SECULINK 16-Channel 4K NVR (NVR1116PF-4K) User Manual

Introduction

This manual provides detailed instructions for the installation, setup, and operation of your SECULINK 16-Channel 4K Network Video Recorder (NVR). This NVR supports up to 16 IP cameras with resolutions up to 8MP (4K) and utilizes H.265+ compression for efficient storage. It features motion detection recording, multiple storage options, and remote access capabilities via a mobile application.

Contenu du colis

Veuillez vérifier que tous les articles listés ci-dessous sont inclus dans votre colis. Si un article est manquant ou endommagé, veuillez contacter le service client.

• 1x SECULINK 16-Channel Network Video Recorder
• 1x Adaptateur secteur
• 1x souris USB

Note: A hard drive is not included and must be purchased separately. SECULINK recommends Seagate 3.5" SATA HDDs up to 6TB for optimal performance.

Caractéristiques du produit

• Ultra HD Video: Supports full 4K (8MP) video viewing and recording on all 16 channels, compatible with 8MP/5MP/4MP/3MP/1080p ONVIF IP cameras.
• Compression H.265+ : Advanced video compression technology to enhance bandwidth and storage efficiency, resulting in smaller file sizes, higher definition, and longer recording times.
• Enregistrement de détection de mouvement : Configurable recording schedule based on detected movements, conserving storage space by recording only when activity is present.
• Plusieurs options de stockage : Supports up to 6TB SATA HDD (sold separately) and Cloud Storage Service (subscription may be required). Backup options include USB flash disk, USB DVR writer, and network.
• P2P Remote Access: Cloud P2P function enables remote viewing on smartphones, tablets, and PCs via the dedicated mobile application.

Image: Visual comparison demonstrating various video resolutions supported by the NVR, from 720p up to Ultra HD 4K (8MP).

Image: A diagram showing the storage efficiency of H.265+ compression, indicating significantly reduced file sizes compared to H.264 for the same video quality.

Installation

The NVR requires a wired Ethernet connection to your router for operation. Ensure your IP cameras are also connected to the same network.

1. Connectez le NVR : Connectez le NVR à votre routeur à l'aide d'un câble Ethernet.
2. Connecter l'écran : Connect a TV or monitor to the NVR using either the VGA or HDMI port.
3. Connecter une souris USB : Branchez la souris USB fournie sur l'un des ports USB du NVR.
4. Mise sous tension : Branchez l'adaptateur secteur au NVR, puis à une prise de courant. Le NVR s'allumera automatiquement.
5. Configuration initiale : Follow the on-screen prompts to complete the initial setup, including setting up network parameters and searching for connected IP cameras.

Image : Arrière view of the NVR, highlighting the VGA, HDMI, RJ45 (Ethernet), USB, and DC 12V power ports for connecting peripherals and network.

Image: A typical network setup illustrating how IP cameras connect to a router, which then connects to the NVR for recording and monitoring.

Installation du disque dur

A hard drive is required for local video storage. Follow these steps to install a 3.5" SATA HDD (not included).

1. Dévissez le couvercle : Power off the NVR and disconnect all cables. Carefully twist down the screws on the NVR casing to remove the top cover.
2. Connect HDD Cables: Connect the SATA data and power cables from the NVR to the corresponding ports on your hard drive.
3. Sécurisez le disque dur : Place the hard drive inside the NVR chassis and secure it using the provided screws.
4. Remplacer le couvercle : Reattach the NVR cover and secure it with the screws.
5. Formater le disque dur : After powering on the NVR, navigate to the storage settings in the NVR menu and format the newly installed hard drive. This prepares it for recording.

Image: Visual instructions detailing the process of installing a hard disk drive (HDD) into the NVR unit.

Mode d'emploi

Modes d'enregistrement

The NVR supports various recording modes to suit your surveillance needs:

• Enregistrement manuel : Démarrer et arrêter l'enregistrement manuellement.
• Enregistrement de détection de mouvement : The NVR records only when motion is detected by the connected cameras. This saves storage space and makes reviewc'est foutage more efficient.
• Enregistrement programmé : Définir des plages horaires spécifiques pour l'enregistrement continu.
• Enregistrement d'alarme : Records when an alarm event is triggered (e.g., sensor input, if supported by cameras).

Image: Illustration of different recording modes: 24/7 continuous, motion-triggered, and scheduled recording.

Détection de mouvement et alertes

Configure motion detection zones and sensitivity through the NVR's interface. When motion is detected, the NVR can trigger recording and send instant alert messages to your mobile devices via the XMeye app.

Image: A visual representation of smart motion detection, showing an alert message pushed to a mobile device when motion is detected by a camera.

Remote Access & Mobile App

Access your NVR and view foo en direct ou enregistrétage from anywhere using the free XMeye mobile application.

1. Téléchargez l'application : Rechercher "XMeye" or "XMeye Pro" in your device's app store (Google Play for Android, App Store for iOS) or scan the QR code provided in the app section.
2. Créer un compte : Create a new user account within the XMeye app.
3. Ajouter un appareil : Add your NVR to the app by scanning the NVR's QR code (usually found in the NVR's system information menu) or by manually entering its serial number.
4. View Footage: Une fois ajouté, vous pouvez view live camera feeds, playback recorded video, and receive motion alerts directly on your mobile device or PC.

Image : Terminéview of the XMeye Pro mobile application, demonstrating remote viewing capabilities across multiple devices like smartphones, tablets, and PCs.

Download the XMeye app: http://d.xmeye.net/Xmeye

Caractéristiques

Dépannage

• Aucune sortie vidéo :
  • Assurez-vous que l'enregistreur vidéo réseau (NVR) est allumé et que l'adaptateur secteur est correctement branché.
  • Verify that the VGA or HDMI cable is properly connected to both the NVR and the monitor/TV.
  • Check the input source on your monitor/TV to ensure it matches the NVR's connection (VGA or HDMI).
• Caméras non affichées :
  • Confirm that all IP cameras are powered on and properly connected to your network.
  • Assurez-vous que l'enregistreur vidéo réseau (NVR) est connecté au même réseau que vos caméras IP.
  • Check the NVR's camera management settings to ensure cameras are added and configured correctly. Verify IP addresses and login credentials for each camera.
  • Confirm cameras are ONVIF compliant if not from the same brand.
• Aucun enregistrement sur le disque dur :
  • Ensure a hard drive is installed and properly connected inside the NVR.
  • Verify that the hard drive has been formatted through the NVR's storage settings.
  • Check the recording schedule and motion detection settings to ensure they are configured to record.
  • Confirm the hard drive is not full. If it is, enable overwrite mode or replace the drive.
• Remote Access Issues (XMeye App):
  • Ensure the NVR has an active internet connection.
  • Verify that the XMeye app is updated to the latest version.
  • Double-check the NVR's serial number or QR code when adding the device to the app.
  • Assurez-vous que votre appareil mobile dispose d'une connexion internet stable.

Garantie et assistance

For warranty information, technical support, or further assistance, please refer to the contact information provided with your purchase or visit the official SECULINK webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.