1. Introduction
This manual provides essential information for the safe and efficient operation of your Barska AX13744 2.02 Cu Ft Fireproof Biometric Safe. Please read these instructions carefully before installation and use. The safe is designed to provide high security for your valuables with thick steel construction, fire protection, and multiple access options.
Figure 1 : Face avant view of the Barska AX13744 Biometric Safe.
2. Consignes de sécurité
- Conservez toujours vos clés de secours dans un endroit sûr, à l'écart du coffre-fort. Ne les rangez pas à l'intérieur du coffre-fort.
- Assurez-vous que le coffre-fort est solidement fixé afin d'empêcher tout retrait non autorisé.
- Do not expose the safe to extreme temperatures or humidity beyond its specified operating conditions.
- Regularly check battery levels to ensure proper function of the electronic lock.
- Gardez la porte du coffre-fort fermée et verrouillée lorsqu'elle n'est pas utilisée.
3. Contenu du colis
Vérifiez que tous les éléments énumérés ci-dessous sont inclus dans votre colis :
- Barska AX13744 Safe Unit
- 2 Adjustable Shelves with Shelf Brackets
- 4 piles AA
- Mounting Hardware (bolts, anchors)
- Set of Emergency Back-Up Keys (2 keys)
Figure 2 : Composants inclus et dimensions du produit.
4. Installation
4.1. Installation de la batterie
- Repérez le compartiment à piles à l'intérieur de la porte du coffre-fort.
- Insert the 4 AA batteries (included) according to the polarity indicators (+/-).
- Fermez soigneusement le couvercle du compartiment à piles.
4.2. Initial Access and Opening
Upon first use, open the safe using the emergency keys:
- Repérez le cache de la serrure sur le clavier électronique.
- Retirez le cache pour accéder à la serrure.
- Insert one of the emergency keys and turn it clockwise while simultaneously turning the handle to open the safe door.
- Once open, you can proceed with programming fingerprints and PIN codes.
4.3. Installation du coffre-fort
The safe is designed for floor mounting to enhance security. Use the provided mounting hardware.
- Choose a suitable location for the safe, ensuring a stable surface.
- Mark the pre-drilled mounting points on the floor through the safe's base.
- Drill pilot holes into the floor at the marked locations.
- Position the safe over the holes and secure it using the provided bolts and anchors.
- Assurez-vous que le coffre-fort est solidement fixé et ne vacille pas.
Figure 3 : Intérieur view of the safe with adjustable shelves.
5. Mode d'emploi
5.1. Biometric Fingerprint Access
The safe can store up to 160 distinct fingerprints.
- To program a fingerprint, press the programming button located inside the safe.
- Place your finger on the biometric scanner. The indicator light will confirm successful scanning.
- Repeat the scan multiple times for better accuracy.
- To open the safe, place a registered finger on the scanner. Once recognized, turn the handle to open.
5.2. Keypad PIN Code Access
The safe supports up to 2 unique PIN codes.
- To program a PIN code, press the programming button inside the safe.
- Enter your desired PIN code (4-8 digits) on the keypad, followed by the '#' key.
- Repeat the process to confirm the PIN code.
- To open the safe, enter your programmed PIN code followed by '#'. Once confirmed, turn the handle to open.
5.3. Accès par clé d'urgence
In case of battery failure or forgotten codes, use the emergency keys as described in Section 4.2.
Figure 4: Emergency access using a 9V battery (not included).
5.4. Système d'alarme
- Motion Sensor Alarm: The safe features a programmable motion sensor alarm that will activate if the safe is disturbed.
- Mode de verrouillage : The safe will enter a lockout mode after 3 incorrect PIN codes or 5 unsuccessful fingerprint scans.
- Programmable Silent Access Mode: This mode allows for discreet entry without audible feedback. Refer to the full manual for programming details.
5.5. Lumière LED interne
The safe is equipped with an internal LED light that illuminates the interior when the door is opened, improving visibility of contents.
5.6. Étagères réglables
The two included shelves can be adjusted to different heights to accommodate various item sizes. Simply remove the shelf brackets, reposition them to the desired height, and reinsert the shelves.
Vidéo 1 : Un court pré-view demonstrating the advanced security features of the Barska safe, including biometric and keypad access.
6. Entretien
- Nettoyage: Essuyez l'extérieur du coffre-fort avec un chiffon doux et sec.amp Chiffon. Évitez les nettoyants abrasifs ou les solvants.
- Remplacement de la batterie : Replace the AA batteries annually or when the low battery warning indicator appears. Use high-quality alkaline batteries.
- Mécanisme de verrouillage : Do not lubricate the lock mechanism. If the lock becomes stiff, contact customer support.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Safe does not open with fingerprint/PIN. | Low batteries, incorrect fingerprint/PIN, lockout mode activated. | Replace batteries. Re-enter correct fingerprint/PIN. Use emergency key. Wait for lockout mode to reset. |
| Le clavier ne répond pas. | Piles mortes. | Use emergency 9V battery for temporary power (see Figure 4) or emergency keys. Replace internal AA batteries. |
| L'alarme retentit inopinément. | Motion sensor triggered, tamptentative de montage. | Ensure safe is stable. Check for signs of tampering. Deactivate motion sensor if not needed. |
| La porte ne se ferme pas correctement. | Obstruction, boulons mal alignés. | Check for items blocking the door or bolts. Ensure safe is on a level surface. |
8. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Marque | Barska |
| Numéro de modèle | AX13744 |
| Capacité | 2.02 pieds cubes |
| Dimensions du produit (extérieures) | 13.78"P x 26"L x 16.93"H |
| Type de serrure | Serrure à combinaison biométrique et électronique, clé |
| Matériel | Acier allié |
| Résistance au feu | 30 minutes à 1400°F |
| Type de montage | Montage au sol |
| Caractéristiques spéciales | Alarm System, Anti-Theft, Combination Lock, Fire Resistant, Sensor Light |
| Source d'énergie | 4 piles AA (incluses) |
| Poids de l'article | 112.3 livres |
Figure 5: Fire resistance features of the safe.
9. Garantie et assistance
Pour obtenir des informations sur la garantie, veuillez consulter le site officiel du fabricant. website or contact Barska customer support directly. Replacement parts or accessories can also be requested through their website.
Questions fréquemment posées :
- Are replacement parts or accessories available for this product if needed? S'il vous plaît visitez notre website to request keys or replacement parts.