1. Introduction
Thank you for choosing the KUNPHY 350ml Ultrasonic Cleaner. This device utilizes high-frequency ultrasonic waves (46,000 Hz) to provide thorough and gentle cleaning for various items without causing damage. The ultrasonic vibrations, combined with a gentle water flow, effectively remove hidden dirt and grime from intricate surfaces. This manual provides essential information for the safe and efficient operation of your ultrasonic cleaner.
2. Consignes de sécurité
- Lisez toutes les instructions avant d’utiliser l’appareil.
- Ne plongez pas l'unité principale dans l'eau ou d'autres liquides.
- Vérifiez que le cordon d'alimentation n'est pas endommagé et qu'il est correctement branché à une prise de courant mise à la terre.
- Tenir hors de portée des enfants.
- Ne pas utiliser l'appareil de nettoyage sans liquide dans le réservoir.
- Débranchez l'appareil lorsqu'il n'est pas utilisé et avant de le nettoyer.
- Avoid cleaning scratched or cracked glasses/sunglasses, as ultrasonic cleaning may worsen existing damage.
- Ne démontez pas l'appareil et n'essayez pas de le réparer vous-même. Contactez le service client pour obtenir de l'aide.
3. Produit terminéview
3.1 Composants
- Ultrasonic Cleaner Unit (with 304 stainless steel tank)
- Couvercle transparent
- Power Adapter (integrated or separate, depending on model)
- Watch Stand (included for specific items)
3.2 Caractéristiques
- Nettoyage par ultrasons efficace : 46,000 Hz frequency for deep cleaning.
- Capacité généreuse : 350ml stainless steel tank, suitable for various items.
- Fonctionnement simple : One-button ON/OFF control.
- Arrêt automatique: Device automatically turns off after a cleaning cycle (typically 3 minutes).
- Construction durable : 304 stainless steel interior for corrosion resistance.
- Conception stable : Non-slip silicone strip on the bottom for stability and noise reduction.
- Utilisation polyvalente : Ideal for jewelry, watches, glasses, dentures, electric shaver heads, makeup brushes, combs, and more.

Image 1: KUNPHY 350ml Ultrasonic Cleaner showing its compact design and items it can clean.

Image 2: Versatility of the KUNPHY Ultrasonic Cleaner for various items including watches, dentures, and jewelry.
4. Installation
- Placement: Place the ultrasonic cleaner on a stable, flat, and dry surface. Ensure it is near a power outlet.
- Connexion électrique : Branchez l'adaptateur secteur dans une prise électrique appropriée.
- Remplir le réservoir : Open the lid and fill the stainless steel tank with tap water. Do not exceed the maximum fill line. For enhanced cleaning, a small amount of dish soap or a specialized ultrasonic cleaning solution can be added.

Image 3: Visual guide for filling the tank and placing items.
5. Mode d'emploi
- Préparer les articles : Ensure items to be cleaned are suitable for ultrasonic cleaning. For watches, use the included watch stand if applicable.
- Déposez les objets : Carefully place the items into the water in the stainless steel tank. Ensure items are fully submerged but not overcrowded.
- Commence a nettoyer: Close the lid and press the ON/OFF button to start the cleaning cycle. The device will begin operating, and you may hear a gentle humming sound.
- Arrêt automatique: The cleaner will automatically stop after approximately 3 minutes.
- Inspect and Repeat: After the cycle, open the lid and carefully remove the cleaned items. Rinse them under clean water and dry with a soft cloth. If items are still dirty, you may repeat the cleaning cycle.
- Vide et propre : After use, unplug the device, empty the water from the tank, and wipe the tank and exterior clean.

Image 4: Demonstration of cleaning effectiveness on glasses.

Image 5: Demonstration of cleaning effectiveness on jewelry.
6. Entretien
- Nettoyage du réservoir : After each use, empty the water and wipe the stainless steel tank with a soft cloth. Do not use abrasive cleaners or harsh chemicals.
- Nettoyage extérieur : Essuyez l'extérieur de l'unité avec de la publicitéamp chiffon. Veillez à ce qu'aucune eau ne pénètre dans les composants électroniques.
- Stockage: Store the cleaner in a cool, dry place away from direct sunlight and moisture when not in use.
- Détartrage: If mineral deposits build up in the tank, use a mild descaling solution or vinegar diluted with water, run a short cycle, then rinse thoroughly.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| L'unité ne s'allume pas. | Pas d'alimentation électrique. | Check if the power cord is securely plugged into the unit and the wall outlet. Ensure the outlet is functional. |
| Le nettoyage n'est pas efficace. | Insufficient water or cleaning solution; items too dirty; items overcrowded. | Ensure tank is filled to the appropriate level. Add a small amount of cleaning solution. Clean fewer items at a time. Run multiple cycles if necessary. |
| Bruit inhabituel pendant le fonctionnement. | Unit not on a flat surface; tank empty. | Place the unit on a stable, flat surface. Ensure the tank is filled with water. |
8. Spécifications
- Numéro de modèle : Mor-DE-UC-BCM-187
- Fabricant: SWX
- Capacité: 350 ml
- Fréquence ultrasonique: 46,000 Hz
- Pouvoir: 18 wattheures
- Matériel: PTFE (Polytetrafluoroethylene), 304 Stainless Steel
- Couleur: Blanc
- Dimensions du colis : 31 x 11.2 x 7.9 cm
- Poids: 680 grammes
- Composants inclus : Ultrasonic cleaner unit, watch stand
- Piles requises : Non
- Date de mise en ligne sur Amazon : 15 avril 2022
9. Assistance clientèle
For any questions, concerns, or technical assistance regarding your KUNPHY Ultrasonic Cleaner, please contact our customer service. We aim to provide high-quality support to ensure your satisfaction.