1. Consignes de sécurité
- Lisez attentivement toutes les instructions avant le montage et l'utilisation.
- Pendant le montage, tenez les petites pièces hors de portée des enfants et des animaux domestiques.
- Ensure all screws and connections are tightened securely before placing plants or items on the stand.
- Distribute weight evenly across the shelves to maintain stability. The maximum load capacity is 22 pounds per shelf.
- Install the provided anti-toppling straps to prevent accidental tipping, especially in households with children or pets.
- Ne surchargez pas les étagères.
- Avoid exposing the grow lights directly to water.
2. Contenu du colis
Veuillez vérifier que tous les composants sont présents avant de commencer l'assemblage :
- Metal Frame (Curved Sections)
- MDF Wood Shelves (Various Sizes)
- Support Rods/Legs
- Adjustable Dual-Head LED Grow Lights (2 units)
- S-shaped Hooks (2 units)
- Anti-Toppling Straps
- Matériel de montage (vis, clé Allen)
- Manuel d'instructions
3. Configuration et assemblage
Follow these steps to assemble your GREENSTELL Plant Stand. It is recommended to assemble on a soft, clean surface to prevent scratches.
- Déballer les composants : Retirez soigneusement toutes les pièces de l'emballage et disposez-les. Vérifiez que le contenu de l'emballage correspond bien à la liste indiquée.
- Assembler les sections de base : Attach the shorter support rods to the bottom MDF shelves using the provided screws. Ensure they are firmly tightened.
- Attach Curved Metal Frames: Connect the curved metal frame sections to the assembled base units. The curved frame provides the main structure and upper shelves.
- Installez les étagères restantes : Secure the various sized MDF shelves to the metal frame and support rods according to the diagram in your printed manual.
- Attach Non-Slip Feet: Insert the non-slip feet into the bottom of the stand's legs to protect your floor and enhance stability.
- Installation des crochets en S : Attach the S-shaped hooks to the designated points on the top curved frame for hanging plants.
- Secure with Anti-Toppling Straps: For added safety, attach the anti-toppling straps to the top of the stand and secure them to a wall stud using appropriate hardware (not included).
- Position Grow Lights: Clip the adjustable dual-head LED grow lights to the shelves or frame as desired. The flexible goosenecks allow for precise positioning.
Vidéo 3.1 : Assemblage et présentationview of the GREENSTELL Plant Stand with Grow Lights.
4. Operating Instructions (Grow Lights)
The GREENSTELL Plant Stand includes two adjustable dual-head LED grow lights designed to promote healthy plant growth. Each light unit features a controller for various settings.
4.1 Grow Light Features:
- Luminosité réglable : 10 levels (10% to 100%).
- 3 modes de couleur : Blue light (promotes leaf growth), Red light (aids in flowering and fruiting), and Full Spectrum (combination).
- 3 Paramètres de la minuterie : Automatic shut-off after 3, 6, or 12 hours.
- 360° Rotatable & Movable: Flexible goosenecks and clip-on design allow for optimal light positioning for each plant.
4.2 Using the Grow Lights:
- Marche/Arrêt : Connect the USB plug to a compatible power adapter (not included) and press the power button on the controller.
- Régler la luminosité : Use the '+' and '-' buttons on the controller to cycle through the 10 brightness levels.
- Changer le mode couleur : Press the 'Mode' button to switch between Blue, Red, and Full Spectrum light modes.
- Régler la minuterie: Press the 'Timer' button to select 3H, 6H, or 12H. The light will automatically turn off after the selected duration.
5. Entretien
- Nettoyage: The MDF board shelves are designed to be easy to care for and wipe clean. Use a soft, damp cloth to wipe away dust or spills. Avoid harsh chemicals.
- Entretien du cadre : The metal frame can be wiped with a dry or slightly damp chiffon. Évitez les nettoyants abrasifs.
- Resserrez les connexions : Vérifiez régulièrement toutes les vis et les fixations pour vous assurer qu'elles restent bien serrées et sécurisées.
- Grow Light Care: Gently wipe the LED light bars with a dry cloth to remove dust. Do not immerse in water.
6. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Le support est bancal | Loose screws; uneven weight distribution; uneven floor. | Tighten all assembly screws. Redistribute plants/items evenly. Place the stand on a level surface or use shims if necessary. Ensure anti-toppling straps are installed. |
| Grow lights not turning on | Not plugged in; faulty power adapter; damaged cable. | Check if the USB plug is securely connected to a working power adapter and outlet. Try a different USB power adapter. Inspect the cable for visible damage. |
| Grow lights not changing modes/brightness | Dysfonctionnement du contrôleur. | Ensure the controller buttons are pressed firmly. If issues persist, contact customer support. |
| Assembly holes do not align | Orientation incorrecte des pièces ; défaut de fabrication. | Double-check the orientation of all pieces against the assembly diagrams. If parts are still misaligned, contact customer support for assistance. |
7. Spécifications
- Marque: GREENSTELL
- Numéro de modèle : hq-zwj001-01
- Dimensions du produit : 22.5 x 10.6 x 66.1 pouces (L xlxh)
- Poids de l'article : 38.6 livres
- Matériel: Engineered Wood (MDF), Iron
- Type de finition: Fer
- Couleur: Brun
- Capacité de charge: 22 livres par étagère
- Assemblage requis : Oui
- Caractéristiques spéciales : Adjustable Easy Install, Heavy Duty, Movable Grow Lights (Full-Spectrum LED with 10 brightness levels, 3 color modes, 3 timer settings), S-shaped hooks, Anti-toppling device.
- Code à barres : 810142983150
8. Garantie et assistance
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official GREENSTELL website. Please have your model number (hq-zwj001-01) and purchase date available when contacting support.
Support en ligne: Visit the GREENSTELL Store on Amazon