Manuel d'utilisation de la montre de plongée automatique Spinnaker Fleuss SP-5055

Introduction

Thank you for choosing the Spinnaker Fleuss SP-5055 Automatic Dive Watch. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. Please read it carefully to ensure optimal performance and longevity of your watch.

Image: Spinnaker Fleuss SP-5055 automatic dive watch with oxblood red dial and black leather strap on a wrist.

Installation

1. Enroulement initial

Your Spinnaker Fleuss watch is powered by an automatic Miyota 8215 movement. Before wearing for the first time, or if the watch has stopped, it needs to be manually wound. To do this:

1. Unscrew the crown counter-clockwise until it pops out to position 1.
2. Turn the crown clockwise approximately 20-30 times. This will initiate power reserve.
3. Repoussez la couronne et vissez-la dans le sens des aiguilles d'une montre pour garantir l'étanchéité.

The watch will then continue to wind itself through the motion of your wrist while worn.

2. Réglage de l'heure et de la date

Pour régler l'heure et la date sur votre montre :

1. Unscrew the crown counter-clockwise until it pops out to position 1.
2. Pull the crown out to position 2 (first click) to set the date. Turn the crown clockwise or counter-clockwise until the correct date is displayed.
3. Pull the crown out further to position 3 (second click) to set the time. Turn the crown to move the hands clockwise until the correct time is displayed. Ensure to account for AM/PM when setting the date.
4. Once time and date are set, push the crown back into position 1 and screw it down clockwise firmly to maintain water resistance.

Image : Côté view of the Spinnaker Fleuss SP-5055 watch, highlighting the stainless steel case and crown.

Utiliser votre montre

1. Mouvement automatique

The Miyota 8215 movement is an automatic mechanical movement. It is powered by the natural motion of your wrist. When fully wound, it has a power reserve of approximately 42 hours. If the watch is not worn for an extended period, it may stop and require manual winding as described in the Setup section.

2. Unidirectional Rotating Bezel

The Spinnaker Fleuss features a unidirectional rotating bezel, designed for dive timing. To use it:

1. Align the bezel's zero marker with the minute hand at the start of your dive or timed event.
2. The bezel rotates only counter-clockwise, preventing accidental increases in elapsed time.
3. Read the elapsed time by noting the position of the minute hand against the bezel's scale.

3. Résistance à l'eau

This watch is water resistant to 150 meters (15 ATM). This rating makes it suitable for swimming, snorkeling, and recreational diving. Always ensure the crown is fully screwed down before exposing the watch to water. Do not operate the crown while the watch is submerged or wet.

Image: Spinnaker Fleuss SP-5055 watch dial glowing in the dark, showcasing the luminous hands and hour markers.

Entretien

1. Nettoyage

Pour préserver l'apparence de votre montre :

• Essuyez régulièrement le boîtier et le verre avec un chiffon doux et sec.
• Pour les pièces en acier inoxydable, une légère damp On peut utiliser un chiffon, puis un chiffon sec.
• Évitez d'utiliser des produits chimiques agressifs ou des matériaux abrasifs, car ils peuvent endommager la finition de la montre.

2. Entretien du bracelet en cuir

Le bracelet en cuir est sensible à l'usure due à l'humidité, à la transpiration et à la lumière directe du soleil. Pour prolonger sa durée de vie :

• Avoid prolonged exposure to water. If it gets wet, dry it gently with a soft cloth and allow it to air dry completely.
• Évitez la lumière directe du soleil et les températures extrêmes.
• Clean with a specialized leather cleaner if necessary, following product instructions.

3. Service professionnel

For optimal performance, it is recommended to have your automatic watch serviced by a qualified watchmaker every 3-5 years. This includes checking the movement, seals, and water resistance.

Dépannage

• Montre non fonctionnelle : If the watch has stopped, manually wind it by turning the crown clockwise 20-30 times after unscrewing it to position 1. Ensure it is worn regularly to keep the automatic movement powered.
• Heure inexacte : Automatic movements can vary slightly in accuracy. If your watch is consistently gaining or losing significant time, it may require regulation by a professional watchmaker.
• Date non modifiable : Ensure the time is set correctly, accounting for AM/PM. The date typically changes around midnight. If the date changes at noon, advance the time by 12 hours.
• Fuite d'eau : If you suspect water has entered the watch, immediately take it to a professional watchmaker for inspection and repair to prevent further damage. Always ensure the crown is fully screwed down before water exposure.

Caractéristiques

Image: Close-up of the Spinnaker Fleuss SP-5055 watch case back, showing the automatic movement and engraved specifications.

Vidéos officielles des produits

Garantie et assistance

Informations sur la garantie

Your Spinnaker Fleuss watch comes with a manufacturer's warranty covering defects in materials and workmanship under normal use. The specific terms and duration of the warranty are typically included with your purchase documentation. Please refer to the warranty card or contact Spinnaker customer support for detailed information.

Assistance clientèle

For any questions, service requests, or support needs regarding your Spinnaker Fleuss watch, please visit the official Spinnaker website or contact their customer service department. Contact details can usually be found on the brand's website ou dans les matériaux d'emballage.