Hyper GEN2 12-in-1 USB-C Hub

Hyper Drive GEN2 12-in-1 USB-C Docking Station User Manual

Model: GEN2 12-in-1 USB-C Hub

Introduction

The Hyper Drive GEN2 12-in-1 USB-C Docking Station is designed to expand the connectivity of your USB-C enabled laptop or tablet. This docking station provides a comprehensive solution for connecting multiple peripherals, external displays, and power delivery through a single USB-C port. It supports high-speed data transfer, multiple 4K video outputs, and efficient power charging for enhanced productivity.

Caractéristiques du produit

The Hyper Drive GEN2 12-in-1 USB-C Docking Station offers a wide array of ports and capabilities:

  • Dual HDMI 4K60Hz HDR: Connect up to two external displays with stunning 4K resolution at 60Hz, supporting High Dynamic Range (HDR) for vibrant visuals.
  • DisplayPort 4K60Hz: Connect an additional external display via DisplayPort, also supporting 4K resolution at 60Hz.
  • USB-C Power Delivery (PD) 100W: Charge your host laptop or tablet with up to 100W of power through the dedicated USB-C PD port.
  • 2x USB-A 10Gbps (USB 3.1 Gen 2): Experience ultra-fast data transfer speeds for compatible USB-A devices.
  • 2x USB-A 2.0 : Connect standard USB peripherals such as keyboards, mice, or printers.
  • Gigabit Ethernet: Enjoy stable and high-speed wired network connectivity.
  • MicroSD UHS-II (300MB/s): Fast data transfer for MicroSD cards, ideal for photographers and videographers.
  • SD UHS-II (300MB/s): Fast data transfer for standard SD cards.
  • Prise audio 3.5 mm : Branchez des écouteurs ou des haut-parleurs pour la sortie audio.
Devant view of Hyper Drive GEN2 12-in-1 USB-C Hub showing MicroSD, SD, 3.5mm Audio, and two USB-A 10Gbps ports.

Figure 1 : Face avant view of the Hyper Drive GEN2 12-in-1 USB-C Hub, highlighting MicroSD, SD, 3.5mm Audio, and two USB-A 10Gbps ports.

Arrière view of Hyper Drive GEN2 12-in-1 USB-C Hub showing USB-C PD, Gigabit Ethernet, DisplayPort, two HDMI, and two USB-A 2.0 ports.

Figure 2 : Arrière view of the Hyper Drive GEN2 12-in-1 USB-C Hub, highlighting USB-C Power Delivery, Gigabit Ethernet, DisplayPort, two HDMI, and two USB-A 2.0 ports.

Guide d'installation

  1. Se connecter au périphérique hôte : Plug the integrated USB-C cable from the docking station into an available USB-C port on your laptop or tablet. Ensure the USB-C port on your host device supports DisplayPort Alternate Mode (Alt Mode) and Power Delivery for full functionality.
  2. Connexion électrique (facultative mais recommandée) : For optimal performance and to charge your host device, connect your laptop's USB-C power adapter to the USB-C PD port on the docking station. The docking station supports up to 100W power delivery.
  3. Connecter des écrans externes :
    • Connect your HDMI monitors to the HDMI ports on the docking station.
    • Connect your DisplayPort monitor to the DisplayPort on the docking station.

    Note: For macOS, only one extended display is supported with the same image on all external displays at 4K60Hz. Windows/Chrome OS supports Multi-Stream Transport (MST) for up to three extended displays.

  4. Connectez les périphériques : Plug your USB devices (keyboard, mouse, external drives), Ethernet cable, and audio devices into the corresponding ports on the docking station.
Laptop connected to Hyper Drive GEN2 12-in-1 USB-C Hub and power adapter.

Figure 3: Laptop connected to the docking station and a power adapter for charging.

Laptop connected to Hyper Drive GEN2 12-in-1 USB-C Hub with two external monitors, mouse, and phone.

Figure 4: A typical setup showing a laptop connected to the docking station with multiple peripherals and external displays.

Mode d'emploi

Modes d'affichage

La station d'accueil prend en charge différentes configurations d'affichage en fonction de votre système d'exploitation :

  • macOS: Supports one extended display with the same image mirrored across all external displays at 4K60Hz. macOS does not support Multi-Stream Transport (MST) for independent extended displays.
  • Windows/Chrome OS: Supports Multi-Stream Transport (MST), allowing for up to three extended displays with independent content at 4K60Hz.
Diagram illustrating multiple display modes for macOS and Windows/Chrome OS with the Hyper Drive GEN2 12-in-1 USB-C Hub.

Figure 5: Illustration of display modes for macOS (mirror mode) and Windows (mirror and extended modes) using the docking station.

Data Transfer and Power Delivery

  • USB-A 10Gbps Ports: Use these ports for high-speed data transfer with compatible external hard drives, SSDs, or other USB 3.1 Gen 2 devices.
  • Ports USB-A 2.0 : Ideal for connecting standard peripherals like keyboards, mice, or USB flash drives where high-speed data transfer is not critical.
  • SD/MicroSD Card Slots: Insert your memory cards for quick access and transfer of photos and videos at up to 300MB/s (UHS-II speeds).
  • Port USB-C PD : Connect your laptop's power adapter to this port to charge your laptop while using the docking station. This port also supports data transfer.

Vidéo 1 : Fin officielleview of the HyperDrive GEN2 USB-C Hub, demonstrating its speed, power, and various port functionalities.

Entretien

  • Conservez la station d'accueil dans un environnement propre et sec.
  • Évitez d'exposer l'appareil à des températures extrêmes ou à la lumière directe du soleil.
  • Nettoyez l'extérieur avec un chiffon doux et sec. N'utilisez pas de nettoyants liquides ni d'aérosols.
  • Assurez une ventilation adéquate autour de l’appareil pour éviter toute surchauffe.

Dépannage

No display output or flickering screen:
  • Assurez-vous que le port USB-C de votre appareil hôte prend en charge le mode alternatif DisplayPort.
  • Vérifiez toutes les connexions des câbles (USB-C à l'hôte, HDMI/DP aux moniteurs).
  • Essayez un autre câble HDMI ou DisplayPort.
  • Verify your monitor input settings are correct.
  • For macOS, remember that only one extended display is supported, with other external displays mirroring the extended one.
Périphériques USB non reconnus :
  • Reconnect the USB device to the docking station.
  • Essayez un autre port USB sur la station d'accueil.
  • Ensure the docking station is properly connected to your host device.
  • If using high-power USB devices, ensure the docking station is connected to a power source via its USB-C PD port.
L'ordinateur portable ne charge pas :
  • Ensure your laptop's original USB-C power adapter is connected to the USB-C PD port on the docking station.
  • Vérifiez que votre ordinateur portable prend en charge la technologie USB-C Power Delivery.
  • Vérifiez que l'adaptateur secteur et le câble ne sont pas endommagés.

Caractéristiques

FonctionnalitéSpécification
ModèleGEN2 12-in-1 USB-C Hub
MarqueHyper
Ports HDMI2x HDMI 4K60Hz HDR
DisplayPort1x DisplayPort 4K60Hz
Port USB-C PD1x Alimentation USB-C 100W
Ports de données USB-A2x USB-A 10Gbps (USB 3.1 Gen 2), 2x USB-A 2.0
Ethernet1x Gigabit Ethernet
Lecteurs de cartes1x MicroSD UHS-II (300MB/s), 1x SD UHS-II (300MB/s)
Prise audio1 prise audio 3.5 mm
Systèmes d'exploitation compatiblesmacOS, Windows, Chrome OS
Poids de l'article480.8 gramme
Code UPC817110014519

Garantie et assistance

For warranty information and technical support, please refer to the official Hyper webConsultez leur site web ou contactez leur service client. Conservez votre reçu d'achat pour toute réclamation au titre de la garantie.

Support en ligne: www.hyper.com/support

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.