1. Produit terminéview
The Heayzoki DC Motor Speed Controller is designed for precise control of DC brush motors. It features Pulse Width Modulation (PWM) technology for accurate and stable speed adjustment, along with a forward/reverse rotation control switch. The robust circuit board and well-designed casing ensure durability and efficient heat dissipation.
Figure 1 : Face avant view of the Heayzoki DC Motor Speed Controller, highlighting its PWM control, 40A current capacity, and 12-60V DC input range.
2. Spécifications
| Marque | Heayzoki |
| Modèle | Heayzokii4p7n1abgm6351 |
| Vol d'entréetage | DC 12-60V |
| Max actuel | 40A |
| Type de contrôle | PWM (modulation de largeur d'impulsion) |
| Type de moteur | DC Brush Motor |
| Contrôle de rotation | Forward/Reverse/Stop (CCW Reversible Switch) |
| Matériel | Cuivre (composants internes) |
| Dimensions du produit (L x H) | 3.54 po L x 3.9 po H (90 mm x 99 mm) |
| Poids de l'article | 0.26 kilogrammes |
Figure 2: Detailed dimensions of the speed controller for installation planning.
3. Configuration et installation
Follow these steps for proper installation of your DC Motor Speed Controller:
- Coupure de courant : Ensure all power sources are disconnected before beginning installation to prevent electrical shock.
- Montage: Securely mount the controller in a suitable location, considering its dimensions and ensuring adequate ventilation.
- Connexions de câblage : Refer to the wiring diagram below and connect the power supply and motor leads to the appropriate terminals.
- Connectez la borne positive (+) de votre alimentation CC à la +POWER borne sur le contrôleur.
- Connectez la borne négative (-) de votre alimentation CC à -PUISSANCE borne sur le contrôleur.
- Connectez un fil du moteur au +MOTOR Terminal.
- Connectez l'autre fil du moteur au -MOTEUR Terminal.
- Vérifiez les connexions : Double-check all wiring for correct polarity and secure connections. Loose connections can cause malfunction or damage.
Figure 3 : Arrière view of the controller with clearly labeled power and motor terminals for wiring.
4. Mode d'emploi
Once installed, operate the speed controller as follows:
- Mise sous tension : Connect the DC power supply. The red indicator light on the front panel should illuminate.
- Motor Direction Control: Use the three-position switch labeled 'RUN' to select the motor's direction or stop it.
- Placez le commutateur sur UP position for forward rotation.
- Placez le commutateur sur MILIEU position to stop the motor.
- Placez le commutateur sur VERS LE BAS position for reverse rotation.
- Réglage de la vitesse: Rotate the knob labeled 'SPEED CONTROL' to adjust the motor's speed.
- Turn the knob towards 'Low' for slower speeds.
- Turn the knob towards 'High' for faster speeds.
- Éteindre: To turn off the system, first set the direction switch to the 'STOP' (middle) position, then disconnect the main DC power supply.
Figure 4: Front panel controls including the speed adjustment knob and the forward/reverse/stop switch.
5. Entretien
Pour garantir la longévité et les performances optimales de votre variateur de vitesse, suivez ces consignes d'entretien :
- Nettoyage: Periodically clean the exterior of the controller with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no dust or debris accumulates in ventilation openings.
- Inspection: Regularly inspect all wiring connections to ensure they remain secure and free from corrosion or damage.
- Environnement: Utilisez le contrôleur dans les plages de température et d'humidité spécifiées. Évitez toute exposition à une humidité excessive, à la poussière ou à des environnements corrosifs.
- Ventilation: Ensure the controller has adequate airflow around it to prevent overheating, especially during prolonged operation at high loads.
6. Dépannage
If you encounter issues with your Heayzoki DC Motor Speed Controller, refer to the following table:
| Problème | Cause possible | Solution |
|---|---|---|
| Le moteur ne fonctionne pas | No power supply; Incorrect wiring; Faulty motor; Direction switch in 'STOP' position. | Vérifiez les connexions d'alimentation et le volume d'alimentationtage; Verify wiring against diagram; Test motor independently; Ensure direction switch is in 'Forward' or 'Reverse'. |
| Motor runs erratically or at incorrect speed | Loose wiring connections; Incompatible motor; Speed knob setting; Overload. | Check and secure all wiring; Ensure motor is compatible with controller specifications; Adjust speed knob; Reduce motor load. |
| Le contrôleur surchauffe | Excessive load on motor; Insufficient ventilation; Short circuit. | Reduce motor load; Ensure adequate airflow around the controller; Check for short circuits in wiring or motor. |
| Direction switch does not change motor direction | Faulty switch; Incorrect motor type (not reversible). | Verify switch functionality; Confirm motor is a reversible DC brush type. |
Si le problème persiste après avoir essayé ces solutions, veuillez contacter le service client.
7. Informations sur la garantie
Heayzoki products are manufactured to high-quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. The warranty period typically begins from the date of purchase. Please retain your proof of purchase for any warranty claims. The warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or normal wear and tear.
8. Assistance clientèle
For further assistance, technical support, or warranty inquiries, please contact Heayzoki customer service through the retailer where the product was purchased or visit the official Heayzoki brand store online. When contacting support, please have your product model number (Heayzokii4p7n1abgm6351) and purchase details ready.
You can find more information about Heayzoki products at: Heayzoki Store