tectake Bar Table with 4 Stools - Industrial Style

Introduction

Thank you for choosing the tectake Industrial Style Bar Table with 4 Stools. This manual provides important information for the safe assembly, operation, and maintenance of your new furniture set. Please read these instructions carefully before assembly and keep them for future reference.

Consignes de sécurité

• Avant l'assemblage, assurez-vous que tous les composants sont présents et en bon état. Ne pas utiliser si des pièces sont manquantes ou endommagées.
• Assemblez le produit sur une surface douce et propre afin d'éviter les rayures.
• Serrez fermement toutes les vis et tous les boulons, mais sans trop serrer pour éviter d'endommager le matériau.
• Vérifiez régulièrement tous les raccords pour vous assurer qu'ils restent bien serrés.
• Do not exceed the maximum load capacity for the table (75 kg) and stools (150 kg per stool).
• Gardez les petites pièces et les matériaux d’emballage hors de portée des enfants pour éviter tout risque d’étouffement.
• This product is designed for indoor use. Avoid prolonged exposure to moisture or direct sunlight.

Contenu du colis

Before starting assembly, please verify that all the following components are included in your package:

• 1 x Table de bar
• 4 x Bar Stools
• 1 x Set of Assembly Hardware (screws, bolts, Allen key, etc.)
• 1 x Manuel d'assemblage (ce document)

Image: Detailed diagram of product dimensions and included components.

Instructions de montage

Follow these steps carefully to assemble your tectake bar table and stools. It is recommended to have two people for assembly.

1. Déballer les composants : Carefully remove all parts from the packaging and lay them out on a clean, soft surface to avoid scratches. Identify each component using the parts list in the assembly hardware set.
2. Assembler le cadre de la table : Attach the table legs to the long and short crossbars using the provided screws and Allen key. Ensure all connections are finger-tight before fully tightening.
3. Fixer le plateau de table : Place the tabletop upside down on a soft surface. Align the assembled table frame with the pre-drilled holes on the underside of the tabletop. Secure the tabletop to the frame using the appropriate screws.
4. Assembler les cadres de tabourets : For each stool, attach the four legs to the seat frame using the provided screws. Ensure the footrests are correctly oriented.
5. Fixer les sièges de tabouret : Place each stool seat upside down. Align the assembled stool frame with the pre-drilled holes on the underside of the seat. Secure the seat to the frame.
6. Installer les pieds réglables : Screw the adjustable plastic feet into the bottom of each table leg and stool leg. These feet protect your floor and allow for minor height adjustments to ensure stability.
7. Serrage final : Once all components are assembled, carefully place the table and stools upright. Systematically tighten all screws and bolts using the Allen key. Do not overtighten.

Image: Stable feet with screw-in adjusters and resistant MDF tabletops.

Image: Features including adjustable feet and space-saving stool storage.

Mode d'emploi

The tectake bar table and stools are designed for daily use in your home. Here are some guidelines for optimal use:

• Stabilité: Use the adjustable plastic feet on both the table and stools to compensate for uneven floors. Turn the feet clockwise or counter-clockwise until the furniture is stable and does not wobble.
• Gain de place : The stools are designed to fit neatly under the table when not in use, maximizing your floor space.
• Capacité de charge: Do not place items heavier than 75 kg on the table. Each stool can support a maximum weight of 150 kg.
• Placement: Position the furniture on a flat, stable surface. Avoid placing it near heat sources or in direct sunlight for extended periods to prevent material damage.

Image: tectake bar table and stools in use.

Entretien

Proper care will extend the life and appearance of your tectake furniture set:

• Nettoyage: Wipe surfaces with a dry cloth. For more stubborn marks, use a slightly damp cloth and mild detergent, then dry immediately with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals.
• Contrôles réguliers : Periodically inspect all screws and bolts to ensure they are tight. Retighten if necessary.
• Protection: Use coasters or placemats to protect the tabletop from spills, heat, and scratches.
• Environnement: Keep the furniture in a dry environment. Avoid extreme temperature changes and high humidity.

Dépannage

If you encounter any issues with your tectake bar table and stools, please refer to the following common solutions:

• Table/tabouret bancal :
  • Check if all screws and bolts are securely tightened.
  • Adjust the plastic feet on the bottom of the legs to level the furniture on uneven surfaces.
• Difficultés rencontrées lors du montage :
  • Ensure you are using the correct hardware for each step as indicated in the assembly instructions.
  • Do not overtighten screws until all parts are loosely fitted, then tighten them gradually.
  • Refer to the assembly diagrams for correct orientation of parts.
• Rayures ou bosses :
  • Minor scratches on the MDF surface can sometimes be minimized with furniture polish or a touch-up pen matching the wood finish.
  • Prevent future damage by using protective pads under items placed on the table.

Caractéristiques

Garantie et assistance

tectake products are manufactured to high-quality standards. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.

For technical support, missing parts, or any questions regarding your product, please contact tectake customer service through their official website or the retailer where you purchased the product. Please have your model number (404306) and purchase date ready when contacting support.

You can visit the tectake store for more information: Boutique officielle tectake