1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your XUKEY Universal 4-Way Windshield Washer Nozzles. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Image 1.1: XUKEY Universal 4-Way Windshield Washer Nozzles. These nozzles are designed to provide an efficient spray pattern for windshield cleaning.
2. Consignes de sécurité
Always exercise caution when working on your vehicle. Ensure the vehicle is turned off and the parking brake is engaged. Wear appropriate personal protective equipment, such as gloves and eye protection, if necessary. Keep small parts away from children.
3. Contenu du colis
Vérifiez que tous les éléments sont présents dans le colis :
- 2 x XUKEY Universal 4-Way Windshield Washer Nozzles
4. caractéristiques du produit
- Matériel: Constructed from durable Copper and ABS plastic.
- Conception: Features a 4-way adjustable jet design for comprehensive windshield coverage.
- Installation: Snap-on design for quick and easy attachment to wiper arms.
- Compatibilité: Suitable for wiper arms with a diameter of 0.31–0.35 inches (8–9mm).
- Fonction: Designed to effectively spray away dirt and grime, contributing to driving safety and extending wiper blade life.
Image 4.1 : Détail view of the nozzle features, including the 4-hole adjustable design and snap-on mechanism.
5. Configuration et installation
The installation process is designed to be straightforward and typically takes only a few minutes.
- Prepare the Wiper Arm: Ensure the existing washer nozzle is removed from the wiper arm. Clean the area if necessary.
- Fixez la buse : Clip the XUKEY 4-way adjustable jet nozzle onto your wiper arm. The snap-on design secures it in place. Ensure it is firmly seated.
- Reconnect the Tube: Reconnect the washer fluid tube to the inlet connection of the new nozzle. Ensure a secure fit to prevent leaks.
- Fonctionnalité de test : Activate your vehicle's windshield washer system to check for proper spray pattern and coverage.
Image 5.1: Nozzle mounted on a wiper arm, showing the secure fit.
Image 5.2: Visual guide for attaching the nozzle and connecting the fluid tube.
6. Mode d'emploi
Once installed, the XUKEY 4-Way Windshield Washer Nozzles operate in conjunction with your vehicle's existing windshield washer system. The 4-way adjustable jets provide a wide spray pattern for effective cleaning.
- Jet Adjustment: The brass spray ports are designed to be adjustable. If the spray pattern requires fine-tuning, gently adjust the direction of the brass tips using a small, pointed tool (e.g., a pin or needle) to direct the water flow precisely onto the windshield.
- Activation : Activate the windshield washer function from your vehicle's control stalk or button as you normally would.
Image 6.1: The nozzle in operation, showing the effective spray pattern on the windshield.
7. Entretien
Regular maintenance ensures optimal performance of your washer nozzles.
- Nettoyage: Periodically inspect the nozzles for any debris or mineral deposits that may obstruct the spray. Use a fine pin or needle to clear any blockages in the spray ports.
- Vérification des niveaux de liquide : Assurez-vous que le réservoir de liquide lave-glace de votre véhicule est suffisamment rempli avec le liquide lave-glace approprié.
- Inspection des tuyaux : Check the washer fluid hose for any cracks, kinks, or loose connections that could affect fluid delivery.
8. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Pas de pulvérisation ou pulvérisation faible | Clogged nozzle, low washer fluid, kinked hose, loose connection | Clear nozzle with a pin, refill washer fluid, inspect and straighten hose, secure connections. |
| Incorrect spray pattern | Buse mal alignée | Gently adjust the brass spray tips using a fine tool. |
| Leakage at connection point | Raccord de tuyau desserré | Ensure the washer fluid tube is securely attached to the nozzle inlet. |
9. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Marque | XUKEY |
| Numéro de modèle | J90287X2 |
| Matériel | Copper, ABS |
| Poids de l'article | 0.317 once (par paire) |
| Dimensions du colis | 5.91 x 4.41 x 0.47 pouces |
| Type de connexion d'entrée | Push-Fit |
| Nombre de ports | 4 (per nozzle) |
| Compatibilité | Wiper arms 0.31–0.35 inches (8–9mm) |
Image 9.1 : Dimensions du produit à titre de référence.
10. Garantie et assistance
For any questions, technical assistance, or warranty inquiries regarding your XUKEY Universal 4-Way Windshield Washer Nozzles, please contact XUKEY customer support through the retailer where the product was purchased. Please retain your proof of purchase for warranty claims.