Hama 00118498

Hama 00118498 Monitor Desk Mount Instruction Manual

Modèle: 00118498

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Hama 00118498 Monitor Desk Mount. Designed to enhance your ergonomic workspace, this monitor arm allows for flexible positioning of your display, promoting a comfortable and productive environment. Please read these instructions carefully before beginning installation.

Instructions d'installation

Follow these steps to correctly install your Hama 00118498 Monitor Desk Mount.

1. Fixation du bureauamp

  1. Placer le bureau clamp assembly onto the edge of your desk. Ensure the desk surface is sturdy and can support the weight of the mount and your monitor.
  2. Serrez le clamp screw firmly until the mount is securely fastened to the desk. Do not overtighten.
Close-up of the Hama monitor arm desk clamp mécanisme

Image: The desk clamp mechanism, showing how it attaches to the desk edge for secure mounting.

2. Fixation du moniteur

  1. Ensure your monitor is VESA compatible (100x100mm or 75x75mm).
  2. Carefully attach the VESA plate from the monitor arm to the back of your monitor using the provided screws. Make sure the screws are tightened securely.
  3. Slide the monitor (with the attached VESA plate) onto the arm's mounting head. Ensure it clicks into place or is secured with any locking mechanism provided.
Hama monitor arm showing the VESA plate and adjustable joint

Image: The monitor arm's VESA plate and adjustable joint, ready for monitor attachment.

Côté view of the Hama monitor arm with cable management and VESA mount

Image : Un côté view of the assembled monitor arm, highlighting the VESA mount and integrated cable management channels.

3. Gestion des câbles

Utilize the integrated cable management system to route your monitor cables neatly along the arm. This helps maintain a tidy workspace and prevents cable clutter.

Mode d'emploi

The Hama 00118498 Monitor Desk Mount offers various adjustment options for optimal viewconfort.

  • Réglage de la hauteur : The integrated pneumatic spring allows for smooth and effortless vertical height adjustment. Gently push or pull the monitor to your desired height.
  • Pivot: The arm can swivel horizontally, allowing you to rotate your monitor to share your screen or change your viewangle de vue.
  • Inclinaison: Adjust the monitor's tilt angle (up or down) to reduce glare and find the most comfortable viewposition de départ.
  • Rotation: Rotate your monitor from landscape to portrait orientation as needed for different tasks.

Adjustments should be smooth. If the monitor does not hold its position, refer to the troubleshooting section for tension adjustments.

Entretien

Un entretien régulier garantit la longévité et les performances optimales de votre bras de moniteur.

  • Nettoyage: Wipe the surface of the monitor arm with a soft, damp tissu. Évitez d'utiliser des nettoyants ou des solvants abrasifs.
  • Vérifier les connexions : Vérifiez régulièrement toutes les vis et les fixations pour vous assurer qu'elles restent bien serrées et sécurisées. Resserrer si nécessaire.
  • Lubrification: The pneumatic spring is maintenance-free. Do not attempt to lubricate internal components.

Dépannage

If you encounter issues with your Hama 00118498 Monitor Desk Mount, refer to the following common problems and solutions:

  • L'écran s'affaisse ou ne maintient pas sa position : The tension of the pneumatic spring may need adjustment. Locate the tension adjustment screw (usually found on the arm joint) and turn it clockwise to increase tension for heavier monitors, or counter-clockwise for lighter monitors. Adjust gradually until the monitor holds its position.
  • L'écran est difficile à déplacer : If the arm is too stiff, the tension may be too high. Turn the tension adjustment screw counter-clockwise to decrease tension.
  • Arm Feels Loose on Desk: Assurez-vous que le bureau est clamp is fully tightened. If the desk surface is too thin or fragile, consider adding a protective pad between the clamp and the desk.
  • L'écran oscille : Check all mounting screws on the VESA plate and the arm joints to ensure they are securely fastened.

Caractéristiques

Fonctionnalité Détail
Numéro de modèle 00118498
Type de montage Bureau Clamp
Type de mouvement Rotating, Swivel, Tilt, Height Adjustable (Pneumatic Spring)
Marque Hama
Matériel Aluminium
Couleur Noir
Appareils compatibles Moniteur
Taille minimale compatible 10 pouces
Taille maximale compatible 32 pouces
Poids de l'article 2.2 kilogrammes
Pays d'origine Chine

Garantie et assistance

Pour obtenir des informations sur la garantie ou une assistance technique, veuillez consulter la documentation fournie avec votre achat ou visiter le site officiel de Hama. webSur ce site, vous trouverez généralement les coordonnées du service d'assistance, une FAQ et des ressources supplémentaires.

Hama officiel Website: www.hama.com

© 2023 Hama. Tous droits réservés.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.