Rexel Optimum AutoFeed 750M Automatic Micro-Cut Shredder

Introduction

Thank you for choosing the Rexel Optimum AutoFeed 750M Automatic Micro-Cut Shredder. This document provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new shredder. Please read this manual thoroughly before use and retain it for future reference.

The Rexel Optimum AutoFeed 750M is designed for high-volume office use, offering advanced features for secure document destruction:

• Alimentation automatique : Processes up to 750 sheets of A4 paper (80 g/m²) automatically.
• Alimentation manuelle: Accommodates up to 15 sheets (80 g/m²) for quick shredding.
• Micro-Cut Security: Shreds documents into 2x15 mm micro-particles, meeting P-5 security standards for highly confidential information.
• Large Capacity Bin: Features a 140-liter removable waste bin for easy emptying, capable of holding approximately 1600 shredded A4 sheets.
• Déchiquetage polyvalent : Capable of shredding paper, credit cards, staples, and paper clips.
• Anti-Jam Technology: Designed to prevent paper jams for continuous operation.
• Durée d'exécution prolongée : Operates continuously for up to 240 minutes with fan cooling.
• Interface conviviale : Equipped with a touch control panel and an infrared full bin sensor.

Image: Rexel Optimum AutoFeed 750M Shredder with its automatic feed tray open, highlighting its 750-sheet capacity and P-5 micro-cut security level (2x15 mm particle size).

Informations importantes sur la sécurité

Pour garantir un fonctionnement sûr et éviter les blessures ou les dommages, veuillez respecter les consignes de sécurité suivantes :

• Lire les instructions : Always read and understand all instructions before operating the shredder.
• Tenir à l'écart des enfants et des animaux : This shredder is not a toy. Keep children and pets away from the shredder, especially during operation.
• Avoid Contact with Opening: Keep fingers, loose clothing, jewelry, and hair away from the paper entry slot.
• Source d'alimentation : Connect the shredder only to a properly grounded power outlet with the correct voltage comme indiqué sur l'étiquette du produit.
• Ne surchargez pas : Do not exceed the specified sheet capacity for either automatic or manual feed to prevent jams and damage.
• Pas d'aérosols : Do not use aerosol products, petroleum-based lubricants, or other flammable products on or near the shredder.
• Débrancher lorsque l'appareil n'est pas utilisé : Débranchez toujours le broyeur avant de le déplacer, de le nettoyer ou de vider le bac à déchets.
• Évitez l'eau : Do not operate the shredder in wet conditions or allow water to come into contact with electrical components.
• Placement approprié : Place the shredder on a stable, level surface. Do not block ventilation openings.
• Cordon endommagé : N’utilisez pas le destructeur de documents si le cordon d’alimentation est endommagé. Contactez le service client pour obtenir de l’aide.

Guide d'installation

1. Déballez le broyeur : Retirez délicatement le broyeur de son emballage. Conservez les matériaux d'emballage pour un transport ou un stockage ultérieur.
2. Positionnez le broyeur : Place the shredder on a firm, level surface. Ensure there is adequate space around the unit for ventilation and access to the waste bin.
3. Install Waste Bin: Ensure the 140-liter removable waste bin is correctly inserted into the shredder cabinet. The shredder will not operate if the bin is not properly seated.
4. Connecter l'alimentation : Branchez le cordon d’alimentation sur une prise électrique reliée à la terre.
5. Mise sous tension : Locate the main power switch (usually on the back or side of the unit) and turn it to the 'ON' position. The control panel should illuminate.

Image: The Rexel Optimum AutoFeed 750M Shredder with its 140-liter waste bin open, demonstrating the easy access for emptying shredded materials.

Mode d'emploi

Panneau de configuration terminéview

Image : Avant view of the Rexel Optimum AutoFeed 750M Shredder, showing the touch control panel with various indicators and icons representing its shredding functions, including paper, credit cards, staples, and paper clips.

The touch control panel provides intuitive operation. Refer to the icons on the panel for specific functions such as power, reverse, and error indicators.

Automatic Feed Operation (Up to 750 Sheets)

1. Ensure the shredder is powered on and the waste bin is properly installed.
2. Open the automatic feed tray lid.
3. Stack up to 750 sheets of A4 paper neatly into the automatic feed tray. Ensure there are no folded corners or heavily creased papers.
4. Close the automatic feed tray lid. The shredder will automatically detect the paper and begin shredding.
5. The shredder will stop automatically once all paper in the tray has been shredded.

Manual Feed Operation (Up to 15 Sheets)

1. Assurez-vous que le broyeur est allumé.
2. Insert up to 15 sheets of A4 paper into the manual feed slot. The shredder will automatically start shredding.
3. For credit cards, staples, or paper clips, insert them one at a time into the manual feed slot.
4. The shredder will stop automatically once the material has passed through.

Image: The Rexel Optimum AutoFeed 750M Shredder displaying its manual feed slot, designed for shredding up to 15 sheets of A4 paper at once.

Entretien

Un entretien régulier garantit des performances optimales et prolonge la durée de vie de votre broyeur.

1. Vider la poubelle :
   • When the infrared sensor detects a full bin, an indicator light on the control panel will illuminate, and the shredder will cease operation.
   • Débranchez le broyeur de la prise électrique.
   • Sortez délicatement la poubelle.
   • Empty the shredded material.
   • Reinsert the waste bin securely.
   • Rebranchez le broyeur.
2. Lubrification:
   • For micro-cut shredders, regular lubrication of the cutting blades is crucial.
   • Use Rexel lubricating sheets or high-quality shredder oil specifically designed for paper shredders.
   • Follow the instructions provided with the lubricating sheets or oil. Generally, this involves shredding a lubricating sheet or applying oil across the manual feed slot and then running the shredder in reverse for a few seconds.
   • Lubricate after every bin emptying or after approximately 30 minutes of continuous shredding.
3. Nettoyage:
   • Débranchez le broyeur avant de le nettoyer.
   • Essuyez l'extérieur du destructeur de documents avec un chiffon doux et sec. N'utilisez pas de nettoyants abrasifs ni de solvants.
   • Gently clean the infrared sensor located inside the waste bin area to ensure accurate full bin detection.

Image: A Rexel Optimum AutoFeed Shredder with a visible window showing the accumulation of shredded paper, illustrating the need for bin emptying.

Dépannage

Si vous rencontrez des problèmes avec votre destructeur de documents, consultez les problèmes et solutions courants suivants :

Caractéristiques

Image: The Rexel Optimum AutoFeed 750M Shredder with its key dimensions clearly marked for reference: 114 cm height, 51 cm width, and 59 cm depth.

Informations sur la garantie

This Rexel Optimum AutoFeed 750M Shredder comes with a Garantie constructeur d'un an. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty card included with your product or contact Rexel customer support.

Assistance clientèle

For further assistance, technical support, or to inquire about replacement parts, please visit the official Rexel website ou contactez leur service client. Vous trouverez également plus d'informations et de produits sur le site. Rexel Brand Store on Amazon.