Hunter X2 1401 Irrigation Controller User Manual

Introduction

This manual provides instructions for the installation, operation, and maintenance of your Hunter X2 1401 Irrigation Controller. The X2 controller is a 14-station device designed for efficient and convenient garden watering, featuring Wi-Fi compatibility for remote management via the Hydrawise system.

Consignes de sécurité

Please read all safety warnings and instructions carefully before installing or operating the controller. Failure to do so may result in injury or damage to the product.

• Coupez toujours l'alimentation électrique avant d'effectuer tout câblage ou opération de maintenance.
• Ensure the controller is installed in a location protected from direct sunlight and extreme weather conditions, as it is an outdoor model.
• All electrical connections must comply with local building codes.
• Do not attempt to repair the controller yourself. Contact qualified service personnel.

Produit terminéview

The Hunter X2 1401 is an advanced irrigation controller that builds upon the reliable X-Core series. It offers a comprehensive set of features for optimizing watering schedules and conserving water.

• 14-Station Capacity: Manages up to 14 independent watering zones.
• Compatibilité Wi-Fi : Ready for connection with the optional Wi-Fi Wand module (sold separately) for remote management.
• Hydrawise Technology: When connected to Wi-Fi, it uses local weather data to automatically adjust watering schedules, optimizing water savings.
• Affichage rétroéclairé : Provides optimal visibility in various lighting conditions.
• Programmation flexible : Features 3 flexible programs with 4 start times each and run times up to 6 hours.
• QuickCheck: Easy diagnostic tool for identifying faulty wiring.
• Protection de court circuit: Detects wiring errors to prevent damage.
• Ajustement saisonnier : Allows for easy adjustment of watering duration across all zones.
• Watering Suspension: Ability to pause watering for up to 99 days during off-season or rainy periods.

Figure 1: Hunter X2 1401 Irrigation Controller with its protective casing closed, mounted on a wooden surface. This shows the exterior appearance of the unit when installed.

Installation

1. Montage du contrôleur

The X2 1401 is designed for outdoor installation. Choose a location that is easily accessible, close to the main water supply and power outlet, and protected from direct impact.

1. Use appropriate screws and anchors to securely mount the controller to a wall or sturdy surface.
2. Ensure the controller is level to prevent moisture accumulation.

Figure 2: The Hunter X2 1401 controller with its front cover open, revealing the control panel, rotary dial, display, and the wiring terminal block at the bottom. A quick reference guide is visible on the inside of the cover.

2. Câblage du contrôleur

Before wiring, ensure the power supply to the controller is disconnected.

1. Connect the common wire (usually white) from your valves to the terminal marked 'C' (Common).
2. Connect each zone valve wire to its corresponding station terminal (1-14).
3. If using a master valve or pump start relay, connect its wire to the terminal marked 'MV' (Master Valve).
4. Raccordez l'alimentation électrique conformément aux normes électriques locales.

Figure 3 : Gros plan view of the Hunter X2 1401 controller with the cover open, highlighting the wiring terminal block at the bottom. Multiple colored wires are connected, demonstrating the station and common wire connections.

3. Installing the Wi-Fi Wand (Optional)

The Wi-Fi Wand module (not included) enables smart features and remote control.

1. Locate the dedicated port for the Wi-Fi Wand on the side of the controller.
2. Carefully insert the Wi-Fi Wand into the port until it clicks into place.
3. Once installed, power on the controller. The display will indicate Wi-Fi status.

Mode d'emploi

Manual Programming (Without Wi-Fi)

The X2 controller can be programmed directly using the rotary dial and buttons on the control panel.

Figure 4 : Un aperçu détaillé view of the Hunter X2 1401 control panel, showing the backlit LCD display, the central rotary dial for mode selection, and the navigation buttons for setting parameters.

1. Définir la date/l'heure : Turn the dial to 'Date/Time' and use the arrow buttons to set the current date and time.
2. Définir les heures de début : Turn the dial to 'Start Times'. Select a program (A, B, or C) and set up to 4 start times for each program.
3. Définir les durées d'exécution : Turn the dial to 'Run Times'. For each program, set the watering duration for each station (up to 6 hours).
4. Définir les jours d'arrosage : Turn the dial to 'Water Days'. Select specific days of the week, odd/even days, or interval watering.
5. Ajustement saisonnier : Turn the dial to 'Seasonal Adjust' to globally increase or decrease watering durations by a percentage.
6. Système désactivé : Turn the dial to 'System Off' to suspend all automatic watering.
7. Courir: Turn the dial to 'Run' for automatic operation based on your programmed schedule.

Wi-Fi and Hydrawise App Operation (with Wi-Fi Wand)

Once the Wi-Fi Wand is installed and the controller is connected to your home network, you can manage it remotely using the Hydrawise app or web interface.

1. Download the Hydrawise App: Rechercher "Hydrawise" in your smartphone's app store or visit the Hydrawise website.
2. Créer un compte: Follow the on-screen instructions to create a new Hydrawise account.
3. Add Controller: Use the app's setup wizard to connect your X2 controller to your Hydrawise account. This typically involves scanning a QR code or entering a serial number.
4. Configure Watering Plans: Within the Hydrawise app, you can create and modify watering schedules, utilize predictive watering based on local weather, and monitor system status in real-time.
5. Télécommande: Start, stop, or suspend watering for individual zones or the entire system from anywhere with an internet connection.

Entretien

The Hunter X2 1401 controller requires minimal maintenance to ensure long-term performance.

• Nettoyage: Periodically wipe the exterior of the controller with a damp chiffon pour enlever la poussière et la saleté. N'utilisez pas de nettoyants ou de solvants abrasifs.
• Inspection du câblage : Annually inspect all wiring connections for corrosion or loose terminals. Ensure the casing is securely closed to protect internal components.
• Hivérisation: In regions with freezing temperatures, follow standard irrigation system winterization procedures, which may include disconnecting the controller and storing it indoors.

Dépannage

Caractéristiques

Garantie et assistance

For warranty information and technical support, please refer to the documentation included with your product or visit the official Hunter website. You may also contact your authorized Hunter dealer.

Fabricant: Chasseur