SelfieShow Auto Tracking Phone Holder (Model Blanc) Instruction Manual

Introduction

Thank you for choosing the SelfieShow Auto Tracking Phone Holder. This device is designed to enhance your video recording and live streaming experience by automatically tracking your face and movements, ensuring you always stay in frame. This manual provides detailed instructions for setup, operation, and maintenance to help you get the most out of your new device.

Qu'y a-t-il dans la boîte

SelfieShow 360° Face Tracking Holder
Câble de données USB (Type-C)
Manuel d'instructions

Produit terminéview

Familiarize yourself with the components of your SelfieShow Auto Tracking Phone Holder.

Diagram showing the components of the SelfieShow Auto Tracking Phone Holder, including the intelligent lens, flip button, two shooting needs, and British 1/4 nut base.

Figure 1: Key components of the SelfieShow Auto Tracking Phone Holder.

Intelligent Lens: Built-in camera for AI-powered face and object tracking.
Bouton de basculement : Allows adjustment of the phone holder angle.
Téléphone Clamp: Maintient votre smartphone en toute sécurité.
Bouton d'alimentation : Allume/éteint l'appareil.
Port de chargement (Type-C) : Pour recharger la batterie interne.
1/4-inch Screw Thread Base: For mounting on tripods or other compatible accessories.

Installation

1. Chargement de l'appareil

Before first use, fully charge the device using the provided USB Type-C cable. Connect the cable to the charging port on the device and a standard USB power adapter (not included). The charging indicator light will show the charging status.

2. Fixer votre téléphone

Ouvrez délicatement le téléphoneamp.
Insérez votre smartphone dans la clamp, en veillant à ce qu'il soit maintenu en toute sécurité. Le clamp supports phones with widths between 40-80mm (1.6-3.14 inches).
Adjust the phone's position for optimal balance.

Image showing a smartphone being securely placed into the adjustable clamp of the tracking phone holder.

Figure 2: Securing your phone in the clamp.

3. Attaching to a Tripod (Optional)

The SelfieShow holder features a universal 1/4-inch screw thread at its base, allowing it to be mounted on most standard tripods or stands for increased stability and height.

Locate the 1/4-inch screw thread at the bottom of the device.
Align the device with the screw on your tripod.
Rotate the device clockwise until it is securely fastened to the tripod.

Image showing the 1/4-inch screw thread at the base of the phone holder being attached to a tripod mount.

Figure 3: Attaching the holder to a tripod.

Mode d'emploi

1. Marche/Arrêt

To power on: Press and hold the power button for 3 seconds. The indicator light will illuminate.
To power off: Press and hold the power button for 3 seconds. The indicator light will turn off.

2. Suivi automatique

The SelfieShow holder features built-in AI intelligent recognition technology. No app or Bluetooth connection is required.

Once powered on, the device will automatically scan its environment.
It will detect and track the nearest human face or object, rotating 360 degrees horizontally to keep it in the center of the frame.

Image demonstrating the auto-tracking feature, showing the phone holder rotating to follow a person's movement.

Figure 4: Auto tracking in action.

3. Contrôle gestuel

Contrôlez la fonction de suivi à l'aide de simples gestes de la main :

Commencer le suivi : Make an 'OK' gesture with your hand towards the intelligent lens. The device will begin tracking.
Pause du suivi : Raise your open palm towards the intelligent lens. The device will pause tracking.

Note: The effective distance for gesture control is within 1.5 meters (approximately 5 feet).

Image illustrating gesture controls: an 'OK' gesture to start tracking and an open palm gesture to stop tracking.

Figure 5: Gesture control for tracking.

4. Adjusting Shooting Angle and Orientation

Réglage de l'angle vertical : The phone holder can be manually adjusted from 0 to 180 degrees vertically to find your desired shooting angle.
Prise de vue horizontale/verticale : Le téléphone clamp allows for both horizontal (landscape) and vertical (portrait) phone orientations. Simply rotate your phone within the clamp pour basculer entre les modes.

Diagram showing the phone holder's ability to adjust 180 degrees vertically and rotate 360 degrees horizontally, supporting both landscape and portrait phone orientations.

Figure 6: Adjustable angle and rotation capabilities.

Chargement

The SelfieShow Auto Tracking Phone Holder has a built-in rechargeable lithium metal battery. A full charge provides approximately 5-6 hours of continuous use.

Connectez le câble USB Type-C fourni au port de chargement de l'appareil.
Connect the other end of the cable to a USB power source (e.g., wall adapter, computer USB port, power bank).
The indicator light will show red during charging and turn off when fully charged.

Entretien

Nettoyage: Utilisez un chiffon doux et sec pour nettoyer l'appareil. N'utilisez pas de nettoyants liquides ni de solvants.
Stockage: Conservez l'appareil dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.
Entretien de la batterie: Pour prolonger la durée de vie de la batterie, évitez de la décharger complètement trop souvent. Chargez l'appareil régulièrement, même en cas de non-utilisation prolongée.
Manutention: Manipulez l'appareil avec précaution. Évitez de le faire tomber ou de le soumettre à des chocs violents.

Dépannage

Problème	Cause possible	Solution
L'appareil ne s'allume pas.	Batterie faible.	Chargez complètement l'appareil à l'aide du câble USB Type-C fourni.
Tracking is not working or is erratic.	1. Insufficient lighting. 2. Subject is too far or too close. 3. Obstructions in front of the lens.	1. Ensure adequate lighting. 2. Position the subject within 1.5-3 meters (5-10 feet) for optimal tracking. 3. Ensure the intelligent lens is clear and unobstructed.
Le contrôle gestuel ne répond pas.	Subject is outside the effective gesture distance.	Ensure you are within 1.5 meters (5 feet) of the intelligent lens when performing gestures.
Le téléphone n'est pas tenu correctement.	Phone width exceeds clamp limites.	Ensure your phone's width is between 40-80mm (1.6-3.14 inches).

Caractéristiques

Dimensions du produit : 3.74 x 3.74 x 7.23 pouces
Poids de l'article : 7.8 onces
Numéro de modèle : Blanc
Piles : 1 pile Lithium Métal (incluse)
Connectivité : USB (pour le chargement)
Caractéristiques spéciales : Rotatable, Portable, Auto Tracking, Gesture Control, No App Required
Appareils compatibles : Mobile phones, Cameras (via 1/4-inch screw mount)
Modèles de téléphones compatibles : Universal (width 40-80mm)
Type de montage : Tripod (via 1/4-inch screw thread)

Vidéo officielle du produit

Video 1: An official product video demonstrating the features and usage of the SelfieShow Auto Tracking Phone Holder.

Garantie et assistance

For warranty information and customer support, please refer to the product packaging or contact SelfieShow customer service directly through their official webConsultez le site web ou le détaillant où le produit a été acheté. Conservez votre reçu d'achat pour toute réclamation au titre de la garantie.

SelfieShow Blanc