1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your JIAYIN JYPC-7A Solenoid Water Pump. Please read it thoroughly before installation and use to ensure proper function and longevity of the product. Retain this manual for future reference.
2. Consignes de sécurité
Respectez toujours les consignes de sécurité suivantes afin d'éviter les blessures ou d'endommager la pompe :
- Sécurité électrique : Assurez-vous que l'alimentation électrique corresponde au volume de la pompetage (AC 100-120V, 60Hz). Disconnect power before any installation, maintenance, or troubleshooting. All electrical connections should be performed by a qualified professional.
- Compatibilité liquide : This pump is designed for water or non-corrosive liquids only. Using corrosive liquids may damage the pump and void the warranty.
- Limites de température : Do not exceed the specified working temperatures: ambient temperature (Ta) 70℃ / 158℉ and medium temperature (Tf) 60℃ / 140℉.
- Installation: Securely mount the pump to prevent vibration and movement. Ensure proper ventilation.
- Équipement de protection individuelle : Wear appropriate personal protective equipment (e.g., safety glasses, gloves) during installation and maintenance.
3. Produit terminéview
The JIAYIN JYPC-7A is an electromagnetic solenoid water pump designed for various applications requiring precise liquid transfer. It features a robust plastic construction and operates on AC 100-120V power.
Figure 3.1 : Devant view of the JIAYIN JYPC-7A Solenoid Water Pump, showing the main body, inlet/outlet ports, and electrical connections.
Caractéristiques principales :
- No rust, no clogging design.
- Operates on AC 100-120V, 60Hz, 60W.
- Flow rate of 2400 ±10% cc/min.
- Suitable for water or non-corrosive liquids.
- Designed for intermittent duty (ID2/1min).
Figure 3.2 : Gros plan view of the product label on the JIAYIN JYPC-7A pump, displaying model number, voltage, power, frequency, and working mode.
4. Spécifications
Detailed technical specifications for the JIAYIN JYPC-7A Solenoid Water Pump:
| Spécification | Valeur |
|---|---|
| Marque | JIAYIN |
| Modèle | JYPC-7A |
| Taper | Water Solenoid Pump |
| Voltage | 100-120 V CA |
| Fréquence | 60 Hz |
| Pouvoir | 60 W |
| Débit | 2400 ±10% cc/min |
| Pression de travail | 0-2 bars |
| Mode de fonctionnement | ID2/1min (Intermittent Duty) |
| Milieu de travail | Water or non-corrosive liquid |
| Température ambiante (Ta) | Max 70℃ / 158℉ |
| Medium Temperature (Tf) | Max 60℃ / 140℉ |
| Matériel | Plastique |
| Poids net | 423g / 14.9oz (approx. 15 ounces) |
| Dimensions du produit | 4.53 x 1.93 x 1.18 pouces (115 x 49.6 x 30 mm) |
| Hauteur de levage maximale | 20 centimètres |
| Niveau sonore | 45 décibels |
| Longueur du cordon | 11.8 pouces |
Figure 4.1 : Surview of pump dimensions and performance characteristics including flow/pressure, flow/time, and temperature rise/time graphs.
5. Configuration et installation
Follow these steps for proper installation of the JYPC-7A pump:
- Montage: Securely mount the pump in a stable position. Refer to the dimensional drawings for mounting points and overall size.
- Connexions entrée/sortie : Connect the appropriate tubing to the pump's inlet and outlet ports. The flow direction is indicated on the pump's label (refer to Figure 3.2). For flow testing, a 17.7-inch silicon tube with an outer diameter of 0.4 inches and an inner diameter of 0.24 inches is typically connected to the water inlet port. Ensure all connections are tight to prevent leaks.
- Connexion électrique : Connect the pump to an AC 100-120V, 60Hz power source. Ensure the wiring is correct and secure. It is recommended to use appropriate connectors and insulate all exposed wires.
- Intégration du système : Integrate the pump into your system, ensuring that the liquid medium is non-corrosive and within the specified temperature limits.
Figure 5.1 : Detailed dimensional drawing of the JIAYIN JYPC-7A pump, showing measurements for installation planning.
6. Fonctionnement
Once installed, the JIAYIN JYPC-7A pump operates by converting electrical energy into mechanical energy to move liquid. The pump is designed for intermittent duty (ID2/1min), meaning it should operate for a maximum of 2 minutes followed by a minimum of 1 minute rest to prevent overheating and ensure optimal performance and lifespan.
- Mise sous tension : Apply power to the pump. The pump will begin to draw and transfer liquid.
- Surveillance: Observe the flow rate and pressure to ensure it meets your application requirements.
- Cycle de service : Adhere strictly to the ID2/1min duty cycle. Continuous operation beyond recommended limits can lead to premature failure.
- Niveau de liquide : Ensure the liquid source does not run dry, as dry running can damage the pump. The pump is capable of drawing water from a height of 20cm within 10 seconds.
7. Entretien
The JIAYIN JYPC-7A pump is designed for low maintenance, featuring materials that resist rust and clogging. However, regular checks can help ensure its continued reliable operation:
- Inspection régulière : Periodically inspect the pump and connections for any signs of wear, leaks, or damage.
- Propreté: Ensure the pump and surrounding area are kept clean and free from debris that could obstruct airflow or clog the inlet/outlet.
- Liquid Quality: Always use clean, non-corrosive liquids to prevent internal damage and maintain performance.
- Stockage: If storing the pump for an extended period, ensure it is drained of liquid and stored in a dry, temperate environment.
8. Dépannage
If you encounter issues with your JIAYIN JYPC-7A pump, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| La pompe ne démarre pas | Pas d'alimentation électrique Câblage incorrect Défaut interne | Vérifiez le raccordement électrique et le disjoncteur. Vérifiez le câblage par rapport au schéma. Contact support if wiring is correct |
| Débit faible ou nul | Clogged inlet/outlet Air dans le système Insufficient liquid source Damaged impeller/valve | Inspecter et éliminer tout blocage Purger l'air du système Ensure adequate liquid supply Contacter le support |
| Bruit/vibrations excessifs | Montage lâche Air dans le système Obstruction interne | Serrez les vis de montage Purger l'air du système Inspect for foreign objects (disconnect power first) |
| Surchauffe de la pompe | Dépassement du cycle de service High ambient/medium temperature Mauvaise ventilation | Adhere to ID2/1min duty cycle Ensure operating within specified temperature limits Improve ventilation around the pump |
Si le problème persiste après avoir essayé ces solutions, veuillez contacter le service client.
9. Garantie et assistance
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your purchase receipt as proof of purchase. When contacting support, please have your product model (JYPC-7A) and purchase date available.