FLEXISPOT EN2 55x28 Electric Height Adjustable Standing Desk Instruction Manual

1. Introduction

Thank you for choosing the FLEXISPOT EN2 55x28 Electric Height Adjustable Standing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read all instructions carefully before use and retain this manual for future reference.

2. Consignes de sécurité

• Assurez-vous que toutes les pièces sont présentes et en bon état avant l'assemblage.
• Assembly may require two people due to the weight of components.
• Tenez les enfants et les animaux domestiques éloignés du bureau pendant son utilisation.
• Ne surchargez pas le bureau. Le poids maximal recommandé est de 70 kg (154 livres).
• Ensure all electrical connections are secure and follow local electrical safety standards.
• Évitez de déposer des liquides directement sur le panneau de commande ou à proximité des composants électriques.
• Utilisez uniquement l’adaptateur secteur fourni.
• Do not disassemble or modify the desk's motor or control system.

3. Contenu du colis

Your FLEXISPOT EN2 desk will arrive in two separate packages. Please verify all components against the packing list before beginning assembly.

• Desktop (55" x 28" White Top)
• Desk Frame (Gray Frame)
• Colonnes de levage (Pieds)
• Traverse
• Plaques de support
• Moteur
• Control Panel (Keypad)
• Adaptateur secteur et câbles
• Clamp Power Strip with 3 AC Outlets and 2 USB Ports
• Plateau de gestion de câbles
• Assembly Hardware (screws, hex keys, wrench)
• Manuel d'instructions

4. Instructions de montage

Please follow these steps carefully. An electric drill (not included) may be required for some steps.

1. Préparer le bureau : Lay the desktop upside down on a soft, clean surface to prevent scratches. The packaging includes foam pads that can be used for this purpose.
2. Installez le moteur : Attach the motor to the right lifting column. Ensure the motor's gear aligns with the column's mechanism and secure it with the provided screws and hex key. Tighten screws gradually and evenly.
3. Attach Lifting Columns to Crossbeam: Connect the lifting columns to the crossbeam. Ensure the orientation is correct as per the manual (e.g., motor side).
4. Installer les plaques de support : Secure the support plates to the lifting columns using the specified screws.
5. Installer les pieds du bureau : Attach the desk feet to the bottom of the lifting columns. Ensure they are securely fastened.
6. Installer la tige de transmission : Insert the transmission rod between the lifting columns, connecting it to the motor. Loosen the nut on the rod if necessary for insertion, then tighten it.
7. Mount the Control Panel (Keypad): Position the control panel on the underside of the desktop, typically on the front right edge for easy access. Secure it with the provided screws.
8. Mount the Cable Management Tray: Assemble the cable management tray by bending it along the perforated lines. Mount it to the underside of the desktop using the provided screws. Ensure the shorter lip faces the back to allow cables to drop in.
9. Connecter le câblage : Connect the motor cable, control panel cable, and power adapter to the main control box. Use the provided cable ties and adhesive clips to organize and secure all cables neatly under the desk and within the cable management tray.
10. Attacher Clamp Multiprise : Le CLamp power strip can be attached to the back or side of your desk. Adjust the clamp to fit your desktop thickness and secure it in your desired location.
11. Vérification finale : Ensure all screws are tightened and all cables are securely connected and managed. Carefully flip the desk upright.

5. Mode d'emploi

Your FLEXISPOT EN2 desk features an intuitive 6-button digital controller for easy height adjustment and memory presets.

• Boutons Haut/Bas (flèches) : Press the up arrow to raise the desk and the down arrow to lower it. The current height will be displayed on the LED screen.
• Préréglages de mémoire (1, 2, 3, 4) : Your desk can store up to four preferred height settings. To set a memory position:
  1. Réglez le bureau à la hauteur souhaitée à l'aide des flèches haut/bas.
  2. Appuyez sur le bouton « M ». L'écran LED affichera « S- ».
  3. Press the desired number button (1, 2, 3, or 4) within 3 seconds. The height is now saved.
• Fonction anti-collision : The desk is equipped with an anti-collision system. If the desk encounters an obstacle during movement, it will stop and reverse slightly to prevent damage. You can adjust the sensitivity of this feature (refer to the full manual for detailed instructions on adjusting sensitivity levels).

6. Caractéristiques

• Prise de courant amovible pour bureau : Equipped with 3 power outlets and 2 USB charging ports, clip it to the back or side of your desk.
• Ample bureau en une seule pièce : FSC-Certified wood desktop (55" x 28") provides generous space. Hand-measured: ±1" tolerance.
• 4 boutons de mémoire : 6-button digital controller with 4 programmable memory presets.
• Réglage motorisé de la hauteur : Smoothly adjusts from 28.1” to 45.7” with a quiet motor (less than 50 dB).
• Construction durable : Industrial-grade steel frame and solid tabletop support up to 176 pounds.
• Gestion des câbles: Integrated cable management device to keep your workspace tidy.

7. Spécifications

8. Entretien

• Nettoyage: Essuyez les surfaces du bureau avec de l'eau.amp tissu. Évitez les produits chimiques agressifs qui pourraient endommager la finition.
• Contrôles réguliers : Vérifiez régulièrement le serrage de toutes les vis et boulons. Resserrer si nécessaire.
• Inspection des câbles : Regularly inspect power cords and connections for any signs of wear or damage. Replace immediately if damage is found.

9. Dépannage

Si vous rencontrez des problèmes avec votre bureau, veuillez consulter les solutions courantes suivantes :

• Le bureau ne bouge pas : Check all cable connections, especially the power adapter and motor cable. Ensure the power outlet is functioning.
• Uneven Movement/Wobble: Ensure all assembly screws are tightened evenly. Check if the desk is placed on a level surface. Adjust the leveling feet if necessary.
• Le panneau de configuration ne répond pas : Try resetting the desk. (Refer to the full manual for specific reset procedures, often involves holding down specific buttons until 'RST' appears).
• Déclenchement fréquent du système anticollision : The sensitivity of the anti-collision feature might be too high. Refer to the full manual for instructions on adjusting sensitivity levels.

10. Garantie et assistance

Your FLEXISPOT EN2 desk comes with a comprehensive warranty:

• Garantie de 5 ans : Il couvre les châssis, les moteurs et autres dispositifs mécaniques.
• Garantie de 2 ans : Couvre les contrôleurs, les interrupteurs et l'électronique.

For warranty claims, technical support, or any questions not covered in this manual, please contact FLEXISPOT customer service through their official website or the retailer where you purchased the product. Please have your model number (EN2) and proof of purchase ready.