressed firmly. Check if the memory is full (though it stores up to 100 values).

8. Spécifications

9. Garantie et assistance

For warranty information and technical support, please refer to the documentation included with your product or contact DANOPLUS customer service through their official website or the retailer from whom the product was purchased. Keep your purchase receipt as proof of purchase for warranty claims.