LEDVANCE 65636
Sylvania 32ft RGB Flexible Light Strip Starter Kit Instruction Manual
Modèle : 65636 | Marque : LEDVANCE
Informations importantes sur la sécurité
- Utilisation en intérieur uniquement : This product is designed for indoor use in dry locations. Do not expose to water or high humidity.
- Sécurité électrique : Ensure the power adapter is connected to a suitable power outlet. Do not overload electrical circuits.
- Instructions de coupe : The LED strips can be cut for customized length. Only cut along the designated markings to avoid damaging the strip.
- Installation: Débranchez toujours l’alimentation avant l’installation ou la maintenance.
- Chaleur: Do not cover the LED strips with materials that may trap heat, as this can cause overheating.
- Enfants: Gardez le produit et ses composants hors de portée des enfants.
Contenu du colis
Vérifiez que tous les composants sont présents dans votre colis :
- (2) 16.4ft RGB Flexible LED Light Strips
- (1) Alimentation
- (1) IR Remote Controller (with battery included)
- (20) Clips de montage
Image: Main product image showing the light strips, remote, power adapter, and clips.
Configuration et installation
- Préparez la surface : Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the clips.
- Connecter les composants : Connect the LED light strips to the controller, ensuring the arrows on the connectors align. Then, connect the power supply to the controller.
- Fonctionnalité de test : Before permanent mounting, plug in the power supply and use the remote control to test the light strips. Verify all colors and modes function correctly.
- Customize Length (Optional): If a shorter length is desired, only cut the LED strips along the designated cutting marks (usually indicated by a scissor icon or copper pads). Cutting elsewhere will damage the strip.
- Mount the Strips: Remove the adhesive outer layer from the back of the mounting clips and press firmly for five seconds when mounting. Use the provided clips to secure the light strips in your desired location, such as under cabinets, behind TVs, or along shelves.
- Activer la télécommande : Remove the plastic tab from the remote control's battery door to activate the battery.
Image: Step-by-step diagram illustrating how to connect the light strips, identify cutting points, and mount them using clips.
Opération
The Sylvania RGB Flexible Light Strips are controlled using the included IR remote. Ensure the remote is pointed towards the IR receiver on the controller for optimal response.
Fonctions de la télécommande :
- MARCHE/ARRÊT : Power the light strips on or off.
- Sélection de couleur : Choisissez parmi 16 couleurs statiques à l'aide des boutons de couleur.
- Atténuation: Adjust the brightness of the selected color or dynamic mode.
- Modes dynamiques : Select from 4 pre-programmed dynamic modes (e.g., Flash, Strobe, Fade, Smooth) to create different lighting effects.
Image: Detailed illustration of the IR remote control, highlighting buttons for power, color selection, dimming, and dynamic modes.
Entretien
- Nettoyage: Gently wipe the LED strips with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Durée de vie: The LED technology provides a long operational life of up to 30,000 hours under normal use conditions.
- Remplacement de la batterie à distance : If the remote control becomes unresponsive, replace the CR2025 lithium coin cell battery.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Les lumières ne s'allument pas. | Power connection issue, remote battery dead, IR receiver blocked. | Check all connections (power supply, controller, strips). Ensure arrows on connectors align. Replace remote battery. Ensure remote is pointed at the IR receiver without obstruction. |
| La télécommande ne répond pas. | Remote battery dead, remote too far, IR receiver blocked. | Replace remote battery. Ensure remote is within range and pointed directly at the IR receiver. Remove any obstructions between the remote and receiver. |
| Some sections of the light strip are not lighting up. | Damaged section, incorrect cutting. | Inspect the strip for physical damage. If a section was cut incorrectly, it may be permanently damaged. Ensure connections are secure. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | 65636 |
| Marque | LEDVANCE (Sylvanie) |
| Couleur | RGB (16 colors) + White |
| Longueur | 32ft (2 x 16.4ft strips) |
| Usage | Uniquement en intérieur |
| Caractéristiques spéciales | Couleurs changeantes, intensité variable, économe en énergie |
| Type de source lumineuse | DIRIGÉ |
| Source d'énergie | Électrique avec fil |
| Type de contrôleur | Télécommande IR |
| Voltage | 12 volts |
| Quoitage | 24 watts |
| Connectivité | Infrarouge |
| Matériel | Plastique |
| Poids de l'article | 10.88 onces |
| Durée de vie | Jusqu'à 30,000 XNUMX heures |
| Résistance à l'eau | Non résistant à l'eau |
| Code UPC | 046135656361 |
Garantie et assistance
This Sylvania LED Flexible Light Strip Starter Kit is backed by a Garantie constructeur d'un an.
Pour obtenir une assistance technique, faire valoir votre garantie ou obtenir des informations supplémentaires sur le produit, veuillez consulter le site officiel de LEDVANCE. website ou contactez leur service client.
Vous pouvez également visiter le Boutique LEDVANCE sur Amazon Pour plus de produits et d'informations.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.