Consignes de sécurité
Please read and understand all safety warnings before operating the NERF Pro Gelfire X MrBeast Blaster. Failure to follow these instructions may result in injury.
- Ages 14 and up: This product is intended for users aged 14 and older. It is not a toy.
- Protection des yeux : Always wear the provided protective eyewear for players and people within range. Do not aim at eyes or face.
- Official GelFire Rounds: Use only official NERF GelFire Rounds. Using unofficial rounds may cause damage to the blaster or injury.
- Hydratation : Use only clean tap water to hydrate rounds. Do not freeze or modify rounds.
- Blaster Modification: Do not modify the blaster in any way. Unauthorized modifications can affect performance and safety.
- Impact: L'impact des balles peut provoquer des marques temporaires sur la peau.
- Sécurité des batteries : Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45°C, or Incinerate the battery. Follow Manufacturer's Instructions.
- Gel Rounds: Do not eat gel rounds. Keep away from pets. Rounds may stain certain surfaces.
- Chargement : Requires a USB-A wall charger (not included) for the rechargeable battery.
Ce qui est inclus
Your NERF Pro Gelfire X MrBeast Blaster package includes the following components:
- NERF Pro Gelfire X MrBeast Blaster
- 300-round capacity hopper
- 20,000 dehydrated Nerf Pro Gelfire soft super absorbent polymer projectiles (gel rounds)
- Removable barrel attachment
- Extendable stock
- Lunettes de protection
- Easy slide-in slide-out rechargeable battery
- Universal USB-A to USB-C charging cable
Installation
1. Hydrating Gel Rounds
The Nerf Pro Gelfire rounds come dehydrated. To prepare them for use:
- Pour the dehydrated gel rounds into a large container.
- Add clean tap water, ensuring the rounds are fully submerged.
- Allow the rounds to soak for approximately 3-4 hours until they expand to their full size (about 7.5mm).
- Drain any excess water before loading them into the hopper.
2. Installation de la batterie
The blaster uses a removable rechargeable Lithium Polymer battery.
- Repérez le compartiment à piles sur le pistolet.
- Insérez la batterie complètement chargée dans le compartiment, en vous assurant qu'elle s'enclenche correctement.
- Fermez le couvercle du compartiment à piles.
3. Attaching the Hopper
The blaster features a 300-round capacity hopper.
- Ouvrez le couvercle de la trémie.
- Carefully pour the hydrated gel rounds into the hopper.
- Fermez bien le couvercle de la trémie.
- Attach the loaded hopper to the designated slot on top of the blaster.
4. Attaching/Removing the Barrel and Stock
Customize your blaster with the removable barrel and extendable stock.
- Baril: Align the removable barrel with the front of the blaster and push until it locks into place. To remove, press the release button (if applicable) and pull the barrel off.
- Action: The stock can be extended or collapsed by pulling or pushing it. It can also be removed for a more compact setup.
Mode d'emploi
1. Mise sous tension et sélection du mode
The blaster offers both full-auto and semi-auto firing modes.
- Ensure the battery is installed and charged.
- Locate the mode selector switch (often a dial or lever).
- Sélectionnez le mode de tir souhaité : Entièrement automatique for continuous firing (up to 10 rounds per second) or Semi-automatique for single shots.
2. Tir avec le blaster
Once the blaster is set up and a mode is selected:
- Visez votre cible en veillant à ce qu'aucun œil ni visage ne se trouve dans la ligne de mire.
- Pull the trigger to fire.
3. Verrouillage de la gâchette
For safety, always engage the trigger lock when the blaster is not in active use.
- Locate the trigger lock mechanism (refer to the product diagram).
- Slide the lock into the engaged position to prevent accidental firing.
4. Vidéo officielle du produit
Entretien
1. Nettoyage
- After use, ensure all gel rounds are removed from the hopper and blaster.
- Wipe down the exterior of the blaster with a damp tissu. Ne pas immerger le pistolet laser dans l'eau.
- Periodically check the barrel for any obstructions and clear them carefully.
2. Stockage
- Rangez le pistolet dans un endroit frais et sec, à l'abri de la lumière directe du soleil.
- Remove the battery from the blaster if it will not be used for an extended period.
- Store hydrated gel rounds in an airtight container with a small amount of water to prevent dehydration.
Dépannage
If you encounter issues with your blaster, refer to the following table:
| Problème | Cause possible | Solution |
|---|---|---|
| Le blaster ne tire pas | Battery uncharged or improperly installed; Trigger lock engaged; No gel rounds in hopper. | Charge/reinstall battery; Disengage trigger lock; Load hopper with hydrated gel rounds. |
| Gel rounds not firing consistently | Gel rounds not fully hydrated; Obstruction in barrel; Damaged gel rounds. | Ensure rounds are fully hydrated (3-4 hours); Clear barrel obstruction; Use fresh, undamaged gel rounds. |
| Portée de tir courte | Battery low; Gel rounds not optimal size. | Charge battery fully; Ensure gel rounds are properly hydrated to 7.5mm. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Dimensions du produit | 14.37 x 11.14 x 11.61 pouces |
| Poids de l'article | 2.49 livres |
| Numéro de modèle de l'article | F8672 |
| Âge recommandé par le fabricant | 14 - 14 ans |
| Piles | 1 pile au lithium polymère requise (incluse) |
| Capacité de la trémie | 300 tours |
| Gel Rounds Included | 20,000 dehydrated |
| Modes de tir | Full-auto and Semi-auto |
| Rate of Fire (Full-Auto) | Jusqu'à 10 coups par seconde |
| Fabricant | Hasbro |
| Date de sortie | 24 février 2023 |
Garantie et assistance
For warranty information, product support, or to purchase replacement parts and additional gel rounds, please visit the official Nerf webconsultez le site ou contactez le service client de Hasbro.
Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.
Support en ligne: Visitez la boutique Nerf sur Amazon