1. Introduction
Thank you for choosing the Tasmor 76-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new light. Please read this manual thoroughly before use and retain it for future reference.
2. Produit terminéview
2.1 Principales caractéristiques
- Haute luminosité: Equipped with 76 warm white energy-saving LEDs, providing 170 lumens of soft, flicker-free light. Color rendering index (CRI) is over 80.
- Mode détecteur de mouvement : Features 3 lighting modes (ON/OFF/Auto). In Auto mode, it detects motion within 3 meters (approximately 10 feet) in darkness and automatically turns off after about 18 seconds of no motion. The detection angle is 120°. If ambient brightness is sufficient, the light will not activate.
- Rechargeable par USB : Conveniently rechargeable via the included USB cable, eliminating the need for frequent battery replacement.
- Installation facile : Magnetic attachment allows for simple installation and removal. No tools required.
- Application polyvalente : Ideal for kitchens, stairs, cabinets, offices, walls, mirrors, closets, hallways, basements, workshops, garages, or as an emergency light.
- Construction durable : Le lamp housing is made of high-quality aluminum alloy, which is rust-proof and easy to clean.
2.2 Contenu du paquet
- Tasmor 76-LED Motion Sensor Cabinet Light
- Câble de chargement USB
- Magnetic Metal Sheets (for adhesive mounting)
- Manuel d'utilisation
Image 2.2.1: The Tasmor 76-LED Motion Sensor Cabinet Light, showing the light bar, USB charging cable, and two magnetic metal sheets for installation.
3. Spécifications techniques
| Marque | Tasmor |
| Modèle | B08LV41TPC |
| Dimensions du produit (L x l x H) | 40.5 x 4 x 0.95 cm (15.9 x 1.6 x 0.4 pouces) |
| Poids | 220 grammes (0.48 livres) |
| Matériel | Iron (housing) |
| Style | Contemporain |
| Couleur claire | Blanc chaud |
| Nombre de LED | 76 |
| Flux lumineux | 170 lumens |
| Température de couleur | 3000K |
| Indice de rendu des couleurs (IRC) | 80.00 |
| Voltage | 3.7 volts |
| Pouvoir | 3 watts |
| Dossier spécial | Détecteur de mouvement |
| Source d'énergie | Alimenté par batterie (rechargeable par USB) |
4. Configuration et installation
The Tasmor cabinet light is designed for easy, tool-free installation using its magnetic attachment system.
4.1 étapes d'installation
- Préparez la surface : Nettoyez soigneusement la surface d'installation souhaitée afin de vous assurer qu'elle est sèche et exempte de poussière ou de graisse.
- Fixer les tôles métalliques : Peel off the protective film from the adhesive side of the provided magnetic metal sheets. Firmly press the metal sheets onto the cleaned surface. Ensure they are spaced appropriately for the length of the light bar.
- Monter la lumière : The light bar has built-in magnets. Simply align the light bar with the installed metal sheets and allow the magnets to secure it in place.
Image 4.1.1: Step-by-step visual guide for installing the light: 1. Cleaning the surface, 2. Attaching the adhesive metal sheet, 3. Magnetically mounting the light bar.
The magnetic attachment allows for easy removal of the light bar for charging or repositioning.
4.2 Examples Applications
Image 4.2.1: Lights installed inside a closet for enhanced visibility.
Image 4.2.2: Lights providing illumination in a bedroom wardrobe and above a desk.
5. Mode d'emploi
La lampe est dotée d'un interrupteur permettant de sélectionner l'un des trois modes de fonctionnement :
- Marche : La lumière reste allumée en permanence.
- Mode ARRÊT : La lumière reste éteinte.
- Mode AUTO (détecteur de mouvement) : The light will automatically turn on when motion is detected in a dark environment. It will turn off approximately 18 seconds after motion ceases. The detection range is up to 3 meters (10 feet) with a 120° angle. The sensor will not activate if the ambient light is sufficient.
Image 5.1.1: The light operating in Auto mode, detecting motion within a 120° angle in a kitchen environment.
6. Chargement de l'appareil
The Tasmor cabinet light is equipped with a rechargeable battery. When the battery is low, the light output may diminish or cease. To charge:
- Remove the light bar from its magnetic mounting.
- Connect the included USB charging cable to the charging port on the light bar.
- Connect the other end of the USB cable to a standard USB power source (e.g., USB adapter, power bank, computer USB port).
- An indicator light will show the charging status: typically red for charging and blue for fully charged.
Image 6.1.1: Close-up of the light bar showing the USB charging port and indicator lights for 'Recharging' (red) and 'Fully Charged' (blue).
7. Entretien et maintenance
- Nettoyage: Use a soft, dry cloth to wipe the surface of the light. For stubborn dirt, a slightly damp cloth can be used, but ensure no water enters the electronic components. Do not use abrasive cleaners or solvents.
- Stockage: If storing the light for an extended period, ensure it is fully charged and store it in a cool, dry place. Recharge periodically to maintain battery health.
- Environnement: Avoid exposing the light to extreme temperatures, direct sunlight, or high humidity.
8. Guide de dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| La lumière ne s'allume pas en mode AUTO. |
|
|
| La lumière ne s'éteint pas. |
|
|
| La lumière est faible. | La batterie est faible. | Chargez complètement la lampe. |
| La lumière ne se charge pas. |
|
|
9. Garantie et support client
Information regarding specific warranty terms and conditions for this product is not available in the provided data. For warranty claims, technical support, or any other inquiries, please contact Tasmor customer service through your purchase platform or the official Tasmor website.