Introduction
The Henry Xtra 160 HVX160 is a versatile and powerful canister vacuum cleaner designed for efficient cleaning of various surfaces. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Henry Xtra 160 vacuum.
Figure 1: The NaceCare Henry Xtra 160 Canister Vacuum with hose and floor tool.
Caractéristiques principales :
- Powerful 680 watt motor (0.9 HP) for strong suction.
- Includes Turbo Brush for effective carpet cleaning and hair pickup.
- Specialist hard-floor tool for optimal performance on hard surfaces.
- MicroTex filters provide 99.97% filtration down to 0.3 micron for improved air quality.
- Large 1.6 gallon capacity for extended cleaning sessions.
- Whisper quiet operation, suitable for various environments.
- Self-seal tab on bags for dust-free emptying.
- Convenient on-board accessory storage.
Informations importantes sur la sécurité
Always read and understand all safety warnings and instructions before using the appliance. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- N'utilisez pas l'appareil si le cordon d'alimentation ou la fiche est endommagé.
- Ne pas aspirer de liquides inflammables ou combustibles, tels que de l'essence, ni les utiliser dans des zones où ils peuvent être présents.
- Ne ramassez rien qui brûle ou qui fume, comme des cigarettes, des allumettes ou des cendres chaudes.
- Ne laissez pas les enfants utiliser l'aspirateur.
- Débranchez toujours l'aspirateur avant d'effectuer toute opération d'entretien ou de nettoyage.
- Vérifiez que tous les filtres sont correctement installés avant utilisation.
Configuration et assemblage
1. Déballage :
Carefully remove all components from the packaging. Retain packaging for future storage or transport. Verify that all parts listed in the "What's in the Box" section are present.
2. Fixation du tuyau :
- Locate the flexible hose.
- Insert the hose cuff into the suction inlet on the front of the vacuum unit until it clicks securely into place.
3. Assembling the Wand and Floor Tool:
- Connect the two chrome wand sections together.
- Attach the curved handpiece to the top of the assembled wand.
- Select the desired floor tool (Turbo Brush for carpets or hard-floor tool for hard surfaces).
- Attach the chosen floor tool to the bottom of the assembled wand.
- Insert the curved handpiece into the end of the flexible hose.
Figure 2: The Henry Xtra 160 vacuum shown with its comprehensive accessory kit, including hose, wands, and various floor tools.
4. Installing the Dust Bag:
The Henry Xtra 160 uses disposable dust bags. Ensure a bag is correctly installed before operation.
- Unclip and remove the motor head from the canister.
- Ensure the MicroTex filter is properly seated.
- Slide the cardboard collar of a new dust bag onto the inlet tube inside the canister. Ensure the bag is fully open and positioned correctly within the canister.
- Replace the motor head, ensuring it is securely clipped.
Opération
1. Mise sous/hors tension :
Plug the power cord into a suitable electrical outlet. The Henry Xtra 160 features an automatic cord rewind system. To operate, press the red ON/OFF switch located on the top of the motor head.
2. Using the Floor Tools:
- Brosse turbo: Ideal for carpets and picking up pet hair. The air-driven brush agitates carpet fibers for deeper cleaning.
- Hard-Floor Tool: Designed for optimal suction and maneuverability on hard surfaces such as wood, tile, and laminate.
Figure 3: The Henry Xtra 160's Turbo Brush effectively cleaning a carpeted surface.
Figure 4: The Henry Xtra 160's hard-floor tool efficiently cleaning debris from a tiled floor.
3. Utilisation des accessoires :
The Henry Xtra 160 comes with a variety of accessories for different cleaning tasks. These can be attached directly to the curved handpiece or the wand.
- Suceur plat : Pour les espaces étroits, les coins et les bords.
- Brosse à épousseter : For delicate surfaces, shelves, and upholstery.
- Buse pour rembourrage : For furniture and fabric surfaces.
Entretien
Regular maintenance ensures optimal performance and extends the life of your Henry Xtra 160 vacuum.
1. Replacing the Dust Bag:
Replace the dust bag when it is full or when suction power noticeably decreases. The self-seal tab on the bag ensures dust-free disposal.
- Débranchez l’aspirateur de la prise de courant.
- Unclip and remove the motor head.
- Carefully pull the cardboard collar of the full dust bag off the inlet tube. Use the self-seal tab to close the bag opening.
- Jetez le sac plein de manière responsable.
- Install a new dust bag as described in the "Setup and Assembly" section.
- Remplacez la tête du moteur.
2. Nettoyage des filtres :
The MicroTex filter provides excellent filtration. Periodically check and clean the filter to maintain suction and air quality.
- Débranchez l'aspirateur.
- Retirez la tête du moteur.
- Gently remove the MicroTex filter.
- Tap the filter gently over a waste bin to dislodge dust. Do not wash the filter unless specified by the manufacturer.
- Reinstall the filter, ensuring it is correctly seated before replacing the motor head.
3. Cleaning the Turbo Brush:
Hair and debris can become tangled around the brush roll. Regularly inspect and clean the brush roll for optimal performance.
- Unplug the vacuum and detach the Turbo Brush from the wand.
- Using scissors, carefully cut away any tangled hair or threads from the brush roll.
- Retirez les débris.
4. Nettoyage général :
Essuyez l'extérieur de l'aspirateur avec adamp chiffon. N'utilisez pas de nettoyants abrasifs ou de solvants.
Dépannage
If you encounter issues with your Henry Xtra 160, refer to the table below for common problems and their solutions.
| Problème | Cause possible | Solution |
|---|---|---|
| L'aspirateur ne s'allume pas. | Pas d'alimentation électrique. Couper l'alimentation. | Vérifiez que la fiche est bien branchée dans la prise. Ensure the ON/OFF switch is pressed. Vérifiez le fusible/disjoncteur de votre installation électrique. |
| Perte d'aspiration. | Sac à poussière complet. Clogged hose/wand/tool. Filtre sale. | Remplacez le sac à poussière. Check and clear any blockages in the hose, wand, or floor tool. Clean or replace the MicroTex filter. |
| Bruit inhabituel pendant le fonctionnement. | Obstruction in brush roll (Turbo Brush). Composant lâche. | Inspect and clear any debris from the Turbo Brush roll. Ensure all attachments and the motor head are securely fitted. |
| Poussière s'échappant de l'aspirateur. | Sac à poussière mal installé ou endommagé. Filtre mal installé. | Check dust bag installation; replace if damaged. Ensure MicroTex filter is correctly and securely in place. |
Caractéristiques
- Modèle: 908423
- Marque: Numatique
- Fabricant: NaceCare
- Dimensions du produit : 19 x 22 x 16 pouces
- Poids de l'article : 18 livres
- Puissance du moteur : 680 watts (0.9 HP)
- Type de filtre : HEPA Filter (MicroTex)
- Composants inclus : Accessory Kit (Hose, Wands, Turbo Brush, Hard-Floor Tool, Crevice Tool, Dusting Brush, Upholstery Nozzle)
- Dossier spécial : Rembobinage automatique du cordon
- Sans fil: Non
Garantie et assistance
Informations sur la garantie :
For specific warranty details, please refer to the warranty card included with your product or contact NaceCare customer service. Keep your proof of purchase for warranty claims.
Assistance clientèle :
If you require further assistance or have questions not covered in this manual, please contact NaceCare customer support. Contact information can typically be found on the manufacturer's website ou sur l'emballage du produit.