Ninestars DZT-12-13BURG Motion Sensor Trash Can User Manual

Introduction

Thank you for choosing the Ninestars DZT-12-13BURG Motion Sensor Trash Can. This product is designed to provide a convenient and hygienic waste disposal solution with its advanced infrared motion sensor technology. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance. Keep this manual for future reference.

Consignes de sécurité

• Do not immerse the lid in water or any other liquid. The lid contains electronic components that can be damaged by moisture.
• Nettoyer le couvercle avec annonceamp tissu seulement.
• Avoid direct sunlight on the sensor window, as this may interfere with its operation.
• Do not force the lid open or closed manually, as this may damage the gear system.
• Keep the trash can away from children and pets to prevent accidental injury or damage.
• Utilisez uniquement le type de batterie spécifié et assurez-vous de respecter la polarité lors de l'installation.
• Jetez les piles usagées conformément aux réglementations locales.

Contenu du colis

Vérifiez que tous les composants sont présents dans le package :

• Trash Can Base
• Couvercle à détecteur de mouvement
• Anneau de revêtement

Installation

1. Installation de la batterie

1. Repérez le compartiment à piles sous le couvercle.
2. Ouvrez le couvercle du compartiment à piles.
3. Insert 2 'AA' size batteries (not included) according to the polarity indicators (+/-).
4. Fermez soigneusement le couvercle du compartiment à piles.

2. Installation de l'anneau de doublure et du sac poubelle

1. Remove the liner ring from the trash can base.
2. Place a standard trash bag (approximately 3-gallon capacity) into the trash can base.
3. Fold the top edge of the trash bag over the liner ring. Ensure the bag is securely held by the ring.
4. Insert the liner ring with the trash bag back into the trash can base. The liner ring helps to conceal the trash bag and keep it in place.

Image: The lid is open, revealing the black liner ring inside the burgundy trash can. The infrared sensor is visible on the underside of the lid.

3. Attaching the Lid

Carefully place the motion sensor lid onto the trash can base, ensuring it sits securely.

4. Placement initial

Place the trash can in your desired location. Ensure there are no obstructions directly above the sensor that could trigger it unintentionally.

Image : Avant view of the Ninestars DZT-12-13BURG Motion Sensor Trash Can in burgundy, with its sleek, rectangular design and black motion sensor lid.

Mode d'emploi

1. Mise sous/hors tension

Locate the power switch on the back of the lid. Flip the switch to the 'ON' position to activate the motion sensor. Flip it to 'OFF' to deactivate the sensor and conserve battery life when not in use.

Image : Dos view of the burgundy trash can, highlighting the black lid with a red power switch in the 'ON' position.

2. Fonctionnement du capteur de mouvement

• Once powered on, the infrared sensor is active.
• Wave your hand or an object within 10 inches (25 cm) above the sensor window.
• Le couvercle s'ouvrira automatiquement.
• The lid will remain open for approximately 5 seconds, then close automatically.
• If an object remains within the sensor's range, the lid will stay open until the object is removed.

3. Manual Override (Stay Open Function)

While the lid is open, you can press the 'OPEN' button (if present on your model, typically near the sensor) to keep the lid open for longer periods. Press the 'CLOSE' button to close it manually, or it will close automatically after a set time if no 'OPEN' button is available and the sensor is clear.

Entretien

1. Cleaning the Trash Can

• Couvercle: Wipe the lid with a soft, damp chiffon. Ne pas utiliser de nettoyants abrasifs ni immerger le couvercle dans l'eau.
• Base: The stainless steel and plastic base can be cleaned with a mild detergent and a soft cloth. Rinse thoroughly and dry immediately to prevent water spots.
• Fenêtre du capteur : Keep the sensor window clean and free of dust or debris to ensure optimal performance. Use a soft, dry cloth to gently wipe it.

2. Remplacement de la batterie

When the lid's operation becomes slow or inconsistent, it is time to replace the batteries. Follow the battery installation steps in the Setup section.

Dépannage

Caractéristiques