Sigma Tile Cutter Art. 4FN 155 cm Instruction Manual

Introduction

Thank you for choosing the Sigma Art. 4FN Tile Cutter. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tile cutter. Please read these instructions carefully before use and keep them for future reference.

The Sigma Art. 4FN is a hand-powered tile cutter designed for precise and clean cuts on various tile types. It features an aluminum structure, a push-scoring mechanism, adjustable cutting thickness from 0-19 mm, a rotating breaking foot, and an adjustable measuring bar up to 155x155 cm.

Consignes de sécurité

Always prioritize safety when operating any tool. Failure to follow these safety guidelines may result in injury or damage to the tool.

• Lire le manuel : Always read and understand this entire instruction manual before operating the tile cutter.
• Portez un équipement de protection : Portez toujours un équipement de protection individuelle (EPI) approprié, notamment des lunettes de sécurité, des gants et des chaussures robustes.
• Surface de travail stable : Ensure the tile cutter is placed on a stable, level, and non-slip work surface.
• Gardez la zone dégagée : Maintain a clean and well-lit work area. Remove any clutter that could interfere with operation.
• Inspecter avant utilisation : Before each use, inspect the tile cutter for any signs of damage or wear. Do not use if any components are damaged.
• Proper Tile Placement: Ensure the tile is correctly positioned and secured before scoring and breaking.
• À manipuler avec précaution : The scoring wheel is sharp. Handle the scoring unit with care to avoid cuts.
• Enfants et témoins : Tenez les enfants et les passants éloignés de la zone de travail.
• Stockage: Rangez le coupe-carreaux dans un endroit sec et sûr, hors de portée des enfants.

Composants terminésview

Familiarize yourself with the main components of your Sigma Art. 4FN Tile Cutter:

• Structure en aluminium : The robust frame providing stability and support.
• NEX Handle: Ergonomically shaped handle, specifically designed for push-scoring.
• Scoring Unit: Contains the 16 mm diameter scoring wheel. It is clearly visible to the operator and features double springing for cushioned scoring of structured tiles. The scoring wheel rotates on a roller bearing, guided laterally by an anti-friction metal shell inserted into a CNC-milled housing, to prevent friction and lateral wear.
• Fracture du pied : A rotating mechanism used to apply pressure and break the tile along the scored line.
• Adjustable Measuring Bar: An orientable bar for precise measurement and positioning of tiles, up to 155x155 cm.
• Cutting Thickness Adjustment: Mechanism to adjust the cutting depth for tiles between 0-19 mm.

Image: The Sigma Art. 4FN Tile Cutter, showcasing its robust aluminum frame, scoring unit, and measuring bar. This image provides a general view of the product's design and key features.

Installation

The Sigma Art. 4FN Tile Cutter typically requires minimal assembly. Follow these steps to prepare your tool for use:

1. Déballage: Retirez soigneusement tous les composants de l'emballage. Vérifiez qu'ils n'ont pas été endommagés pendant le transport.
2. Placement: Place the tile cutter on a sturdy, flat, and stable workbench or surface. Ensure it does not wobble.
3. Inspecter les composants : Verify that all included components, especially the scoring wheel and measuring bar, are present and undamaged. The scoring wheel (16 mm diameter) is included.
4. Adjust Measuring Bar: If not already attached, secure the adjustable measuring bar. Ensure it can rotate freely and lock into desired positions for accurate measurements.
5. Check Scoring Unit: Ensure the scoring unit moves smoothly along its track and the scoring wheel rotates freely.

Mode d'emploi

Suivez ces étapes pour une coupe de carrelage efficace et sûre :

1. Preparing the Tile

1. Mesurer et marquer : Accurately measure the tile and mark the desired cut line with a pencil or marker.
2. Positionnez la tuile : Place the tile on the cutter's bed, aligning the marked cut line with the scoring line indicator on the machine. Use the adjustable measuring bar to ensure precise alignment.
3. Adjust Cutting Thickness: Use the cutting thickness adjustment mechanism to set the appropriate depth for your tile (0-19 mm). This ensures optimal scoring pressure.

2. Scoring the Tile

1. Position Scoring Unit: Bring the scoring unit to the edge of the tile furthest from you.
2. Appliquer une pression : Firmly grasp the NEX handle. Apply consistent, moderate downward pressure.
3. Marquer le carreau : Push the scoring unit smoothly and steadily across the tile in a single, continuous motion towards you. A distinct scoring sound should be heard. Avoid multiple passes, as this can lead to a rougher edge.

3. Breaking the Tile

1. Position du pied de rupture : Once the tile is scored, position the rotating breaking foot directly over the scored line, typically near the edge of the tile closest to you.
2. Apply Breaking Pressure: Apply quick, firm, and even downward pressure on the NEX handle. The tile should snap cleanly along the scored line.
3. Retirer les morceaux coupés : Carefully remove the two tile pieces. Be mindful of sharp edges.

Entretien

Regular maintenance ensures the longevity and optimal performance of your tile cutter.

• Nettoyage: After each use, clean the tile cutter to remove tile dust and debris. Use a brush or compressed air. Wipe down surfaces with a damp chiffon, puis séchez soigneusement.
• Lubrification: Periodically apply a light lubricant to the scoring unit's guide rails to ensure smooth movement.
• Inspection de la roue de notation : Regularly inspect the 16 mm scoring wheel for wear or damage. A dull or chipped wheel will result in poor cuts. Replace the wheel as needed. Replacement wheels are available, including TIN-coated versions for enhanced durability.
• Stockage: Rangez le coupe-carreaux dans un endroit propre et sec pour éviter la rouille et la corrosion.

Dépannage

Voici quelques problèmes courants et leurs solutions potentielles :

Caractéristiques

Technical details for the Sigma Art. 4FN Tile Cutter:

• Fabricant: Sigma
• Code de l'article: 4FN
• Numéro de modèle : 4FN
• Dimensions du produit : 195.58 x 48.26 x 30.48 cm
• Poids de l'article : 26 kilogrammes
• Type d'alimentation : Alimenté à la main
• Nombre d'articles : 1
• Composants inclus : Scoring Wheel (16 mm diameter)
• Piles requises : Non
• Cutting Thickness Adjustment: 0-19 mm
• Adjustable Measuring Bar: Up to 155x155 cm

Garantie et assistance

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support or replacement parts, please contact Sigma customer service through their official website ou votre revendeur agréé.