Godox TT350N Speedlite Flash for Nikon DSLR Cameras User Manual

1. Introduction

Merci pour votre achatasing the Godox TT350N Speedlite Flash. This compact and versatile flash unit is designed for Nikon DSLR cameras, offering full TTL functionality, high-speed sync, and a built-in 2.4G wireless X system. This manual provides detailed instructions for proper operation and maintenance to ensure optimal performance.

2. Consignes de sécurité

• Gardez toujours ce produit au sec. Ne pas utiliser sous la pluie ou damp conditions.
• Do not disassemble. If repairs become necessary, this product must be sent to an authorized maintenance center.
• Tenir hors de portée des enfants.
• N’utilisez pas le flash en présence de gaz inflammables, de produits chimiques ou d’autres matériaux.
• Do not touch the flash head immediately after use, as it may be hot.
• Use only AA batteries as specified. Do not mix new and old batteries or different types of batteries.

3. Produit terminéview

3.1 Principales caractéristiques

• Fonctionnalités TTL complètes : Supports HSS (up to 1/8000s), FEC, front and rear curtain sync, multi-flash, and manual flash.
• Dot-Matrix LCD: Provides clear and simple operation with an intuitive display.
• Fonctions puissantes : Includes TTL autoflash, 1/8000 high-speed synchronization, flash exposure compensation, flash exposure lock, and modeling flash.
• Wireless Grouping System: Features a 2.4G wireless system with up to 5 groups and 32 channels to meet various shooting requirements.
• Protection contre la surchauffe : Designed with protection against overheating for extended use.
• Performance efficace : Guide Number (GN) of 36 (m ISO 100, @ 105mm), 22 power outputs (1/1-1/128). Recycling time between 0.1 and 2.2 seconds, providing approximately 210 full power flashes with 2500mA Ni-MH batteries.
• Fonction de zoom: Automatic and manual zoom from 24mm to 105mm.
• Personal Function Settings (C.Fn): Customizable settings for personalized operation.
• Large compatibilité: Can act as a master unit to control other Godox slave units (AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, TT600) or as a slave unit triggered by Godox master units (X1T-N, V860IIN, V850II, TT685N, TT600).

3.2 Contenu du paquet

• 1 x Godox TT350N Flash Unit
• 1 x Mini support
• 1 x étui de protection
• 1 filtres de couleur
• 1 x Manuel d'utilisation
• 1 x VFOTO Lens Cleaning Cloth

Image: The Godox TT350N flash unit, mini stand, protective case, color filter, user manual, and lens cleaning cloth are included in the package.

3.3 Noms et fonctions des pièces

Image: Detailed diagram showing the various parts of the Godox TT350N flash and their corresponding functions.

1. Bouton de sélection du zoom
2. Bouton de sélection de mode
3. Custom Function Setting Button (reusable button, long press for 2 seconds)
4. Bouton Test/Indicateur Flash Prêt
5. Panneau LCD
6. Bouton de synchronisation haute vitesse
7. S1/S2 Optic Slave Triggering Selection Button (in non-wireless mode)
8. Group/Channel Button (reusable button, in wireless mode)
9. Interrupteur d'alimentation
10. Bague de verrouillage
11. Bouton de sélection sans fil (bouton réutilisable, appui long pendant 2 secondes)
12. Chaussure
13. Bouton de réglage
14. Sélectionnez le numéro
15. Compartiment à piles
16. Capteur de contrôle optique
17. Faisceau d'assistance à la mise au point
18. Tête de flash
19. Panneau Catchlight
20. Panneau large intégré

4. Installation

4.1 Installation de la batterie

The Godox TT350N uses two AA batteries. Ni-MH batteries are recommended for optimal performance and recycling time. Alkaline batteries (LR6) can also be used.

1. Ouvrez le couvercle du compartiment à piles situé sur le côté du flash.
2. Insérez deux piles AA en respectant les indicateurs de polarité (+/-) à l'intérieur du compartiment.
3. Fermez soigneusement le couvercle du compartiment à piles.

4.2 Montage sur la caméra

To mount the flash unit onto your camera's hotshoe:

1. Loosen the lock ring on the flash unit by turning it counter-clockwise.
2. Slide the flash's hotshoe fully into your camera's hotshoe mount.
3. Tighten the lock ring by turning it clockwise until the flash is securely attached to the camera.

Image: The Godox TT350N flash unit showing its hotshoe for mounting onto a camera.

4.3 Mise sous/hors tension

• To power on, slide the Power Switch to the 'ON' position. The flash will begin charging, and the red flash ready indicator will light up when ready.
• Pour éteindre l'appareil, faites glisser l'interrupteur d'alimentation sur la position « ARRÊT ».

5. Modes de fonctionnement

The TT350N offers various flash modes to suit different shooting scenarios. Press the MODE bouton permettant de parcourir les modes disponibles.

5.1 Mode flash automatique TTL

In TTL mode, the flash output is automatically adjusted by the camera to achieve correct exposure. This mode is ideal for quick shooting and changing light conditions.

• Appuyez sur le MODE button until 'TTL' is displayed on the LCD panel.
• The flash will automatically adjust its output based on the camera's metering.

5.2 Manual Flash Mode (M)

Manual mode allows you to set the flash output power manually from 1/1 (full power) to 1/128 in 1/3 stop increments. This provides precise control over lighting.

• Appuyez sur le MODE button until 'M' is displayed.
• Tournez le Sélectionnez le numéro to adjust the flash output power.

5.3 Multi Flash Mode (Multi)

Multi flash mode (stroboscopic flash) fires a series of rapid flashes during a single exposure, creating multiple images of a moving subject in one frame.

• Appuyez sur le MODE Appuyez sur le bouton jusqu'à ce que « Multi » s'affiche.
• Utilisez le Sélectionnez le numéro et ENSEMBLE button to adjust the flash frequency (Hz), number of flashes, and flash output.

5.4 Synchronisation haute vitesse (HSS)

High-Speed Sync allows the flash to synchronize with all camera shutter speeds, up to 1/8000s. This is useful for shooting with wide apertures in bright conditions or freezing fast motion.

• Appuyez sur le SYNCHRONISATION button to activate HSS. The HSS icon will appear on the LCD.

5.5 Synchronisation premier/deuxième rideau

First curtain sync fires the flash at the beginning of the exposure. Second curtain sync fires the flash just before the shutter closes, creating a trail of light behind moving subjects.

• These settings are typically controlled via your camera's flash menu. Refer to your camera's manual for specific instructions.

5.6 Compensation d'exposition au flash (FEC)

FEC allows you to fine-tune the flash output in TTL mode, making the flash brighter or darker by up to ±3 stops in 1/3 stop increments.

• En mode TTL, appuyez sur ENSEMBLE button. The FEC value will blink.
• Tournez le Sélectionnez le numéro to adjust the FEC value.
• Appuyez sur le ENSEMBLE Appuyez à nouveau sur le bouton pour confirmer.

5.7 Modeling Flash

The modeling flash fires a brief burst of light to help you preview the lighting effect before taking the actual shot.

• Press the camera's depth-of-field preview button (if available) to activate the modeling flash.

6. Wireless Flash Function

The TT350N supports both 2.4G wireless transmission and optical transmission for off-camera flash control.

6.1 2.4G Wireless Transmission (Master/Slave)

The built-in Godox 2.4G wireless X system allows the TT350N to function as a master or slave unit, controlling or being controlled by other compatible Godox flashes and triggers.

Image: Illustration of the TT350N operating as both a master and slave unit within the Godox 2.4G wireless system.

• Unité principale : Le TT350N peut contrôler d'autres unités esclaves Godox telles que AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N et TT600.
• Unité esclave : The TT350N can be controlled by Godox master units like X1T-N, V860IIN, V850II, TT685N, and TT600.
• To activate wireless mode, long press the GR/CH button (Wireless Selection Button) for 2 seconds.
• Utilisez le GR/CH bouton et Sélectionnez le numéro to set the group (A, B, C) and channel (1-16).
• Assurez-vous que tous les appareils sont configurés sur le même canal et dans le même groupe pour une communication correcte.

6.2 Optical Transmission (S1/S2 Slave)

The TT350N can also function as an optical slave, triggered by another flash unit's light pulse.

• Mode S1 : The flash will fire in response to the first flash from a master flash. This mode is suitable for manual flash environments.
• Mode S2 : The flash will ignore the pre-flash from a master TTL flash and fire in response to the second flash. This mode is suitable for TTL master flashes.
• To activate S1 or S2 mode, press the ESCLAVE button (S1/S2 Optic Slave Triggering Selection Button) until 'S1' or 'S2' is displayed.

7. C.Fn Custom Functions

The TT350N features customizable functions (C.Fn) that allow you to tailor the flash's behavior to your preferences.

• Appuyez longuement sur le C.Fn button for 2 seconds to enter the custom function settings menu.
• Utilisez le Sélectionnez le numéro to navigate through the available functions.
• Appuyez sur le ENSEMBLE button to select a function and then use the Sélectionnez le numéro pour changer sa valeur.
• Appuyez sur le ENSEMBLE button again to confirm the change.
• Appuyez longuement sur le C.Fn button again to exit the custom function settings.

8. Entretien

• Nettoyez régulièrement le flash avec un chiffon doux et sec. Évitez d'utiliser des solvants ou des produits chimiques agressifs.
• Remove batteries when the flash is not in use for an extended period to prevent leakage.
• Rangez le flash dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.
• Évitez les chocs violents ou de laisser tomber l'appareil.

9. Dépannage

• Le flash ne se déclenche pas : Check battery level, ensure flash is securely mounted, verify camera flash settings, and confirm flash is powered on and ready.
• Flash output is too dark/bright: Adjust FEC (Flash Exposure Compensation) in TTL mode or manual power output in M mode. Check camera ISO and aperture settings.
• Problèmes de déclenchement sans fil : Ensure master and slave units are on the same channel and group. Check distance and line of sight for optical triggering. Verify battery levels in all units.
• Flash head does not rotate/tilt smoothly: Do not force movement. If resistance is felt, check for obstructions or contact customer support.

10. Spécifications

11. Garantie et assistance

Godox products are manufactured to high standards and are guaranteed against manufacturing defects. For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official Godox webVeuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.