Manuel d'utilisation de l'imprimante 3D Artillery Hornet

1. Introduction

Welcome to the Artillery Hornet 3D Printer User Manual. This guide provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your new 3D printer. The Artillery Hornet is designed for ease of use and high-quality printing, featuring a highly pre-assembled structure and advanced components for reliable performance.

2. Consignes de sécurité

• Utilisez toujours l'imprimante dans un endroit bien ventilé.
• Gardez les mains éloignées des pièces mobiles pendant le fonctionnement.
• Ne touchez pas la buse ou le plateau chauffant pendant ou immédiatement après l'impression, car ils peuvent atteindre des températures élevées.
• Vérifiez que l'alimentation électrique est correctement branchée et mise à la terre.
• Unplug the printer from the power source before performing any maintenance or cleaning.
• Tenez l'imprimante éloignée des matériaux inflammables et de la lumière directe du soleil.
• Supervise children and pets when the printer is in operation.

3. Contenu du colis

Lors du déballage, veuillez vérifier que tous les composants sont présents :

• Artillery Hornet 3D Printer (95% pre-assembled)
• Porte-bobine de filament
• Câble d'alimentation
• Câble USB
• Tool Kit (wrenches, screwdrivers, etc.)
• Carte SD avec test Files et logiciels
• Manuel de l'utilisateur (ce document)
• Sample filament

4. Produit terminéview

The Artillery Hornet features a robust metal integrated structure and a sleek design. Key components include:

Figure 4.1 : Dans l'ensemble view of the Artillery Hornet 3D Printer.

Figure 4.2: Close-up of the innovative integrated cabling system, designed to prevent cable dangling and ensure a neat setup.

Figure 4.3: Details of the New Titan Extruder and Modular Hotend, crucial for stable and precise filament feeding and melting.

Figure 4.4: The self-developed 32-bit motherboard with replaceable drivers, enabling ultra-silent printing and enhanced performance.

Figure 4.5: The user-friendly one-key knob integrated switch for easy operation and the adjustable filament holder designed to maintain a low center of gravity.

5. Guide de configuration

The Artillery Hornet is designed for quick and easy assembly, being 95% pre-assembled. Follow these steps to complete the setup:

Figure 5.1: The printer arrives 95% pre-assembled, requiring only a few minutes for final setup.

1. Déballage: Retirez soigneusement tous les composants de l'emballage.
2. Fixer le portique : Secure the pre-assembled gantry to the base unit using the provided screws. The integrated cabling simplifies this connection.
3. Installer le porte-filament : Mount the adjustable filament holder to the designated slot on the side of the printer.
4. Connecter l'alimentation : Branchez le câble d'alimentation à l'imprimante, puis à une prise électrique mise à la terre.
5. Mise sous tension : Flip the power switch located at the rear of the base unit.
6. Nivellement du lit : Perform manual bed leveling as instructed on the printer's display or in the detailed guide on the included SD card. Proper bed leveling is crucial for successful prints.

6. Mode d'emploi

Operating the Artillery Hornet is intuitive, thanks to its one-key knob integrated switch and efficient design.

6.1. Chargement des filaments

1. Place your filament spool onto the adjustable filament holder.
2. Feed the filament through the filament sensor and into the Titan Extruder.
3. Heat the hotend to the appropriate temperature for your filament type (e.g., 200°C for PLA).
4. Use the one-key knob to select the 'Load Filament' option. The extruder will automatically pull the filament through the hotend until it extrudes smoothly.

6.2. Démarrer une impression

1. Prepare your 3D model using a slicing software (e.g., Cura, PrusaSlicer) and save it as a G-code file à la carte SD.
2. Insérez la carte SD dans le logement pour carte SD de l'imprimante.
3. Navigate the menu using the one-key knob to 'Print from SD' and select your desired G-code file.
4. The printer will automatically heat up the bed and hotend, then begin printing. The self-developed 32-bit motherboard ensures ultra-silent operation during printing.

7. Entretien

Regular maintenance ensures optimal performance and longevity of your Artillery Hornet 3D Printer.

• Nettoyer le plateau d'impression : After each print, clean the print bed with isopropyl alcohol to ensure good adhesion for future prints.
• Nettoyage des buses : Periodically clean the nozzle to prevent clogs. Use a brass brush or needle to clear any residue.
• Lubrifier la tige de l'axe Z : Apply a small amount of lithium grease or similar lubricant to the Z-axis lead screw every few months to ensure smooth vertical movement.
• Vérifier les courroies : Inspect the X and Y axis belts for proper tension and wear. Adjust if too loose or replace if damaged.
• Nettoyage du ventilateur : Ensure cooling fans (for hotend, part cooling, and power supply) are free from dust and debris to prevent overheating.

8. Dépannage

Voici quelques problèmes courants et leurs solutions potentielles :

9. Spécifications

Figure 9.1: Dimensions of the Artillery Hornet 3D Printer.

10. Garantie et assistance

For warranty information and technical support, please refer to the documentation included with your product or visit the official Artillery webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.