1. Instructions de configuration
This section provides guidance for the initial assembly and setup of your VOUNOT Shanghai Cantilever Umbrella.
1.1 Déballage et vérification des composants
Déballez soigneusement tous les composants. Assurez-vous que toutes les pièces sont présentes et non endommagées avant de procéder à l'assemblage.
1.2 Assemblage de base
The umbrella features an iron pole with a powder coating and a stable cross-shaped base. It is essential to secure the cross base to the main pole. This process typically takes about 10 minutes.
- Attach the cross base to the bottom of the main pole.
- Assurez-vous que toutes les connexions sont bien serrées.
- Remarque importante : A suitable umbrella base (e.g., weighted base or patio pavers) is required to stabilize the cross base. This additional base is not supplied and must be purchased separately to prevent the umbrella from tipping over.
1.3 Attaching the Umbrella Canopy
Once the pole and base are secure, attach the umbrella canopy structure to the designated points on the pole. Follow the specific instructions provided in your product packaging for precise attachment details.

Figure 1 : Gros plan views of the umbrella's adjustment mechanisms, including the crank for opening/closing, the tilt lever, and height adjustment knobs.
2. Mode d'emploi
Learn how to effectively use your VOUNOT Shanghai Cantilever Umbrella to maximize shade and comfort.
2.1 Opening the Umbrella
To open the umbrella, locate the crank handle on the main pole. Turn the crank handle clockwise until the canopy is fully extended and taut. Do not force the crank once the umbrella is fully open.
2.2 Réglage de l'angle d'inclinaison
The umbrella features a vertical tilting system. To adjust the angle, locate the tilt lever or button on the pole. Engage the mechanism and adjust the canopy to your desired angle for optimal shade. Release the lever/button to lock the position.
2.3 Rotating the Umbrella
Some models allow for 360-degree rotation. If your model has this feature, loosen the rotation knob(s) at the base of the main pole, rotate the umbrella to the desired position, and then tighten the knob(s) to secure it.
2.4 Closing the Umbrella
To close the umbrella, turn the crank handle counter-clockwise until the canopy is fully retracted. Ensure the canopy is neatly folded to prevent damage.

Figure 2: Visual guide to operating the umbrella's tilt, closing, rotation, and height adjustment features.
3. Entretien
Proper maintenance ensures the longevity and optimal performance of your umbrella.
3.1 Entretien général
- Always close the umbrella when not in use, especially during windy conditions or heavy rain, to prevent damage.
- Avoid closing the umbrella forcefully.
3.2 Cleaning the Canopy
The canopy is made of 180 g/m² polyester fabric. To clean, gently wipe with a damp cloth. For stubborn stains, use a mild soap solution and rinse thoroughly with water. Allow the canopy to air dry completely before closing or storing.
3.3 Stockage
When not in use for extended periods, or during adverse weather, close the umbrella and use the provided protective cover. This will shield the canopy from dust, dirt, and UV degradation, prolonging its lifespan.

Figure 3: The umbrella closed and protected with its cover for storage.
4. Dépannage
This section addresses common issues you might encounter with your umbrella.
4.1 Umbrella Not Opening/Closing Smoothly
- Check for any obstructions in the canopy or mechanism.
- Ensure the crank handle is properly engaged and not stripped.
- Lightly lubricate moving parts if resistance is felt (use a silicone-based lubricant).
4.2 Umbrella Instability
- Verify that the cross base is properly secured to the main pole.
- Confirm that an appropriate weighted umbrella base (not supplied) is in use and adequately filled/weighted.
- Veillez à ce que le parapluie soit fermé en cas de vents forts.
If you encounter issues not covered here, please refer to the 'Warranty & Support' section for assistance.
5. Spécifications
Detailed technical specifications for the VOUNOT 300 cm Shanghai Cantilever Umbrella.
| Marque | VOUNOT |
| Nom du modèle | Shanghai |
| Nom du type de produit | 300 cm Shanghai Umbrella |
| Couleur | Rouge |
| Cover Diameter | 300 Centimeters (3 m) |
| Hauteur | 257 cm |
| Diamètre du poteau | 48 mm |
| Poids de l'article | 13 kilogrammes |
| Matériau (Canopée) | Polyester (180 g/m²) |
| Matériau du poteau | Acier inoxydable |
| Matériau du cadre | Aluminium |
| Matériau de la poignée | Aluminum, Steel Alloy |
| Mécanisme d'ouverture | Crank Opening |
| Mécanisme d'inclinaison du parapluie | Inclinaison manuelle |
| Caractéristiques spéciales | Résistant aux UV |
| Composants inclus | Housse de protection |

Figure 4: Key dimensions of the VOUNOT Shanghai Cantilever Umbrella.
6. Garantie et assistance
6.1 Informations sur la garantie
Ce produit est livré avec un 1-year EU spare parts availability duration. This indicates that spare parts will be available for a period of one year from the date of purchase within the European Union. Please retain your proof of purchase for any warranty claims.
6.2 Assistance clientèle
For any questions, concerns, or assistance with your VOUNOT Shanghai Cantilever Umbrella, please contact the manufacturer's customer service. Refer to your purchase documentation or the VOUNOT brand store on Amazon for contact details.
When contacting support, please provide your product model (Shanghai) and any relevant purchase information to expedite assistance.