LMP LED Square Up and Down Outdoor Wall Light (Model ZY-B1046C) Instruction Manual

1. Introduction

Thank you for choosing the LMP LED Square Up and Down Outdoor Wall Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.

This modern outdoor wall light is designed to provide efficient and stylish illumination for various outdoor spaces, including patios, porches, garages, and balconies. Its durable, waterproof aluminum construction ensures longevity and reliable performance in diverse weather conditions.

2. Consignes de sécurité

• AVERTISSEMENT: Risque de choc électrique. Coupez l'alimentation au niveau du tableau électrique ou du disjoncteur avant toute installation ou intervention.
• Tous les raccordements électriques doivent être conformes aux codes et règlements locaux, ainsi qu'au Code national de l'électricité (NEC). Consultez un électricien qualifié si vous n'êtes pas familiarisé avec les raccordements électriques appropriés.
• Assurez-vous que le dispositif est solidement fixé sur une surface structurellement saine.
• Do not handle the fixture or attempt installation while power is connected.
• This fixture is rated for 110V-240V input. Ensure your power supply matches this requirement.
• Ne tentez pas de modifier le dispositif. Toute modification pourrait annuler la garantie et présenter un risque pour la sécurité.

3. Contenu du colis

Vérifiez que tous les composants sont présents avant de commencer l'installation :

• LMP LED Square Up and Down Outdoor Wall Light fixture (2 units for 2-pack model)
• GU10 LED bulbs (2 per fixture, pre-installed or included)
• Mounting hardware (screws, wire nuts, mounting plate)
• Manuel d'instructions

4. Spécifications

5. Configuration et installation

This light fixture is designed for easy installation. Follow these steps carefully:

1. Éteignez l'alimentation : Before starting, ensure the power supply to the installation area is completely disconnected at the circuit breaker or fuse box.
2. Prepare the mounting plate: Attach the provided mounting plate to your standard J-box on the wall. Ensure it is level and securely fastened.
3. Connectez les fils : Connect the fixture's wires to your household wiring using the provided wire nuts. Typically, connect the black wire from the fixture to the black (live) wire from the wall, the white wire from the fixture to the white (neutral) wire from the wall, and the green/yellow (ground) wire from the fixture to the bare copper (ground) wire from the wall.
4. Mount the fixture: Align the fixture with the mounting plate and secure it using the provided screws. Ensure a tight fit to prevent moisture ingress.
5. Install GU10 bulbs: If not pre-installed, insert the GU10 bulbs into their sockets by pushing them in and twisting clockwise until secure.
6. Rétablir le courant : Une fois le luminaire solidement installé et tous les branchements effectués, rétablissez le courant au niveau du disjoncteur.

Pour un guide visuel, veuillez consulter la vidéo d'installation ci-dessous :

Image: Visual representation of the installation process, including securing the mounting plate and attaching the fixture.

6. Mode d'emploi

This LMP LED Square Up and Down Outdoor Wall Light operates by a standard wall switch. Simply toggle your wall switch to turn the light fixture ON or OFF.

Note: This specific model (ZY-B1046C) does pas feature a dusk-to-dawn sensor. If you require automatic light sensing, please ensure you have purchased a model explicitly stating 'Dusk to Dawn' functionality.

Image: The LMP wall light casting warm light upwards and downwards on a textured brick wall.

7. Entretien

• Nettoyage: To maintain the appearance and performance of your fixture, clean it regularly with a soft, damp Chiffon. N’utilisez pas de nettoyants abrasifs ni de solvants, car ils pourraient endommager la finition.
• Remplacement de l'ampoule : The fixture uses GU10 LED bulbs. While designed for long life (average 25,000 hours), bulbs may eventually need replacement. To replace a bulb, first, disconnect power to the fixture. Carefully remove the top or bottom cover (depending on the bulb location) and twist the old GU10 bulb counter-clockwise to remove. Insert the new GU10 bulb by pushing it in and twisting clockwise until secure. Reattach the cover and restore power.
• Inspection: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Address any issues promptly to ensure safe operation.

8. Dépannage

9. Garantie et assistance

LMP fournit un Garantie de 2 ans for this LED Square Up and Down Outdoor Wall Light, guaranteeing against defects in materials and workmanship under normal use. This warranty covers repair or replacement of the product.

For warranty claims, technical support, or any questions regarding your LMP product, please do not hesitate to contact our customer service team. We are committed to resolving any issues as quickly as possible.

Coordonnées: Please refer to the contact details provided on your purchase receipt or the LMP official website.

10. Caractéristiques du produitview

Image: Key features of the LMP wall light, highlighting the mounting plate, aluminum body, and included GU10 bulbs.

Image: Durability features of the LMP wall light, including waterproof, heat-resistance, storm-resistance, and snow-protection.