Manuel d'utilisation du NVR 4K 10 canaux SECULINK

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your SECULINK 10-Channel 4K Network Video Recorder (NVR). This NVR is designed to manage and record video footage from compatible IP cameras, offering advanced features such as 4K Ultra HD video support, H.265+ compression, motion detection recording, and remote access capabilities. Please read this manual thoroughly before using the device to ensure proper setup and optimal performance.

Caractéristiques du produit

• Ultra HD Video: Supports full 4K video viewing on all 10 channels, compatible with 8MP/5MP/4MP/3MP/1080p ONVIF Conformance IP cameras for crystal clear image capture.
• H.265+ Compression Technology: Enhances bandwidth and storage efficiency, resulting in smaller file sizes, higher definition, and extended recording times. Supports simultaneous network transmission and playback.
• Enregistrement de détection de mouvement : Configures the NVR to initiate recording only when motion is detected, optimizing storage space and providing intelligent event-based recording.
• Installation facile : Requires a direct wired Ethernet connection to your router for operation. Simplifies management of all connected IP cameras on your network.
• Plusieurs options de stockage : Supports up to 6TB HDD (sold separately) and Cloud Storage Service (sold separately). Backup options include USB Flash Disk, USB DVR Writer, and network backup.
• P2P Remote Access: Cloud P2P function enables remote viewing on smartphones, tablets, and PCs via the XMeye App, allowing 24/7 monitoring from any location.

Image: Visual comparison of different video resolutions supported by the NVR, including 720P, 1080P, 4MP, 5MP, and Ultra HD 4K (3840x2160).

Image: Diagram illustrating the storage efficiency of H.265+ compression compared to H.264, showing significant reduction in storage requirements.

Contenu du colis

Veuillez vérifier que tous les articles sont présents et en bon état à l'ouverture du colis :

• 1x SECULINK 10-Channel Network Video Recorder (NVR)
• 1x Adaptateur secteur
• 1x souris USB
• Note: Hard drive (HDD) is not included and must be purchased separately.

Produit terminéview

Panneau avant

Image : Vue de dessus view of the SECULINK NVR showing the front panel with "Power" and "Record" indicators, and a rear view displaying all ports.

The front panel of the NVR typically includes LED indicators for power and recording status. These indicators provide quick visual confirmation of the device's operational state.

• Indicateur d'alimentation : S'allume lorsque le NVR est mis sous tension.
• Indicateur d'enregistrement : Flashes or illuminates to indicate active video recording.

Panneau arrière

Image: Close-up of the NVR's rear panel, clearly labeling the VGA, HDMI, LAN (RJ45), USB, and DC 12V power input ports.

The rear panel provides all necessary connection ports for the NVR:

• Sortie VGA: Connects to a monitor or display via a VGA cable.
• Sortie HDMI : Connects to a monitor or display via an HDMI cable for high-definition video output.
• Port LAN (RJ45) : Connects the NVR to your network router using an Ethernet cable.
• USB Ports (2x USB2.0): Used for connecting the included USB mouse, external storage devices for backup, or for firmware updates.
• Entrée d'alimentation CC 12V : Connects the provided power adapter to supply power to the NVR.
• Sortie audio (RCA) : For connecting to an audio system (if supported by your setup).

Guide d'installation

1. Hard Drive (HDD) Installation (HDD Not Included)

The NVR requires an internal SATA hard drive for video storage. Follow these steps to install a compatible 3.5" SATA HDD (up to 6TB recommended):

1. Twist down the screws of the DVR: Carefully remove the screws securing the NVR's cover.
2. Access the hard disk: Gently slide open the cover to expose the internal components. Connect the SATA data cable and power cable from the NVR to the corresponding ports on the hard drive.
3. Install the screws: Secure the hard drive inside the NVR chassis using the provided screws. Replace the NVR cover and secure it with its screws.

Image: Visual instructions detailing the three steps for HDD installation: unscrewing the cover, connecting the SATA cables, and securing the HDD with screws.

2. Connexions système

Connect the NVR to your network and display as follows:

• Connect the NVR's LAN port to your router using an Ethernet cable.
• Connect the NVR's HDMI or VGA output to a monitor or TV.
• Connectez la souris USB à l'un des ports USB du NVR.
• Connect the power adapter to the NVR's DC 12V input and plug it into a power outlet.

Image: A schematic diagram illustrating the network setup, showing IP cameras wirelessly connecting to a router, which is then wired to the NVR, and the NVR connected to a monitor and mouse.

3. Connexion de la caméra

The NVR will automatically detect and add ONVIF-compliant IP cameras connected to the same network. Ensure your IP cameras are powered on and properly configured on your network before attempting to add them to the NVR.

• Access the NVR's interface via the connected monitor and mouse.
• Navigate to the camera management section (refer to the on-screen menu).
• The NVR should list available IP cameras on your network. Select and add them as required.

Mode d'emploi

Modes d'enregistrement

The NVR offers flexible recording options to suit your surveillance needs:

• Enregistrement continu 24h/24 et 7j/7 : Disques footage continuously throughout the day and night.
• Enregistrement de mouvement : The NVR is triggered to record only when motion is detected by the connected cameras. This conserves storage space.
• Enregistrement programmé : Set specific times or days for the NVR to record, allowing for customized recording schedules.

Image: Visual representation of the three primary recording modes: 24/7 Continuous Record, Motion Recording (triggered by movement), and Scheduled Recording (based on a set timetable).

Image: Flowchart demonstrating the motion detection recording process: Standby Mode -> Motion Detection Mode-Record -> Standby Mode again if no motion.

Télécommande Viewing with Mobile App

The SECULINK NVR supports remote viewing via the XMeye Pro mobile application, available for both Android and iOS devices. This allows you to monitor your premises from anywhere with an internet connection.

• Téléchargez le XMeye Pro APP from Google Play Store or Apple App Store. You can also scan the QR code provided in the image below or visit http://d.xmeye.net/Xmeye.
• Enregistrez un compte et connectez-vous.
• Add your NVR device to the app using its unique device ID or by scanning the QR code displayed on the NVR's interface.
• Une fois ajouté, vous pouvez view flux en direct, lecture d'enregistrementstage, and receive motion alerts directly on your mobile device.

Image: Displays the XMeye Pro app interface on a smartphone, tablet, laptop, and desktop, along with QR codes and logos for downloading the app from Google Play and the App Store.

Image: Depicts a security camera detecting motion and an instant alert message being pushed to a mobile device via the XMeye app, showing the time and channel of the detected event.

Entretien

Gestion du disque dur

Regularly check the status of your hard drive through the NVR's system settings to ensure it is functioning correctly. If the hard drive becomes full, the NVR will typically overwrite the oldest footage. You can configure this behavior in the system settings.

Mises à jour du firmware

Periodically check the SECULINK official website or contact customer support for available firmware updates. Firmware updates can improve system stability, add new features, and enhance security. Follow the provided instructions carefully when performing updates to avoid damaging the device.

Dépannage

Caractéristiques

Consignes de sécurité

Veuillez respecter les consignes de sécurité suivantes afin d'éviter toute blessure ou tout dommage à l'appareil :

Image: A warning label indicating "CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN" and "WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE." It also states "NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL."

• Risque de choc électrique : Do not open the NVR casing. L'appareil ne contient aucune pièce réparable par l'utilisateur. Toute réparation doit être effectuée par un technicien qualifié.
• Risque d'incendie et d'électrocution : To prevent fire or electric shock, do not expose this appliance to rain or moisture. Do not use units not specifically designed for outdoor use in wet conditions.
• Ventilation: Assurez une ventilation adéquate autour du NVR pour éviter toute surchauffe. Ne bloquez pas les ouvertures de ventilation.
• Source d'alimentation : Utilisez uniquement l'adaptateur secteur fourni. Assurez-vous que la source d'alimentation corresponde au volume.tage requirements of the NVR.
• Nettoyage: Disconnect the NVR from the power source before cleaning. Use a dry cloth for cleaning. Do not use liquid cleaners or aerosol cleaners.

Garantie et assistance

For detailed warranty information, please refer to the warranty card included with your product or contact SECULINK customer support. For additional assistance, you may refer to the official User Guide PDF available online:

Télécharger le guide d'utilisation officiel (PDF)

For technical support or inquiries, please visit the SECULINK official website or contact their customer service department. Keep your product model number (NVR1110PF-4K) and purchase information ready when seeking support.