Introduction
This manual provides instructions for the safe and effective use of your Iaret Smart Watch USB Charging Cable. This cable is designed to provide reliable power to compatible smartwatches, specifically models I18 and I70, through a 2-pin, 2.5mm magnetic connector.
Produit terminéview
Image 1: The Iaret Smart Watch USB Charging Cable. This image displays the USB-A connector on one end and the 2-pin, 2.5mm magnetic charging head on the other, designed for smartwatches.
The Iaret Smart Watch USB Charging Cable features a standard USB-A connector for power input and a magnetic 2-pin, 2.5mm connector for output to your smartwatch. It is engineered for fast charging capabilities.
Compatibilité
This charging cable is specifically designed for use with the following smartwatch models:
- Iaret I18 Smartwatch
- Iaret I70 Smartwatch
Ensure your smartwatch has a 2-pin, 2.5mm magnetic charging port for proper compatibility.
Instructions d'installation
- Inspectez le câble : Before first use, visually inspect the charging cable for any signs of damage, such as frayed wires or bent pins. Do not use if damaged.
- Connectez-vous à la source d'alimentation : Insert the USB-A end of the charging cable into a compatible USB power adapter (e.g., wall charger, computer USB port, power bank). Ensure the power source provides stable 5V output.
- Préparer la montre connectée : Locate the charging port on your Iaret I18 or I70 smartwatch. Ensure the port is clean and free of debris.
- Se connecter à une montre connectée : Align the magnetic 2-pin connector of the cable with the charging contacts on your smartwatch. The magnets will help guide the connector into the correct position. A secure connection is indicated by the cable snapping firmly into place.
Operating Instructions (Charging)
Once the cable is properly connected to both a power source and your smartwatch:
- Vérifiez la connexion : Confirm that the charging icon or indicator appears on your smartwatch screen, signifying that charging has begun.
- Temps de charge : Charging times may vary depending on the smartwatch model and its current battery level. Refer to your smartwatch's manual for specific charging duration estimates.
- Déconnexion : Once your smartwatch is fully charged, gently pull the magnetic connector away from the smartwatch. Then, disconnect the USB-A end from the power source.
Note: Avoid leaving the smartwatch connected to the charger for extended periods after it is fully charged to prolong battery life.
Entretien
- Nettoyage: Use a soft, dry cloth to clean the cable and its connectors. Do not use liquid cleaners or abrasive materials.
- Stockage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable sharply to prevent internal damage.
- Manutention: Saisissez toujours les connecteurs lorsque vous branchez ou débranchez le câble, plutôt que de tirer sur le câble lui-même.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| La montre connectée ne charge pas. |
|
|
| Chargement lent. |
|
|
| Le câble semble endommagé. | Contraintes physiques ou usure. | Discontinue use immediately and replace the cable. |
Caractéristiques
- Marque: Iaret
- Numéro de modèle : I18-CC
- Type de connecteur : USB-A (input), 2-Pin 2.5mm Magnetic (output)
- Type de câble : USB
- Appareils compatibles : Iaret I18, Iaret I70 Smart Watches
- Dossier spécial : Chargement rapide
- Genre du connecteur : Homme à Homme
- Nombre de broches: 2
- Poids de l'article : 0.317 onces (environ 9 grammes)
- Dimensions du colis : 2.52 x 1.54 x 0.47 pouces
Garantie et assistance
Iaret products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the official Iaret website or contact customer service through your point of purchase. Please retain your proof of purchase for warranty claims.