Shuttle XPC Slim DH610 Barebone PC Instruction Manual

1. Introduction

This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Shuttle XPC Slim DH610 Barebone PC. The DH610 is a compact and versatile barebone system designed to support Intel 12th and 13th Generation LGA1700 processors, offering robust performance for various applications including office, digital signage, and kiosks.

2. Consignes de sécurité

Veuillez lire et suivre ces consignes de sécurité afin d'éviter d'endommager l'appareil ou de vous blesser :

• Always disconnect the power cord before performing any installation or maintenance.
• Ensure the system is placed on a stable, flat surface with adequate ventilation.
• N’exposez pas l’appareil à l’humidité, aux températures extrêmes ou à la lumière directe du soleil.
• Only use the power adapter provided or an approved equivalent.
• Pour toute réparation non traitée dans ce manuel, veuillez vous adresser à un technicien qualifié.

3. Contenu du colis

Vérifiez que tous les éléments sont présents dans votre colis :

• Shuttle XPC Slim DH610 Barebone PC Unit
• Kit de montage VESA
• Adaptateur secteur et cordon
• Accessory Pack (screws, cables, etc.)
• Guide de démarrage rapide (le cas échéant)

4. Configuration et installation

The Shuttle DH610 is a barebone system, requiring the installation of a CPU, RAM, and storage devices before operation.

4.1. Opening the Chassis

Carefully remove the chassis cover to access the internal components. Typically, this involves unscrewing a few screws on the rear or sides of the unit and sliding the cover off.

Image: The Shuttle XPC Slim DH610 with its top cover removed, showing the internal layout including cooling fans and the motherboard.

4.2. Installation du processeur

The DH610 supports Intel 12th/13th Generation Alder Lake-S LGA1700 processors with a maximum TDP of 65W. Ensure your chosen CPU has integrated graphics, as the system does not support F-series processors without integrated graphics or K-series processors.

1. Ouvrez le levier du socket du processeur et retirez le cache de protection.
2. Carefully align the CPU with the socket, matching the triangular markers.
3. Insérez délicatement le processeur dans le socket sans forcer.
4. Fermez le levier du socket pour fixer le processeur.
5. Installez le refroidisseur de processeur conformément aux instructions du fabricant.

Image : Une image détaillée view of the Shuttle DH610 motherboard, highlighting the LGA1700 CPU socket, RAM slots, and other integrated circuits.

Note: For 13th Gen Intel Processors, BIOS Version DH610000.202 or newer is required. Update BIOS if necessary after initial setup with a 12th Gen CPU or via a compatible method.

4.3. Installation de la RAM

The system features two 260-pin dual-channel DDR4 SODIMM slots, supporting up to 64GB (2x 32GB) at 3200MHz. Dual-channel memory is recommended for optimal performance.

1. Locate the SODIMM slots on the motherboard.
2. Alignez l'encoche du module de RAM avec le détrompeur dans son logement.
3. Insert the module at a 45-degree angle and push down until the clips on both sides snap into place.

4.4. Installation de stockage

The DH610 supports one 2.5-inch HDD/SSD and one M.2 2280 SSD.

1. 2.5" Drive: Mount the 2.5" HDD/SSD into the designated bay using the provided screws and connect the SATA data and power cables.
2. SSD M.2 : Insert the M.2 2280 SSD into its slot, securing it with the provided screw.

4.5. Connexion de périphériques

After installing internal components, reattach the chassis cover. Connect your peripherals to the available ports:

• Afficher: Connect your monitor(s) to the HDMI 2.0b port or one of the two DisplayPort outputs. The system supports up to three 4K UHD displays.
• Périphériques USB : Use the four USB 3.2 Gen1 ports (including one Type-C) and four USB 2.0 ports for keyboard, mouse, and other USB devices.
• Réseau: Connect to your network using either of the two Gigabit Ethernet LAN ports (Intel 2.5GbE + Intel 1GbE).
• Périphériques série : Utilize the two RS232 COM ports for compatible devices.
• Audio: Connect headphones or a microphone to the front audio jacks.

Image: The front panel of the Shuttle DH610, featuring the power button, USB 3.2 Gen1 ports (one Type-C), and audio input/output jacks.

Image: The rear panel of the Shuttle DH610, displaying the DC-IN power input, HDMI, two DisplayPort outputs, two LAN ports, USB ports, and two COM ports.

4.6. Connexion électrique

Connect the power adapter to the DC-IN port on the rear of the unit, then plug the power cord into an electrical outlet.

5. Mode d'emploi

5.1. Mise sous/hors tension

• Mise sous tension : Appuyez sur le bouton d'alimentation situé sur le panneau avant.
• Éteindre: Perform a graceful shutdown through your operating system. Alternatively, press and hold the power button for 4-5 seconds for a forced shutdown (use only when necessary).

5.2. Installation du système d'exploitation

The DH610 is compatible with Windows 11/10 (64-bit) and Linux (64-bit) operating systems. Follow the standard installation procedures for your chosen OS. Ensure all necessary drivers are installed for optimal performance, which can typically be found on the Shuttle support website.

5.3. Accès au BIOS/UEFI

Pour accéder à l'utilitaire de configuration du BIOS/UEFI, appuyez sur Supprimer or F2 key repeatedly during system startup. This allows configuration of boot options, system settings, and hardware parameters.

6. Entretien

6.1. Nettoyage

Regularly clean the exterior of the unit with a soft, dry cloth. Use compressed air to clear dust from ventilation openings to ensure proper airflow and prevent overheating. Do not use liquid cleaners directly on the device.

6.2. Mises à jour du BIOS

Periodically check the Shuttle website for BIOS updates. BIOS updates can improve system stability, add support for new hardware (like 13th Gen Intel CPUs), and fix bugs. Follow the instructions provided with the BIOS update package carefully.

7. Dépannage

If you encounter issues with your DH610, refer to the following common problems and solutions:

• Aucune sortie d'affichage :
  • Ensure the monitor is powered on and correctly connected to the HDMI or DisplayPort.
  • Verify that the CPU has integrated graphics and that the display cable is connected to the motherboard's video output, not a discrete graphics card (if applicable).
  • Essayez un autre câble d'affichage ou un autre moniteur.
• Le système ne s'allume pas :
  • Check that the power adapter is securely connected to both the unit and the electrical outlet.
  • Ensure the CPU and RAM are correctly installed and seated.
  • Testez la prise de courant avec un autre appareil.
• 13th Gen CPU Not Recognized:
  • The system requires BIOS Version DH610000.202 or newer for 13th Gen Intel processors. If you have an older BIOS, you may need to install a 12th Gen CPU first to update the BIOS.
• Surchauffe du système :
  • Ensure the chassis ventilation holes are not obstructed.
  • Clean any dust accumulation from the internal fans and heatsinks.
  • Vérifiez que le refroidisseur du processeur est correctement installé et qu'il est en bon contact avec le processeur.

8. Spécifications

9. Garantie et assistance

9.1. Garantie du fabricant

The Shuttle XPC Slim DH610 Barebone PC comes with a 3-Year Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

9.2. Assistance technique

For technical assistance, driver downloads, BIOS updates, or further troubleshooting not covered in this manual, please visit the official Shuttle website or contact Shuttle customer support. Free lifetime technical support is typically provided by the manufacturer.

Pour plus d'informations, visitez : www.navette.com