Introduction
This instruction manual provides essential information for the proper installation, operation, and maintenance of your Anlapus 1080P TVI Outdoor Surveillance Camera. Please read this manual thoroughly before using the product to ensure optimal performance and safety. This camera is designed for use with HD-TVI DVR systems.
Contenu du colis
Veuillez vérifier que tous les articles listés ci-dessous sont inclus dans votre colis. Si un article est manquant ou endommagé, veuillez contacter le service client.
- 4 x Anlapus 1080P TVI Surveillance Cameras
- 4 x BNC Video Cables (60ft each)
- 1 x bloc d'alimentation
- 1 x 1-to-4 Power Splitter Cable
- 4 sachets de vis de fixation
- 4 x Gabarits de trous de montage
- 4 autocollants d'avertissement
- 1 x Guide de démarrage rapide (ce manuel)

Produit terminéview
The Anlapus 1080P TVI Outdoor Surveillance Camera is designed to provide reliable security monitoring with high-definition video quality and robust construction.
Caractéristiques principales :
- Résolution HD 1080P : Capture des vidéos claires et détailléestage (1920x1080 pixels).
- 90 degrés de large ViewAngle d'attaque : Provides extensive coverage with a 3.6mm lens.
- Vision nocturne sur 24 mètres : Equipped with 24 IR-Cut LEDs for clear black and white images in low-light conditions.
- Boîtier étanche IP66 : métal durable casing protects against dust, rain, and extreme weather, suitable for both indoor and outdoor use.
- HD-TVI Compatibility: Specifically designed to work with HD-TVI DVR systems.



Configuration et installation
Contrôle de compatibilité:
Before installation, ensure your Digital Video Recorder (DVR) is compatible with HD-TVI cameras. This camera is designed exclusively for HD-TVI DVR systems.
Options de montage :
The camera features a flexible bracket that supports both ceiling and wall mounting. The bracket allows for 360-degree horizontal and 180-degree vertical adjustment to achieve the desired viewangle de vue.

Schéma de connexion :
Follow the diagram below to connect the camera to your HD-TVI DVR system. Ensure all connections are secure before powering on the system.

Mode d'emploi
Once the camera is properly installed and connected to a compatible HD-TVI DVR, the system will begin recording based on your DVR's settings. Refer to your DVR's manual for specific recording, playback, and remote viewinstructions.
Détection de mouvement :
Many HD-TVI DVRs support motion detection features. Configure these settings within your DVR's interface to receive alerts or trigger recordings when motion is detected in the camera's field of view.


Entretien
Regular maintenance ensures the longevity and optimal performance of your surveillance camera.
- Nettoyage: Nettoyez régulièrement l'objectif et le boîtier de l'appareil photo avec un chiffon doux et sec.amp Chiffon. Évitez les nettoyants abrasifs qui pourraient rayer la lentille.
- Inspection des câbles : Regularly check all cables for signs of wear, damage, or loose connections.
- Protection de l'environnement : Bien que la caméra soit résistante aux intempéries (IP66), assurez-vous qu'elle ne soit pas immergée dans l'eau ni exposée à des chocs physiques extrêmes.
Dépannage
Si vous rencontrez des problèmes avec votre appareil photo, reportez-vous aux étapes de dépannage courantes suivantes :
| Problème | Cause possible | Solution |
|---|---|---|
| Aucune image sur le moniteur | Loose cable connection, no power, incompatible DVR. | Check BNC and power connections. Ensure power supply is working. Verify DVR is HD-TVI compatible. |
| Mauvaise qualité d'image | Dirty lens, improper focus (if adjustable), cable interference, low light. | Clean the lens. Ensure cables are not near strong electrical interference. Check night vision functionality in low light. |
| La vision nocturne ne fonctionne pas | Insufficient power, IR LEDs malfunction, ambient light interference. | Ensure adequate power supply. Check for strong light sources near the camera that might prevent IR activation. |
| La caméra n'enregistre pas | DVR settings, hard drive issues, motion detection not configured. | Refer to your DVR's manual to check recording schedules, motion detection settings, and hard drive status. |
Caractéristiques
Detailed technical specifications for the Anlapus 1080P TVI Outdoor Surveillance Camera.
- Nom du modèle : C1062B Surveillance Camera
- Numéro de modèle : 6972804072672
- Résolution: 1080p (1920x1080)
- Lentille: 3.6 mm
- ViewAngle d'attaque : 90 degrés
- Gamme de vision nocturne 24 mètres (80 pieds)
- LED IR: 24 pcs IR-Cut LEDs
- Cote de résistance aux intempéries: IP66
- Connectivité : Câblé (BNC)
- Appareils compatibles : HD-TVI DVRs
- Source d'alimentation : Câble électrique (12 V CC)
- Consommation d'énergie : 6 watts
- Matériel: Boîtier en métal
- Température de fonctionnement : (Not specified, but implied by outdoor use)
- Dimensions: 42.9 x 27 x 8.7 cm (Product dimensions for the kit)
- Poids: 2.66 Kilograms (Product weight for the kit)
- Méthode de contrôle : Remote control (via DVR)
- Type d'alerte: Motion only (configurable via DVR)
- Fréquence d'images : 25 images par seconde
- Technologie de capteur optique : CMOS
Garantie et assistance
Anlapus is committed to providing high-quality products and customer satisfaction. For any technical assistance, warranty claims, or product-related inquiries, please contact Anlapus customer support.
Veuillez conserver votre preuve d'achat pour faire valoir la garantie. Les conditions de garantie peuvent varier selon la région et le détaillant.
