Introduction
Thank you for choosing the Rolanstar 39-inch Computer Desk. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and efficient use of your new desk. Please read this manual thoroughly before assembly and retain it for future reference.
Consignes de sécurité
- Assemblez toujours le bureau sur une surface douce et propre afin d'éviter les rayures.
- Avant utilisation, assurez-vous que toutes les vis et fixations sont bien serrées. Vérifiez-les périodiquement et resserrez-les au besoin.
- Ne surchargez pas le bureau ou les tiroirs au-delà de leur capacité de poids indiquée.
- Keep liquids away from the integrated power outlet to prevent electrical hazards.
- Ne laissez pas les enfants grimper sur le bureau ou jouer avec.
- Use the desk on a level surface to prevent tipping. Adjustable feet are provided for stability on uneven floors.
Contenu du colis
Avant de commencer l'assemblage, veuillez vérifier que tous les composants énumérés ci-dessous sont présents et non endommagés.
- Computer Desk components (particle board panels, metal frame parts)
- Integrated Power Outlet (2 AC outlets, 2 USB ports)
- Support de moniteur
- 2 tiroirs
- Accessory Bag (screws, bolts, L-shaped Allen wrench)
- Table Corner Protectors
- Colliers de serrage
- Manuel d'instructions
- 4 Adjustable Feet Pads
Configuration et assemblage
Assembly typically takes approximately 30 minutes with one person. Follow the numbered steps in the included instruction manual. Ensure all parts are correctly oriented before tightening screws.
Étape 1 : Assembler le cadre métallique
Connect the metal frame components using the provided screws and the L-shaped Allen wrench. Do not fully tighten screws until all parts are loosely assembled.
Image : Terminéview of the Rolanstar Computer Desk, showing the rustic brown wooden top and black metal frame.
Step 2: Attach the Desktop and Drawers
Secure the main desktop panel to the assembled metal frame. Install the drawer slides and then insert the two pull-out drawers. Ensure drawers slide smoothly.
Image: Close-up of the desk showing the two drawers open, highlighting their storage capacity for notebooks and paperwork.
Step 3: Install the Monitor Stand and Power Outlet
Attach the monitor stand to the designated area on the desktop. The integrated power outlet is pre-installed within the monitor stand. Route the power cord as needed.
Image: Detail of the monitor stand with the built-in power outlet, featuring two AC outlets and two USB ports.
Image: Diagram showing the overall dimensions of the desk and two possible installation modes for the monitor stand, allowing for different widths.
Étape 4 : Réglages finaux
Once all components are assembled, fully tighten all screws. Attach the adjustable feet pads to the bottom of the desk legs and adjust them to level the desk on uneven floors. Use the provided cable ties to manage power cords for a tidy workspace.
Image: Detail of an adjustable foot pad, demonstrating its function for leveling the desk.
Mode d'emploi
Utilisation de la prise de courant
The desk features a built-in power strip with 2 standard AC outlets (120V/12A) and 2 USB ports (5V/2A). Plug the desk's main power cord into a wall outlet. You can then plug your devices directly into the integrated outlets for convenient power access.
Image: The desk's power cord, approximately 6.5 feet long, shown extending from the integrated power outlet on the monitor stand.
Utilizing the Monitor Stand
The monitor stand is designed to elevate your monitor, promoting an ergonomic sitting posture and reducing neck strain. It also provides additional storage space underneath for small items or a keyboard when not in use.
Image: An illustration demonstrating the ergonomic benefits of using the monitor stand to achieve a correct sitting posture.
Utilisation des tiroirs
The two pull-out drawers offer hidden storage for documents, office supplies, or personal items, helping to keep your desktop clear and organized.
Entretien
- Nettoyage: The desk surface is made of melamine veneer, which is waterproof and dust-free. Wipe clean with a damp chiffon. Évitez les produits chimiques agressifs ou les nettoyants abrasifs.
- Inspection: Vérifiez régulièrement le serrage de toutes les vis et fixations. Resserrer si nécessaire.
- Protection: Use the provided table corner protectors to prevent damage to the desk and injuries.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Le bureau est bancal. | Sol inégal ou fixations desserrées. | Ajustez les patins pour mettre le bureau à niveau. Vérifiez et serrez toutes les vis de montage. |
| Les tiroirs ne coulissent pas facilement. | Installation incorrecte des glissières de tiroir ou obstruction. | Ensure drawer slides are correctly aligned and installed. Check for any obstructions in the tracks. |
| La prise de courant ne fonctionne pas. | Desk power cord not plugged in, or circuit breaker tripped. | Verify the desk's power cord is securely plugged into a functional wall outlet. Check your home's circuit breaker. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Marque | Rolanstar |
| Numéro de modèle | CPT014-RR |
| Dimensions du produit (P x L x H) | 19.7"P x 39.4"L x 34.2"H |
| Matériel | Engineered Wood (Melamine finish), Metal Frame |
| Couleur | Brun rustique |
| Nombre de tiroirs | 2 |
| Prise de courant | 2 prises secteur (120 V/12 A), 2 ports USB (5 V/2 A) |
| Longueur du cordon d'alimentation | 6.5 pieds (environ) |
| Caractéristiques spéciales | Ergonomic Monitor Stand, Adjustable Feet, Cable Management |
| Temps d'assemblage (approximatif) | 30 minutes (1 person) |
Garantie et assistance
For warranty information, technical support, or to order replacement parts, please contact Rolanstar customer service through the retailer where the product was purchased or visit the official Rolanstar website. Please have your model number (CPT014-RR) and purchase date available when contacting support.
Rolanstar Official Store: Visit the Rolanstar Store on Amazon