Poussette Peg Perego Ypsi - Manuel d'instructions

Introduction

This manual provides essential information for the safe and effective use of your Peg Perego Ypsi Stroller. Please read it thoroughly before assembly, operation, or maintenance. Keep this manual for future reference.

Consignes de sécurité

Always prioritize safety. Follow all warnings and instructions to prevent injury or damage. Ensure all components are securely fastened before use.

• Ne laissez pas les enfants sans surveillance dans la poussette.
• Ensure the parking brake is engaged when placing or removing a child.
• Ne surchargez pas le panier de rangement.
• Regularly inspect the stroller for loose parts or damage.

Produit terminéview

The Peg Perego Ypsi Stroller is a versatile and compact solution designed for modern families. It transitions seamlessly from a single to a double stroller with optional accessories, offering agility and ease of use in various environments.

Figure 1 : Face avant view of the Peg Perego Ypsi Stroller.

• Conception compacte : Measures just 20 inches wide for easy maneuverability.
• Convertible: Easily converts from a single to a double stroller with Ypsi Double Adapters and Companion Seat (sold separately).
• Conduite en douceur : Features a suspension system and 12 ball bearings for effortless pushing.
• Siège réversible : Stroller seat can be reversed and adjusted to three positions (sitting, relaxing, resting).
• Travel System Compatible: Docks directly with Primo Viaggio 4-35 Nido & Primo Viaggio 4-35 Lounge car seats (sold separately).

Installation

Dépliage de la poussette

1. Placez la poussette pliée sur une surface plane.
2. Release the folding latch, typically located on the side of the frame.
3. Soulevez fermement le guidon jusqu'à ce que le cadre se verrouille en place avec un clic audible.
4. Assurez-vous que tous les mécanismes de verrouillage sont enclenchés avant d'installer un enfant dans la poussette.

Figure 2: The Ypsi Stroller in its compact folded state.

Attaching the Seat Unit

1. Align the seat unit's connectors with the corresponding slots on the stroller frame.
2. Press down firmly until the seat clicks securely into place. Verify the connection by gently pulling upwards on the seat.
3. To reverse the seat, locate the release buttons on either side of the seat unit, press them, lift the seat, and reattach it facing the desired direction.

Figure 3: The Ypsi Stroller with the seat unit attached and facing forward.

Figure 4: The Ypsi Stroller with the seat unit attached and facing the parent.

Attaching a Car Seat or Bassinet (Sold Separately)

The Ypsi stroller is compatible with Primo Viaggio 4-35 Nido and Primo Viaggio 4-35 Lounge car seats, as well as Ypsi bassinets. Ensure you have the correct Primo Viaggio Links (included with stroller) for car seat attachment.

1. Remove the stroller seat unit.
2. Align the car seat or bassinet with the stroller frame's attachment points.
3. Press down until it clicks securely into place. Always double-check the connection.

Figure 5: The Ypsi Stroller configured with a compatible car seat.

Figure 6: The Ypsi Stroller configured with a compatible bassinet.

Utilisation de la poussette

Réglage du guidon

The telescoping handle can be adjusted to accommodate users of different heights. Locate the adjustment buttons on the sides of the handlebar and press them to extend or retract the handle to a comfortable position.

Figure 7: Detail of the adjustable handlebar for ergonomic pushing.

Engaging and Releasing the Brake

The parking brake is located near the rear wheels. Press down on the brake pedal to engage it, ensuring the stroller is stationary. Lift the pedal to release the brake. Always engage the brake when the stroller is not in motion, especially when placing or removing a child.

Réglage de l'inclinaison du siège

The seat offers three adjustable recline positions: sitting, relaxing, and resting. Locate the recline lever or buttons on the back of the seat unit and adjust to the desired angle.

Converting to a Double Stroller (Optional)

To convert your Ypsi into a double stroller, you will need the Ypsi Double Adapters and Companion Seat (both sold separately). Follow the instructions provided with these accessories for proper installation.

Figure 8: Multiple configurations possible with the Ypsi Double Adapters.

Entretien

Instructions de nettoyage

• Pièces en tissu : Nettoyer avec une annonceamp Nettoyer avec un chiffon et du savon doux. Ne pas utiliser de détergents agressifs ni d'eau de Javel. Laisser sécher complètement à l'air libre.
• Cadre: Wipe the aluminum and plastic parts with a soft, damp tissu.
• Roues: Nettoyez régulièrement les roues et les essieux de la saleté et des débris pour assurer un bon fonctionnement.

Stockage

Store the stroller in a dry, cool place away from direct sunlight and extreme temperatures. Ensure it is clean and dry before storing to prevent mold or mildew.

Dépannage

Caractéristiques

• Dimensions du produit : 39.25 x 20 x 40.25 pouces
• Numéro de modèle de l'article : IP1528NA00BA36
• Recommandation de poids maximum: 50 livres
• Type de matériau: Leather (handlebar), 80% aluminum, 10% plastic, 10% polyester (frame and fabric)
• Poids de l'article : 22.5 livres
• Origine: Fabriqué en Italie

Garantie et assistance

For warranty information and customer support, please refer to the official Peg Perego webConsultez leur site web ou contactez leur service client. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.

Des ressources supplémentaires peuvent être disponibles sur le Boutique Peg Perego sur Amazon.

A PDF version of the Instructions for Use (IFU) is also available: Instructions d'utilisation (PDF).