1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your DALY Smart BMS 16S 48V 30A LifePO4 PCB Protection Board. This Battery Management System (BMS) is designed to protect 16-cell, 48-volt Lithium Iron Phosphate (LifePO4) battery packs, ensuring their safety and extending their lifespan. It includes features such as overcurrent, overcharge, overdischarge, short circuit, and temperature protection, along with a wireless Bluetooth module for monitoring and parameter modification.
Figure 1 : Face avant view of the DALY Smart BMS 16S 48V 30A LifePO4 Protection Board.
2. Principales caractéristiques
- Protection complète : Includes overcurrent, overcharge, overdischarge, short circuit, and temperature protection to safeguard your battery pack.
- Surveillance intelligente : Wireless Bluetooth module allows real-time monitoring of battery status and modification of parameters via a smartphone application or PC software.
- Conception robuste : Features double protection through injection patent technology and a patent shell, offering waterproof, dustproof, shockproof, and anti-static properties.
- Haute précision : Utilizes high-quality components for precise acquisition of battery data.
- Installation facile : Designed for straightforward integration into your battery system.
Figure 2: DALY Smart BMS connected to a smartphone application for real-time data display.
3. Contenu du colis
Lors du déballage, veuillez vérifier que tous les éléments énumérés ci-dessous sont présents :
- 3.2V LifePO4 BMS (1 unit)
- Bluetooth Module (1 unit)
- NTC Sensor (1 unit)
- Sampling Cable (1 unit)
- UART Cable (1 unit)
- Manuel d'instructions (1 unité)
4. Configuration et installation
Proper installation is crucial for the safe and effective operation of the BMS. Please follow these steps carefully.
4.1 Outils requis
- Soldering machine (suggested temperature: 662°F / 350°C)
- Ciseaux
- Ruban adhésif double face
- Tin wire
- Multimètre
4.2 Instructions de câblage
Note: Always disconnect balance wires and the BMS connection port before welding black and red balance wires on the battery pack. Ensure the BMS cooling surface remains uncovered.
- After assembling your LifePO4 battery pack, mark battery B-, B1, B2,..., until the last red wire reaches battery pack B+.
- Connect balance wires to the BMS connection port. Use a multimeter in ohm detection function and turn on the buzzer. Connect the multimeter's black test pen to BMS P- and the red test pen to BMS B-. A beep sound indicates the BMS circuit connection is correct.
- Use a DC voltage function multimeter to measure the battery pack's voltage (between Battery B- and Battery B+) and through the BMS output voltage (between BMS B- and Battery P+). If these voltages are the same, the BMS can work normally.
Figure 3: Detailed wiring diagram for connecting the DALY Smart BMS to a 16S LifePO4 battery pack.
Figure 4: Physical dimensions of the DALY Smart BMS 16S 48V 30A.
5. Fonctionnement
The DALY Smart BMS offers advanced monitoring and control capabilities through its integrated Bluetooth module and compatible software.
5.1 Bluetooth App / PC Software
Utilize the dedicated Bluetooth application (for smartphones) or PC software to:
- Monitor real-time battery parameters such as voltage, courant, température et état de charge (SOC).
- View fault alarms and protection status.
- Modify various BMS parameters to optimize performance for specific applications.
Figure 5 : Example of DALY Smart BMS integration with a battery system and remote monitoring via a smartphone application.
Video 1: Demonstration of DALY Smart BMS features and functionality, including app connectivity and data display.
6. Spécifications
6.1 Spécifications générales
| Attribut | Valeur |
|---|---|
| Marque | QUOTIDIEN |
| Modèle | 16S 48V 30A (Smart BMS+RS485+CAN) |
| Vol d'entréetage | 48 volts |
| Poids de l'article | 300 g |
| Dimensions (L x l x H) | 5.03 x 2.6 x 0.51 pouces (128 x 66 x 18 mm) |
| Fabricant | Dongguan Daly Electronics Co., Ltd |
6.2 Electrical Parameters (LifePO4 16S Smart BMS)
Figure 6: Detailed electrical parameters for DALY Smart BMS LifePO4 16S models.
Refer to Figure 6 for detailed electrical parameters including discharge current, charge current, overcharge protection, overdischarge protection, balance voltage, short circuit protection, and temperature protection ranges. Note that the 30A model's specific values are listed within the table.
7. Dépannage
This section addresses common issues you might encounter with your DALY Smart BMS.
7.1 BMS Shutting Off
If the BMS frequently disconnects the battery from the bus or shuts off unexpectedly, consider the following:
- Vérification du câblage : Re-verify all wiring connections, especially the balance leads and main power connections, for secure and correct placement. Loose connections can cause intermittent operation.
- Paramètres des paramètres: Ensure that the protection parameters (e.g., overcurrent, undervoltage) configured in the Bluetooth app or PC software are appropriate for your battery pack and load. Incorrect settings can trigger premature protection.
- Courant de charge: Confirm that the continuous discharge current of your application does not exceed the BMS's rated 30A capacity. Sustained overcurrent will activate protection.
- Température: Check the operating temperature of the BMS. Excessive heat can trigger thermal protection. Ensure adequate ventilation around the BMS.
- Déséquilibre cellulaire : Vol significatiftage differences between individual cells can cause the BMS to trigger balance or protection functions. Monitor cell voltages via the app.
If the issue persists after checking these points, contact customer support for further assistance.
8. Entretien
To ensure the longevity and optimal performance of your DALY Smart BMS:
- Inspection régulière : Inspectez régulièrement tous les câblages et connexions afin de détecter tout signe d'usure, de corrosion ou de desserrage.
- Propreté: Keep the BMS free from dust and debris. While the unit is dustproof, a clean environment helps maintain optimal thermal performance.
- Mises à jour logicielles : Check for any available firmware or software updates for the Bluetooth app or PC software to ensure you have the latest features and bug fixes.
- Conditions environnementales : Utilisez le système de gestion technique du bâtiment (GTB) dans ses plages de température et d'humidité spécifiées afin d'éviter tout dommage.
Figure 7 : Vue éclatée view illustrating the internal structure and components of the DALY BMS, highlighting its robust design.
9. Applications
The DALY Smart BMS is suitable for a wide range of applications requiring reliable battery management for 16S 48V LifePO4 battery packs.
Figure 8 : Examples of diverse applications for DALY BMS products.
10. Garantie et assistance
DALY provides comprehensive customer support for its products.
- Service client: 24-hour one-on-one customer service is available for inquiries and assistance.
- Support technique : Lifetime technical support is offered for all DALY BMS products.
- Accessoires: If you require additional accessories such as an active balancer or parallel module, please contact customer service.