EUGAD Modular Pet Enclosure (Model 0028WL) Instruction Manual

Introduction

Thank you for choosing the EUGAD Modular Pet Enclosure. This versatile enclosure provides a safe and customizable space for your small pets. Please read this manual carefully before assembly and use to ensure proper setup and long-term enjoyment.

Contenu du colis

Avant de commencer l'assemblage, veuillez vérifier que tous les composants énumérés ci-dessous sont présents et non endommagés.

Image: All components included in the EUGAD Modular Pet Enclosure package, showing panels, connectors, a wooden mallet, and cable ties.

• Modular Panels (35x45 cm and 35x35 cm)
• Connecteurs ABS
• Wooden Mallet
• Colliers de serrage
• Patins antidérapants

Instructions d'installation

Follow these steps to assemble your EUGAD Modular Pet Enclosure. Ensure you have a clear, flat surface for assembly.

Étape 1 : Préparez la base

Lay out the bottom panels (35x35 cm or 35x45 cm depending on your desired configuration) on a flat surface. Ensure the smooth side of the panel faces upwards, and the side with edges faces downwards. Connect these panels using the ABS connectors.

Image: Un surcoût view of the pet enclosure base, showing how panels are connected to form the floor of the playpen.

Step 2: Assemble the Walls

Attach the side panels to the base using the ABS connectors. Ensure all panels are securely fitted into the connectors. You can create various shapes such as L-shape, square, or rectangular playpens.

Image: A fully assembled EUGAD pet enclosure in a rectangular configuration, demonstrating its use in an indoor setting.

Step 3: Reinforce Connections

Use the provided wooden mallet to gently tap on the connectors, ensuring all panels are firmly seated and the structure is stable. For added stability, use the cable ties to reinforce the connections between panels, especially at the top corners.

Image: Plusieurs examples of the EUGAD modular pet enclosure configured in different shapes, showcasinet sa polyvalence.

Step 4: Apply Non-slip Pads

Attach the non-slip pads to the bottom of the connectors to protect your floor from scratches and prevent the enclosure from sliding.

Image: A close-up showing the application of a non-slip pad to an enclosure connector, enhancing stability and protecting floors.

Guide vidéo d'assemblage

For a visual guide on assembly, please watch the official EUGAD video below:

Mode d'emploi

Emplacement et utilisation

Ce boîtier est conçu pour utilisation en intérieur uniquement. Place it in a suitable area such as a living room, hallway, or balcony. Avoid outdoor use, as exposure to sunlight and rain can accelerate rust on metal parts and aging of plastic components.

The modular design allows for flexible configurations to suit your space and your pet's needs. You can create L-shaped, square, or rectangular playpens. For animals with strong jumping abilities, consider using two sets of panels to create a two-level enclosure with a height of 90 cm.

Image: A diagram illustrating the dimensions of the modular panels (35x45 cm and 35x35 cm) and examples of small animals suitable for the enclosure, including rabbits, guinea pigs, and hamsters.

Animaux appropriés

The enclosure is suitable for small animals such as hamsters, chinchillas, guinea pigs, puppies, rabbits, kittens, and hedgehogs. Ensure the enclosure size is appropriate for your pet's breed and activity level.

Entretien

Nettoyage

The panels are waterproof and easy to clean. Use a damp cloth and mild soap to wipe down surfaces. Avoid abrasive cleaners that could damage the material. Ensure the enclosure is completely dry before reintroducing your pet.

Inspection

Regularly inspect all connectors and panels for any signs of wear or damage. Replace any broken or weakened parts immediately to maintain the safety and integrity of the enclosure.

Dépannage

• L'enceinte semble instable : Ensure all panels are fully inserted into the connectors. Use the provided mallet to gently tap the connectors until they are secure. Reinforce connections with cable ties.
• Panels not fitting together: Check that you are using the correct panels for the desired configuration. Ensure connectors are oriented correctly.
• Animal de compagnie tentant de s'échapper : For pets with strong jumping abilities, consider increasing the height of the enclosure by purchasing an additional set of panels to create a two-level structure (up to 90 cm).
• Floor scratches: Verify that all non-slip pads are correctly attached to the bottom of the connectors.

Caractéristiques

Garantie et assistance

For warranty information or customer support, please refer to the contact details provided with your purchase or visit the official EUGAD webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat.

Note: Les informations relatives à la disponibilité des pièces détachées ne figurent pas dans les spécifications du produit.