Manuel d'utilisation du kit GEEKVAPE Aegis Solo 2 / S100

1. Produit terminéview

The GEEKVAPE Aegis Solo 2 (S100) Kit is designed for durability and performance, featuring 2nd generation Tri-Proof technology for enhanced protection against water, dust, and shock. Its compact design offers a comfortable grip while maintaining a robust metallic aesthetic.

Caractéristiques principales :

• IP68 Rating for water and dust resistance
• 1.08" Full Screen Display for clear information
• Compatible with Z Sub-Ohm 2021 Tank
• Puissance de sortie maximale de 100 W
• Powered by a single 18650 battery (NOT INCLUDED)

Image 1.1: The GEEKVAPE Aegis Solo 2 S100 Kit showcasing its available color options.

2. Guide de configuration

2.1 Installation de la batterie

The Aegis Solo 2 / S100 Kit requires a single 18650 batterie for operation. Please note that the battery is NON inclus in the package and must be purchased separately.

1. Unscrew the battery cap located at the bottom of the device by turning it counter-clockwise.
2. Insert a fully charged 18650 battery into the battery compartment, ensuring the positive (+) and negative (-) terminals align correctly as indicated inside the compartment.
3. Screw the battery cap back on clockwise until it is securely tightened.

2.2 Tank Assembly and Coil Installation

The kit includes the Z Sub-Ohm 2021 Tank. Follow these steps to assemble and prepare the tank:

1. Unscrew the base of the tank from the main body.
2. Insert a compatible Z Series coil into the tank from the bottom, ensuring it is firmly seated.
3. Screw the base back onto the tank body.
4. Screw the assembled tank onto the 510 connector of the Aegis Solo 2 mod until snug.

Image 2.1: Exploded diagram of the Z Sub-Ohm Tank components.

2.3 E-liquid Filling

To fill the Z Sub-Ohm 2021 Tank:

1. Locate the top cap of the tank.
2. Push the top cap to slide it open, revealing the filling port.
3. Insert the nozzle of your e-liquid bottle into the filling port and gently squeeze to fill the tank. Avoid filling into the central airflow tube.
4. Once filled, slide the top cap back into place until it clicks shut.
5. After filling a new coil, allow the e-liquid to soak into the coil for at least 5-10 minutes before first use to prevent dry hits.

3. Mode d'emploi

3.1 Mise sous/hors tension

To turn the device on or off, rapidly press the fire button 5 fois dans les 2 secondes.

3.2 Réglage de l'eautage

Utilisez les boutons de réglage « + » et « - » situés sous l'écran pour augmenter ou diminuer la puissance.tage output. The wattage range is typically 5W to 100W.

3.3 Informations d'affichage à l'écran

The 1.08" full screen display provides essential information about your device's status:

• Niveau de batterie : Indicated by an icon and percentage.
• Quoitage: Puissance de sortie actuelle.
• Coil Resistance (Ω): Resistance of the installed coil.
• Voltage (V): Volume de sortietage.
• Compteur de bouffées : Enregistre le nombre de bouffées prises.

Image 3.1 : Gros plan view of the Aegis Solo 2 S100's 1.08" display screen.

3.4 Locking/Unlocking the Device

The Aegis Solo 2 features a convenient A-Lock switch on the side of the device. Slide the switch up to lock the device and prevent accidental firing or wattage adjustments. Slide it down to unlock.

4. Entretien

4.1 Nettoyage

• Regularly clean the 510 connector on the mod and the base of the tank with a dry cloth or cotton swab to ensure good conductivity.
• For the tank, disassemble it and rinse the glass and metal parts (excluding the coil) with warm water. Allow all parts to dry completely before reassembly.

Remplacement de la bobine 4.2

Coils are consumable parts and need to be replaced regularly, typically every 1-2 weeks depending on usage and e-liquid. Replace the coil when you notice a burnt taste, reduced vapor production, or diminished flavor.

1. Ensure the tank is empty of e-liquid.
2. Unscrew the tank from the mod.
3. Unscrew the base of the tank.
4. Pull out the old coil from the tank.
5. Insert a new Z Series coil firmly into place.
6. Reassemble the tank and fill with e-liquid, allowing time for the new coil to prime.

4.3 Entretien général

• Tenez l'appareil à l'écart des températures extrêmes (chaudes ou froides) et de la lumière directe du soleil.
• Rangez l'appareil dans un endroit sec lorsqu'il n'est pas utilisé.
• Avoid dropping the device, despite its shock resistance, to prevent internal damage.

5. Dépannage

5.1 L'appareil ne s'allume pas

• Ensure the 18650 battery is correctly inserted with the correct polarity.
• Check if the battery is charged. If not, charge it using an external battery charger.
• Press the fire button 5 times rapidly to power on the device.

5.2 Absence de vapeur ou faible vapeur

• Check the e-liquid level in the tank.
• Ensure the coil is properly installed and not burnt out. Replace if necessary.
• Ajustez le wattage to a suitable level for your coil's resistance.
• Ensure the device is not locked (check A-Lock switch).

5.3 Leaking Tank

• Ensure all tank components are securely tightened, especially the coil and base.
• Check the O-rings for damage or displacement. Replace if needed.
• Évitez de trop remplir le réservoir.
• Ensure the top cap is fully closed after filling.

5.4 Écran non fonctionnel

• Assurez-vous que l'appareil est sous tension.
• Vérifiez la charge de la batterie.
• If the issue persists, try removing and reinserting the battery.

6. Spécifications

7. Garantie et assistance

Pour obtenir des informations sur la garantie et une assistance technique, veuillez consulter le site officiel de GEEKVAPE. webConsultez le site web ou contactez le revendeur auprès duquel vous avez acheté le produit. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.

This product is intended for adult users only. Please adhere to all local laws and regulations regarding vaping products.