RYOBI ONE+ 18V Lithium-Ion 1.5 Ah Battery (PBP002) User Manual

1. Introduction et plusview

The RYOBI ONE+ 18V Lithium-Ion 1.5 Ah Battery (model PBP002) is designed to provide reliable power for a wide range of RYOBI ONE+ cordless tools. This compact and lightweight battery ensures consistent performance for various applications, enhancing the portability and efficiency of your tools.

Figure 1.1 : Devant view of the RYOBI ONE+ 18V Lithium-Ion 1.5 Ah Battery (PBP002) showing the fuel gauge LEDs.

2. Consignes de sécurité

Always read and understand all safety warnings and instructions before using this battery. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Ne pas immerse the battery in water or other liquids.
• Ne pas store the battery in direct sunlight or in temperatures exceeding 50°C (122°F).
• Ne pas court-circuitez les bornes de la batterie.
• Ne pas jeter les batteries au feu.
• Gardez la batterie hors de portée des enfants.
• Use only with RYOBI ONE+ compatible chargers.
• Si la batterie casing is cracked or damaged, ne pas utilise le.
• Recyclez ou jetez les piles conformément à la réglementation locale.

3. Installation

Proper setup ensures optimal performance and longevity of your battery.

3.1 Charge initiale

Fully charge the battery before its first use. Connect the battery to a compatible RYOBI ONE+ charger. The charger's indicator lights will display the charging status. Refer to your charger's manual for specific light patterns.

3.2 Installation de la batterie

To install the battery into a RYOBI ONE+ tool:

1. Alignez la batterie avec le port de batterie de votre outil RYOBI ONE+.
2. Insérez fermement la batterie en place jusqu'à entendre un clic, indiquant une connexion sécurisée.

Figure 3.1 : Illustrates the correct method for inserting the battery into a compatible RYOBI ONE+ tool.

4. Mode d'emploi

Once the battery is charged and installed, it is ready for operation.

4.1 Powering Tools

With the battery securely installed, your RYOBI ONE+ tool is ready for use. Refer to your specific tool's instruction manual for detailed operating procedures.

4.2 Indicateur de niveau de batterie

The battery features an on-board fuel gauge to indicate the remaining charge. Press the button on the battery to activate the LEDs. The number of illuminated LEDs corresponds to the approximate charge level:

• 4 LED : Charge de 75 à 100 %
• 3 LED : Charge de 50 à 75 %
• 2 LED : Charge de 25 à 50 %
• 1 LED : Charge de 0 à 25 % (rechargez bientôt)

Figure 4.1 : The battery's fuel gauge showing multiple illuminated LEDs, indicating a high charge level.

5. Entretien

Regular maintenance helps extend the life and performance of your battery.

5.1 Nettoyage

Keep the battery terminals clean and free of dust or debris. Use a dry, clean cloth to wipe the exterior of the battery. Ne pas use solvents or harsh chemicals.

5.2 Stockage

For long-term storage, store the battery in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to store the battery with a partial charge (approximately 50%) to help prolong its overall lifespan. Avoid storing fully discharged batteries.

5.3 Pratiques de facturation

Recharge batteries promptly after use, especially if they are fully discharged. Avoid leaving batteries on the charger for extended periods after they are fully charged, as this can reduce battery life.

6. Dépannage

If you encounter issues with your battery, refer to the following common troubleshooting steps.

6.1 La batterie ne se charge pas

• Ensure the charger is properly plugged into a working electrical outlet.
• Vérifiez que la batterie est correctement insérée dans le chargeur.
• Vérifiez que la batterie et le chargeur ne présentent aucun dommage visible. En cas de dommage, cessez de les utiliser.
• Allow the battery to cool down if it is hot from recent use; some chargers will not initiate charging until the battery reaches a safe temperature.

6.2 Tool Not Powering On

• Ensure the battery is fully charged. Check the fuel gauge.
• Verify that the battery is securely installed in the tool until it clicks into place.
• Check for any obstructions or issues with the tool itself. Refer to the tool's manual for specific troubleshooting.

7. Spécifications

8. Garantie

This RYOBI ONE+ 18V Lithium-Ion 1.5 Ah Battery (PBP002) comes with a Garantie de 30 jours from the date of purchase. Please retain your proof of purchase for all warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, unauthorized modifications, or normal wear and tear. For full warranty terms and conditions, please refer to the official RYOBI warranty documentation or website.

9. Assistance clientèle

For technical assistance, warranty claims, or product inquiries, please contact RYOBI Customer Support.

• Fabricant: RYOBI
• Lieu d'activité : One World Technologies Inc. PO Box 1288 Anderson SC 29622
• For the most up-to-date contact information and support resources, please visit the official RYOBI website.