FLAMMA FS05 Multi Modulation Pedal Instruction Manual

Introduction

The FLAMMA FS05 Multi Modulation Pedal is a versatile stereo effects pedal designed for electric guitar. It offers 11 distinct modulation effects and 7 storable preset slots, providing a wide range of tonal possibilities for musicians.

Consignes de sécurité

Always ensure proper power supply connections and use the pedal in a dry environment. Avoid exposing the unit to extreme temperatures or humidity. Disconnect power when not in use or during cleaning.

Contenu du colis

• FLAMMA FS05 Multi Modulation Pedal
• Manuel d'instructions (ce document)
• (Alimentation non incluse)

Produit terminéview

The FS05 pedal features a compact design with intuitive controls for easy operation and sound shaping.

Figure 1: FLAMMA FS05 Multi Modulation Pedal front view.

Commandes et connexions

Figure 2 : Détaillé view of the FS05 control knobs.

• Bouton RATE : Règle la vitesse de l'effet de modulation.
• Bouton TYPE : Selects one of the 11 modulation effects.
• Bouton DEPOUSSE : Contrôle l'intensité ou la profondeur de la modulation.
• Bouton CTRL 1 : Adjusts a primary parameter specific to the selected effect (e.g., Mix, Duty, Pitch).
• Bouton CTRL 2 : Adjusts a secondary parameter specific to the selected effect (e.g., Tone, Feedback, Smooth, Bit Rate).
• Bouton ENREGISTRER/SÉLECTIONNER : Used to save presets or select between them.
• Voyants LED (1-7) : Show the currently selected preset slot.
• Pédale de commande : Activates/deactivates the pedal.
• Input L (Mono) / Input R: Audio input jacks.
• Output L (Mono) / Output R: Audio output jacks.
• DC IN: Power input (9V DC, center negative).

Installation

Alimentation électrique

The FLAMMA FS05 pedal requires a 9V DC power supply with a minimum current of 302mA (center negative). The power supply is NOT INCLUDED with the pedal. Insufficient current may cause operational issues.

Connexion de la pédale

The FS05 supports both mono and stereo connections, offering flexibility for various setups.

Figure 3: Diagram illustrating stereo and mono to stereo connection setups for the FS05 pedal.

• Configuration mono : Connect your guitar to Input L (Mono) and your amplifier to Output L (Mono).
• Configuration stéréo : Connect your guitar to Input L (Mono) and Input R. Connect Output L (Mono) and Output R to your stereo amplificateur ou interface audio.

Mode d'emploi

Selecting Modulation Effects

The FS05 offers 11 distinct modulation effects, ranging from classic to experimental tones. Use the TYPE knob to cycle through the available effects.

Figure 4: List of 11 modulation effects and their corresponding CTRL 1 and CTRL 2 parameters.

The available effects include Chorus, Flanger, Tremolo, Phase, Vibrato, Rotary, Liquid, Auto Wah, Stutter, Ring, and Low Bit.

Adjusting Effect Parameters

Each effect has adjustable parameters via the RATE, DEPTH, CTRL 1, and CTRL 2 knobs. Refer to Figure 4 for specific parameter functions per effect.

Figure 5: The FS05 pedal highlighting its versatile control knobs.

Enregistrement et rappel des préréglages

The pedal features 7 preset slots to save your customized settings. Use the SAVE/SELECT button and LED indicators to manage your presets.

Figure 6: The FS05 pedal showing the 7 preset slots and SAVE/SELECT button.

• Sauver: Adjust the parameters to your desired settings. Press and hold the SAVE/SELECT button until the LED for the current slot flashes, indicating the preset is saved.
• Se rappeler: Briefly press the SAVE/SELECT button to cycle through the 7 preset slots. The corresponding LED will illuminate.

True Bypass / Buffer Bypass

The FS05 features True Bypass to minimize signal loss when the pedal is disengaged. Some videos also mention a low-noise buffer bypass, which helps maintain signal integrity over long cable runs.

Entretien

Clean the pedal's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure all connections are secure before and after use.

Dépannage

• Pas d'alimentation : Ensure the 9V DC power supply is correctly connected and provides sufficient current (minimum 302mA).
• Pas de son : Check all audio cables and connections. Verify the pedal is engaged (footswitch LED illuminated).
• Bruit indésirable : Ensure proper grounding and use a high-quality, isolated power supply.

Caractéristiques

• Modèle: FS05
• Poids de l'article : 10.5 onces (0.3 kilogrammes)
• Dimensions du produit : 2.75"L x 1.97"l x 4.78"H
• Voltage: 9 volts CC
• Tirage actuel : >302mA (Power Supply NOT INCLUDED)
• Type de connecteur : Prise d'alimentation CC 2.1 mm
• Format des signaux : Numérique
• Interface matérielle: USB (for potential firmware updates, not for audio)
• Effets : 11 Modulation Effects (Chorus, Flanger, Tremolo, Phase, Vibrato, Rotary, Liquid, Auto Wah, Stutter, Ring, Low Bit)
• Présélections: 7 Storable Slots
• By-pass: True Bypass

Garantie et assistance

Pour obtenir des informations sur la garantie et une assistance technique, veuillez consulter le site officiel du fabricant. webConsultez notre site web ou contactez votre concessionnaire local. Conservez votre reçu d'achat comme preuve d'achat.