Natec TURBOT Wireless Keyboard with Touchpad (NKL-0968) - Instruction Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Natec TURBOT Wireless Keyboard with Touchpad (model NKL-0968). This device is designed to enhance your experience with Smart TVs, cellphones, and other compatible devices, offering convenient wireless control via 2.4 GHz technology.

Veuillez lire attentivement ce manuel avant d'utiliser le produit afin d'assurer son bon fonctionnement et d'éviter tout dommage.

2. Contenu du colis

Vérifiez que tous les éléments sont présents dans le colis :

• Natec TURBOT Wireless Keyboard with Touchpad
• Récepteur USB 2.4 GHz
• Manuel de l'utilisateur (ce document)
• (Note: 2 AAA batteries are required and may not be included)

3. Guide de configuration

3.1. Installation de la batterie

The Natec TURBOT keyboard requires two (2) AAA batteries for operation. Locate the battery compartment on the underside of the keyboard. Open the cover, insert the batteries according to the polarity markings (+/-), and close the cover securely.

3.2. Connexion du récepteur USB

The USB 2.4 GHz receiver is typically stored in a dedicated compartment on the keyboard itself for safekeeping. Carefully remove the receiver from its storage slot.

Figure 1: USB receiver stored in the keyboard compartment.

Insert the USB receiver into an available USB port on your Smart TV, computer, or other compatible device. The device should automatically detect and install the necessary drivers.

3.3. Mise sous tension du clavier

Locate the power switch on the side of the keyboard. Slide the switch to the "ON" position. The keyboard should now be ready for use.

Figure 2: Power switch on the keyboard.

4. Mode d'emploi

4.1. Fonctions du clavier

Figure 3: Natec TURBOT Wireless Keyboard Layout.

The keyboard features a standard QWERTY layout for typing. It also includes dedicated function keys (F1-F12) which may have secondary multimedia functions (e.g., volume control, media playback). These secondary functions are often accessed by holding down the Fn key and pressing the corresponding function key.

• Verrouillage des majuscules: Toggles uppercase/lowercase letters.
• Changement: Used for uppercase letters and secondary symbols.
• Ctrl / Alt / Win: Standard modifier keys for various shortcuts depending on the operating system.
• Rétroéclairage: The keyboard features a backlight for improved visibility in low-light conditions. Refer to your device's operating system or the keyboard's specific function key combinations (often involving the Fn key) to activate or adjust the backlight.

4.2. Fonctions du pavé tactile

Figure 4: Integrated Touchpad.

The integrated touchpad allows for mouse-like navigation. It supports various gestures:

• Tap à un seul doigt: Functions as a left-click.
• Robinet à deux doigts: Functions as a right-click.
• Défilement à deux doigts: Drag two fingers up or down to scroll through content.
• Boutons physiques: Below the touchpad, there are two physical buttons. The left button acts as a left-click, and the right button acts as a right-click.

Touchpad sensitivity and other settings may be adjustable through your connected device's operating system settings.

5. Entretien

• Nettoyage: Use a soft, dry cloth to clean the keyboard and touchpad. For stubborn dirt, a slightly damp cloth with mild cleaning solution can be used, ensuring no liquid enters the device.
• Remplacement de la batterie: Replace batteries when the keyboard's performance degrades or it stops responding. Always use fresh AAA batteries.
• Stockage: When not in use for extended periods, turn off the keyboard to conserve battery life. Store the USB receiver in its designated compartment to prevent loss.
• Évitez les conditions extrêmes: Do not expose the keyboard to extreme temperatures, direct sunlight, or high humidity.

6. Dépannage

6.1. Le clavier ne répond pas

• Assurez-vous que le clavier est sous tension.
• Vérifiez que les piles sont correctement installées et suffisamment chargées. Remplacez-les si nécessaire.
• Vérifiez que le récepteur USB est correctement branché sur un port USB fonctionnel de votre appareil.
• Essayez de brancher le récepteur USB sur un autre port USB.
• Restart your connected device (Smart TV, computer, etc.).

6.2. Le pavé tactile ne fonctionne pas.

• Vérifiez que le clavier est allumé et connecté.
• Clean the touchpad surface to remove any dirt or obstructions.
• Check your device's settings for any touchpad-related configurations.

6.3. Connexion intermittente

• Ensure there are no large metallic objects or other 2.4 GHz wireless devices causing interference between the keyboard and the USB receiver.
• Rapprochez le clavier du récepteur USB.

7. Spécifications

8. Garantie et assistance

For warranty information, technical support, or further assistance, please refer to the official Natec webConsultez leur site web ou contactez leur service client. Conservez votre reçu d'achat pour toute réclamation au titre de la garantie.

Natec does not provide specific information regarding spare parts availability or software updates beyond the initial purchase.