AmScope M162C-2L-PB10 Student Microscope Instruction Manual

Introduction

This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your AmScope M162C-2L-PB10 Student Microscope. This optical glass monocular microscope features both top and bottom LED lights, offering versatile illumination for various specimens. It provides five wide-field magnification settings: 40X, 100X, 250X, 400X, and 1000X, making it suitable for a range of educational and observational needs. The sturdy metal frame ensures durability, while coaxial coarse and fine focusing mechanisms allow for precise adjustments.

Figure 1: AmScope M162C-2L-PB10 Student Microscope, showcasing sa conception robuste et ses composants clés.

Qu'y a-t-il dans la boîte

Lors du déballage, assurez-vous que tous les éléments suivants sont présents :

• AmScope M162C-2L-PB10 Monocular Microscope
• Eyepieces (typically 10X and 25X for varied magnification)
• Objective Lenses (4X, 10X, 40X)
• Adaptateur secteur
• 3 AA Batteries (for portable use)
• 5 Prepared Glass Slides
• 5 Blank Glass Slides
• 1 Plastic Slide Case
• Cache-poussière
• Accessory Kit (may include tweezers, dropper, etc.)
• Manuel d'utilisation

Figure 2: Included prepared and blank slides, along with a protective plastic case.

Installation

1. Déballage: Retirez soigneusement tous les composants de l'emballage. Conservez l'emballage pour un stockage ou un transport ultérieur.
2. Placement: Place the microscope on a stable, flat surface away from direct sunlight, high temperatures, dust, and vibrations.
3. Connexion électrique :
   • Alimentation secteur : Connect the AC power adapter to the microscope's power input jack and then plug it into a standard electrical outlet.
   • Puissance de la batterie : Open the battery compartment (usually located at the base) and insert 3 AA batteries, ensuring correct polarity. This allows for portable use.
4. Installation de l'oculaire : Insert the desired eyepiece (e.g., 10X or 25X) into the top of the monocular head.
5. Cache-poussière : When not in use, cover the microscope with the provided dust cover to protect it from dust and debris.

Mode d'emploi

1. Mise sous tension : Flip the power switch (usually located at the base) to turn on the illumination.
2. Sélection d'éclairage :
   • Lumière inférieure : Use for transparent specimens (e.g., prepared slides). Adjust the intensity using the dimmer control.
   • Lumière supérieure : Use for opaque specimens (e.g., leaves, insects). Adjust the intensity using the dimmer control.
3. Dépôt d'un spécimen : Déposez une lame préparée ou votre propre échantillon sur la lame.tage. Secure it with the staget des clips.
4. Sélection du grossissement : Rotate the revolving nosepiece to select the lowest power objective lens (e.g., 4X). This provides the widest field of view and makes initial focusing easier.
5. Mise au point :
   • Regardez à travers l'oculaire.
   • Utilisez le molette de mise au point grossière (larger knob) to bring the specimen into approximate focus. Turn it slowly to raise or lower the stage.
   • Once roughly focused, use the molette de mise au point fine (smaller knob) for precise, sharp focusing.
6. Adjusting Diaphragm: The single lens condenser with a 6-hole disc diaphragm controls the amount of light passing through the specimen. Rotate the disc to adjust the aperture size, optimizing contrast and resolution for your specimen.
7. Augmenterasing Magnification: Once focused at low power, rotate the revolving nosepiece to a higher power objective lens (e.g., 10X, 40X). Re-adjust focus using only the fine focus knob. For 1000X magnification, use the 100X objective with the 10X eyepiece, or 40X objective with 25X eyepiece.

Figure 3: Demonstrating the use of focus knobs for clear specimen viewing.

Vidéo officielle du produit

Vidéo 1 : Un overview of the AmScope M162C-2L-PB10 microscope, highlighting its features and ease of use.

Entretien

• Nettoyage des lentilles : Use only specialized lens cleaning paper and lens cleaning solution. Gently wipe the lens surfaces. Avoid touching lenses with bare fingers.
• Nettoyage du corps : Essuyez le corps du microscope avec un chiffon doux et sec.amp tissu. N'utilisez pas de produits chimiques agressifs ou de nettoyants abrasifs.
• Stockage: Always cover the microscope with the dust cover when not in use. Store in a dry, cool place.
• Remplacement de la batterie : If using battery power, replace all 3 AA batteries when the illumination dims significantly. Ensure correct polarity.

Dépannage

Caractéristiques

• Modèle: M162C-2L-PB10
• Grossissement: 40X, 100X, 250X, 400X, 1000X
• Oculaires : 10X, 25X
• Objectifs : 4X, 10X, 40X (achromatique)
• Tête: Monoculaire, incliné à 45 degrés, rotatif à 360 degrés
• Éclairage: Dual LED (Top and Bottom)
• Mise au point : Mise au point coaxiale grossière et fine
• Stage: Plaine Stage avec Staget Clips
• Condenseur: Single Lens with 6-hole Disc Diaphragm
• Source d'alimentation : AC Adapter (240 Volts) or 3 AA Batteries
• Matériel: Metal Frame, Polycarbonate components
• Poids de l'article : 6 livres

Garantie

The AmScope M162C-2L-PB10 Student Microscope is covered by a Garantie d'un anCette garantie couvre les défauts de fabrication et assure la qualité et la durabilité de votre produit. Veuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.

Soutien

For technical assistance, replacement parts, or further inquiries regarding your AmScope M162C-2L-PB10 microscope, please visit the official AmScope website or contact their customer support. Detailed contact information can typically be found on the product packaging or the AmScope brand store on Amazon.

AmScope Store Link: Visit the AmScope Store