Shell SEV-40-01

SHELL Electric Vehicle Charger User Manual

Model: SEV-40-01

1. Introduction

Thank you for choosing the SHELL Electric Vehicle Charger. This Level 2 (40 Amps, 240V) EV charger is designed to provide fast and efficient charging for your electric vehicle, up to 7 times faster than a standard wall outlet (Level 1). This manual provides essential information for the safe and effective use of your new EV charger, including setup, operation, maintenance, and troubleshooting.

SHELL Level 2 40 Amp EV Charger with 30ft cable and protective case

Figure 1: SHELL Level 2 40 Amp EV Charger with 30ft cable and protective case.

2. Consignes de sécurité

Your safety is paramount. Please read and understand all safety instructions before operating the charger. For detailed safety guidelines, refer to the official Safety Information PDF document provided with your product or available online.

  • Ensure the charger is connected to a properly grounded NEMA 14-50R receptacle.
  • N’utilisez pas le chargeur si le câble ou le connecteur est endommagé.
  • Gardez les enfants et les animaux domestiques éloignés de la zone de charge.
  • The charger is rated IP66 for water and dust resistance, suitable for indoor and outdoor use. However, avoid submerging the unit in water.
  • The charger features S-PROTECH technology for smart and safe charging, including protection against short-circuit, current leakage, grounding, thermal, over-charge, and over-current.
SHELL EV Charger being splashed with water, demonstrating IP66 waterproof rating

Figure 2: The charger is designed for safe use in various weather conditions, including rain and snow, with an IP66 waterproof rating.

3. Contenu de la boîte

Upon opening your SHELL EV Charger package, you should find the following components:

  • SHELL Portable Electric Vehicle Charger (Level 2) with 30ft cable and SAE J1772 connector
  • NEMA 14-50R Plug (integrated with the charger cable)
  • NEMA 5-15P (110V) to 14-50R Adapter
  • Tailored Protective Case
  • Guide de l'utilisateur (ce manuel)
Icon representing user guide Icon representing portable case Adaptateur NEMA 5-15P vers 14-50R SHELL EV Charger

Figure 3: Components included in the SHELL EV Charger package.

4. Installation

The SHELL EV Charger is designed for easy plug-and-charge operation with no complex installation required. It can be used for both home and portable charging.

4.1 Connexion d'alimentation

  1. Pour la recharge de niveau 2 (240 V) : Plug the NEMA 14-50R plug directly into a dedicated 240V NEMA 14-50R receptacle. Ensure the receptacle is properly installed and grounded by a qualified electrician.
  2. Pour la recharge de niveau 1 (110 V) : Use the included NEMA 5-15P to 14-50R adapter. Connect the charger's NEMA 14-50R plug to the adapter, then plug the adapter into a standard 110V residential outlet (NEMA 5-15). Note that charging speed will be significantly slower at 110V.
Image showing NEMA 5-15 120V outlet and NEMA 14-50 receptacle with adapter

Figure 4: The charger is compatible with both 240V NEMA 14-50R outlets and 110V NEMA 5-15 outlets using the provided adapter.

4.2 Placement

The charger's 30ft cable provides flexibility for placement. Position the charger unit in a location that is easily accessible and allows the cable to reach your vehicle's charging port without excessive tension or kinking. The unit can be wall-mounted if desired, but it is also designed for portable use with its protective case.

Woman placing the portable EV charger case into a car trunk

Figure 5: The portable EVA protection case allows for convenient transport and charging on-the-go.

5. Mode d'emploi

5.1 Connexion à votre véhicule

The SHELL EV Charger is compatible with all electric vehicles and plug-in hybrids that use the SAE J1772 connector. For Tesla vehicles, an additional J1772-to-Tesla adapter (not included) is required.

  1. Ensure the charger is properly plugged into a power outlet (240V or 110V).
  2. Ouvrez le port de chargement de votre véhicule.
  3. Firmly insert the SAE J1772 charging gun into your vehicle's charging port until it clicks into place.
  4. The charger will automatically begin charging, and the LCD display will show the charging status.
Hand connecting the SHELL EV charger to an electric vehicle's charging port

Figure 6: The charger is 100% compatible with all electric vehicles using the SAE J1772 standard.

5.2 Comprendre l'écran LCD

The charger features an LCD display that provides real-time charging information, including:

  • Vol d'entréetage (v)
  • Actuel (Amps)
  • Puissance (kW)
  • Energy Charged (kWh)
  • Temps de charge
  • Température interne
Close-up of the SHELL EV charger's LCD display showing charging status

Figure 7: The LCD display provides comprehensive charging status at a glance.

5.3 Adjusting Charging Current (Smart vs. Manual Mode)

The charger allows you to adjust the charging current to optimize charging speed or battery life. This adjustment should be made avant connecting the charger to your vehicle.

  • Auto Mode (Smart Mode): This is the default setting. The charger will automatically maximize the output current (up to 40A) to shorten charging time.
  • Mode manuel : Press the 'A' button on the charger unit to cycle through available current settings (e.g., 12A, 16A, 24A, 32A, 40A). Select a customized constant current for longer charging time, which can contribute to better battery life.

5.4 Scheduling Charging

You can schedule the start or finish time of your charging session to take advantage des tarifs d'électricité en heures creuses.

  • Press the 'Clock' button on the charger unit to set a delay in charge start time (increments of whole hours).
  • The charger will automatically cut off power when the vehicle battery is fully charged.
SHELL EV charger connected to a car, with a clock icon indicating scheduling feature

Figure 8: Utilize the scheduling feature to charge your EV during off-peak hours, saving on electricity costs.

6. Entretien

Proper maintenance ensures the longevity and safe operation of your SHELL EV Charger.

  • Nettoyage: Essuyez le chargeur et les câbles avec un chiffon doux et sec.amp Utilisez un chiffon. N’utilisez pas de produits chimiques agressifs ni de nettoyants abrasifs. Assurez-vous que l’appareil est débranché avant de le nettoyer.
  • Stockage: When not in use, store the charger in its tailored protective case in a dry, cool place. Avoid coiling the cable too tightly to prevent damage.
  • Inspection: Regularly inspect the charging cable, plug, and charging gun for any signs of wear, cuts, or damage. If any damage is found, discontinue use immediately and contact customer support.
  • Protection de l'environnement : The charger is IP66 rated, meaning it is 'dust tight' and protected against powerful jets of water. It is suitable for both indoor and outdoor use.

7. Dépannage

If you encounter issues with your SHELL EV Charger, refer to the following common problems and solutions:

Problème Cause possible Solution
Chargeur ne démarre pas/pas d'alimentation. Mauvaise connexion ; problème de prise électrique ; défaut interne. Ensure the NEMA 14-50R plug (or 110V adapter) is fully inserted into the outlet. Check the circuit breaker. If the issue persists, contact support.
Charging fault/error message on vehicle. Improper connection to vehicle; vehicle compatibility issue; charger fault. Ensure the J1772 connector is fully and securely inserted into the vehicle's port. For Tesla, confirm the J1772-to-Tesla adapter is correctly used. Try unplugging and re-plugging the charger from both the wall and the car. If the issue persists, contact support.
Charging slower than expected. Using 110V outlet; current setting is too low; vehicle's charging limit. Ensure you are using a 240V NEMA 14-50R outlet for maximum speed. Check the current setting on the charger and adjust to a higher amperage if safe and desired (before connecting to vehicle). Note that some vehicles may limit charging speed.
Charger unit feels warm. Normal operation; high ambient temperature; prolonged high-current charging. It is normal for the charger to generate some heat during operation. The S-PROTECH technology includes thermal protection. If it feels excessively hot or an overheating warning appears, disconnect immediately and allow it to cool. Ensure adequate ventilation around the unit.

8. Spécifications

Fonctionnalité Détail
Numéro de modèle SEV-40-01
Vol d'entréetage 240 Volts (compatible with 110V via adapter)
Amprage 40 Amps (réglable)
Type de connecteur Norme SAE J1772
Longueur du câble 30 pieds (9.1 m)
Indice de protection IP (Ingress Protection) IP66 (dust tight, protected against powerful water jets)
Poids de l'article 20.6 livre (environ 9.34 kg)
Dimensions du colis 20 x 16.5 x 5.5 pouces
Caractéristiques spéciales Fast Charging, Portable, Waterproof, Adjustable Current, Schedule Timer, S-PROTECH Safety Technology

9. Garantie et assistance

SHELL is committed to providing high-quality products and excellent customer service.

  • Garantie: Please refer to the product packaging or official SHELL webConsultez le site pour connaître les conditions générales de garantie spécifiques.
  • Retours et remplacements : SHELL offers hassle-free replacement and return services.
  • Service client: For any questions, technical support, or warranty claims, please contact our customer service hotline.

Customer Service Hotline: Mon - Fri, 9AM - 5PM EST

Représentant du service à la clientèle avec un casque audio souriant

Figure 9 : Notre équipe d'assistance clientèle dédiée est prête à vous aider.

© 2023 Shell. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.