Manuel d'utilisation de la bouée motorisée Poolcandy Tube Runner

Introduction

Welcome to the Poolcandy Tube Runner Motorized Pool Tube. This deluxe inflatable float is designed to provide effortless movement and relaxation in pools and lakes. Featuring a powerful battery-powered motor and 360-degree control, it offers a unique water experience for adults, teens, and kids. Please read this manual thoroughly before use to ensure safe and optimal operation.

Informations importantes sur la sécurité

• Adult supervision is required for children using this product.
• Ne pas dépasser la limite de poids maximale de 250 livres.
• Ensure the 3-blade propeller is fully enclosed behind its protective safety grill before and during use.
• Keep the battery compartment dry. Always remove batteries when the float is not in use or before long-term storage to prevent corrosion and damage.
• This product is intended for use in calm water environments such as pools and lakes. Do not use in strong currents, open ocean, or areas with heavy boat traffic.
• Inspect the float and motor unit for any damage or leaks before each use. Do not use if damaged.
• This is not a life-saving device. Users should be proficient swimmers.

Composants du produit

Your Poolcandy Tube Runner includes the following main components:

• Inflatable Tube Runner float (48" diameter, 40 MM Heavy Duty PVC)
• Motor unit with 3-blade propeller
• Manette de commande

This image highlights the main features of the Tube Runner, including the large backrest, grip handles, convenient cup holder, and the 66W 360-degree thrust motor. The float is constructed from 40 MM Heavy Duty PVC.

Guide d'installation

1. Inflation

Locate the air valves on the inflatable tube. Use a standard air pump (not included) to inflate the float until it is firm to the touch but not overinflated. Ensure all valves are securely closed after inflation.

2. Installation de la batterie

The Tube Runner motor requires 6 piles D (non inclus).

1. Repérez le compartiment de la batterie sur le bloc moteur.
2. Ouvrez soigneusement le compartiment.
3. Insert 6 D-cell batteries, ensuring correct polarity (+ / -) comme indiqué à l'intérieur du compartiment.
4. Refermez soigneusement le couvercle du compartiment à piles pour empêcher toute infiltration d'eau.

This image demonstrates the correct way to install the 6 D-cell batteries into the motor unit. Proper battery installation and a secure seal are crucial for operation and to prevent water damage.

3. Motor Attachment

Insert the motor unit into the designated opening on the underside of the float. Ensure it is securely fastened and the propeller is positioned correctly beneath the float. The control joystick should be easily accessible from the seating area.

Mode d'emploi

Commencer

Once the Tube Runner is inflated and the motor is installed, carefully place it in the water. Sit comfortably in the center of the float.

Contrôle

The Tube Runner is controlled by a single joystick, offering intuitive 360-degree movement:

• Poussez la manette avant pour avancer.
• Tirez la manette en arrière to move in reverse.
• Déplacez la manette gauche ou droite to turn in those directions.
• The 360-degree control allows for full maneuverability, including spinning in place.

This image shows a user comfortably seated on the Tube Runner, holding the control joystick. The float is designed for easy navigation and relaxation in the water.

This image illustrates the motor's position beneath the float and emphasizes its ability to provide full 360-degree movement, allowing for versatile navigation in the water.

Entretien et maintenance

• Nettoyage: After each use, rinse the float and motor unit with fresh water to remove chlorine, salt, or debris.
• Séchage: Thoroughly dry all components, especially the motor and battery compartment, before storage. Water ingress into the battery compartment can cause damage.
• Entretien de la batterie: Always remove batteries from the motor unit when the float is not in use or before long-term storage. This prevents corrosion and extends battery life.
• Stockage: Store the deflated float and motor in a cool, dry place away from direct sunlight and extreme temperatures. Avoid folding the float tightly to prevent creases or damage.

Dépannage

Spécifications du produit

Informations sur la garantie

The Poolcandy Tube Runner Motorized Pool Lounger comes with a One-Year warranty provided by B&D Group. This warranty covers manufacturing defects and ensures confidence in your purchase. For warranty claims or detailed terms, please refer to the customer support contact information below.

Assistance clientèle

For further assistance, questions, or troubleshooting not covered in this manual, please contact Poolcandy customer support:

Website: www.poolcandy.net

E-mail: support@poolcandy.net