SMARTRO Wireless Remote Sensor User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your SMARTRO Wireless Remote Sensor (Model SENSOR92). This sensor is designed to work with compatible SMARTRO indoor/outdoor thermometers, specifically models SC91 and SC62, to provide accurate temperature and humidity readings.

Important Note: This sensor is not compatible with SMARTRO models SC92, SC93, or SC31B.

Produit terminéview

Figure 1 : Devant view of the SMARTRO Wireless Remote Sensor, showing the digital display for temperature and humidity, channel indicator, and signal icon.

Figure 2 : Arrière view of the sensor with the battery cover removed, illustrating the battery compartment, °C/°F selection button, TX button, and 1 to 3 channel switch. Also visible is the wall-mounting hole.

The SMARTRO Wireless Remote Sensor (SENSOR92) is a compact, battery-powered device designed to transmit outdoor or indoor environmental data to a compatible main unit. It features a digital display showing current temperature (in °C or °F) and humidity (%RH). The sensor is equipped with a wall-mount hole and a table stand for versatile placement.

Configuration et installation

1. Installation de la batterie :

   • Open the battery compartment cover on the back of the sensor (refer to Figure 2).
   • Insert two (2) AA batteries, ensuring correct polarity (+ and -). Batteries are not included.
   • Fermez soigneusement le couvercle du compartiment à piles.

2. Sélection des chaînes :

   • Locate the 1 to 3 Channel Switch inside the battery compartment (refer to Figure 2).
   • Select a channel (1, 2, or 3) for the sensor. If you are using multiple sensors, ensure each sensor is set to a different channel.

3. Association avec l'unité principale :

   • Place the sensor within close proximity to your SMARTRO main unit (e.g., SC91 or SC62).
   • On the sensor, press the "TX" button (Transmit button) located inside the battery compartment (refer to Figure 2). This will send a signal to the main unit.
   • Follow the pairing instructions for your specific SMARTRO main unit to establish a connection. The main unit should display the sensor's readings.

4. Placement:

   • The sensor can be placed on a flat surface using its integrated stand or mounted on a wall using the wall-mount hole.
   • For outdoor use, choose a location that is protected from direct sunlight and heavy rain to ensure accuracy and longevity. The transmission range is up to 200ft/60m in an open area.
   

   Figure 3 : Example of outdoor sensor placement, demonstrating its wireless transmission capability to the main unit.

Mode d'emploi

• Sélection de l'unité de température (°C/°F) :

  • To switch between Celsius (°C) and Fahrenheit (°F), open the battery compartment cover.
  • Press the "°C/°F" selection button located inside the compartment (refer to Figure 2). The display will update accordingly.

• Affichage de lecture :

  • The sensor's digital display shows the current temperature and humidity readings.
  • These readings are also transmitted wirelessly to your paired SMARTRO main unit.

Entretien

• Remplacement de la batterie :

  • When the battery indicator on the sensor or main unit shows low power, replace both AA batteries promptly.
  • Ensure proper polarity during installation.

• Nettoyage:

  • Essuyez l'extérieur du capteur avec un chiffon doux et sec.amp tissu. N'utilisez pas de nettoyants abrasifs et ne plongez pas l'appareil dans l'eau.

• Protection de l'environnement :

  • Keep the sensor away from direct sunlight and heavy rain to prevent damage and ensure accurate readings.

Dépannage

Caractéristiques

• Modèle: CAPTEUR92
• Compatibilité: SMARTRO SC91, SC62 (Not compatible with SC92, SC93, SC31B)
• Source d'alimentation : 2 piles AA (non incluses)
• Portée de transmission : Jusqu'à 200 pieds / 60 m (espace ouvert)
• Chaînes : Canaux sélectionnables 3
• Affichage de la température: °C / °F sélectionnable
• Tolérance de température : +/- 5 ° F
• Tolérance à l'humidité : +/- 5% HR
• Matériel: Plastique
• Dimensions (environ) : 2.3 pouces (longueur)
• Poids (environ) : 2.46 onces
• Technologie de connectivité: RF
• Type d'affichage : Numérique
• Entretien du produit : Keep away from direct sunlight and rain.

Garantie et assistance

SMARTRO products are designed for reliability and performance. For warranty information or technical support, please contact SMARTRO customer service. Details can often be found on the official SMARTRO website ou via votre plateforme d'achat.

Fabricant: SMARTRO

E-mail: support@smartro.co

Please have your model number (SENSOR92) and purchase details ready when contacting support.