1. Produit terminéview
The BAL Drive Recorder Mirror Model 5600 is a high-performance dash camera designed to provide comprehensive front and rear recording for your vehicle. It integrates seamlessly into your car as a rearview mirror, offering a wide and clear view of the road ahead and behind. Equipped with advanced features like GPS, WDR, and G-sensor, it ensures reliable recording and enhanced safety on your journeys.
Figure 1 : Face avant view of the BAL Drive Recorder Mirror.
This device is compatible with both 12V and 24V vehicle electrical systems. Its full-screen 9.7-inch IPS LCD touch panel provides intuitive control and a vivid display. The front and rear cameras both capture footage in high-definition 2-megapixel resolution, ensuring clear and detailed recordings.
2. Contenu du colis
Veuillez vérifier que tous les éléments énumérés ci-dessous sont inclus dans votre colis :
- BAL Drive Recorder Mirror Main Unit
- Rear Camera (Waterproof and Dustproof, IEC standard IP65 compliant)
- Rear Camera Cable (7 meters)
- Power Cable (for 12V/24V vehicle power outlet)
- Antenne GPS
- Mounting Straps/Adhesive Mounts
- 16GB Class 10 microSD Card (pre-inserted in main unit)
- Manuel de l'utilisateur (ce document)
Figure 2 : Emballage du produit et accessoires inclus.
3. caractéristiques du produit
- Dual Full HD Recording: Simultaneous 2-megapixel recording from both front and rear cameras.
- Large plage dynamique (WDR) : Enhances video quality in varying light conditions, ensuring clear footagmême la nuit.
- GPS intégré : Records vehicle location and speed data along with video footage.
- Capteur G : Automatically detects impacts and locks the current recording to prevent overwriting.
- Parking Surveillance Mode: Monitors your vehicle for impacts while parked, providing security.
- 9.7-inch IPS Touch Panel: Large, clear, and responsive display for easy operation and viewing.
- Fonctionnalités de la caméra arrière : Waterproof and dustproof rear camera (IP65) can be linked with reverse gear for use as a rear monitor.
- LED Signal Compatible: Ensures stable recording even with different LED signal frequencies (East/West Japan).
- Objectif réglable : The front camera lens can be horizontally extended and adjusted vertically/horizontally for optimal positioning.
4. Configuration et installation
4.1. Device Components and Ports
Familiarize yourself with the main unit's layout and connection points:
Figure 3 : Arrière view of the main unit, indicating GPS, TF (microSD), AV-IN, and USB ports.
- Port GPS : Connect the external GPS antenna here.
- TF (microSD) Slot: Insert the provided 16GB Class 10 microSD card.
- Port AV-IN : Connect the rear camera cable here.
- Port USB : Pour le raccordement électrique et le transfert de données.
- Objectif de la caméra frontale : Located on the left side (when facing the mirror).
- Conférencier: For audio playback and alerts.
4.2. Étapes d'installation
- Insérez la carte microSD : Ensure the provided 16GB Class 10 microSD card is securely inserted into the TF slot on the main unit.
- Monter l'unité principale : Attach the drive recorder mirror over your existing rearview mirror using the included straps or adhesive mounts. Ensure it is securely fastened and does not obstruct your view.
- Connecter la caméra arrière :
- Route the 7-meter rear camera cable from the main unit to the desired mounting location for the rear camera (e.g., rear windshield or license plate area).
- Connect the rear camera to the AV-IN port on the main unit.
- Secure the rear camera in place. If connecting for reverse gear linkage, consult a professional for proper wiring to your vehicle's reverse light circuit.
- Connecter l'antenne GPS : Plug the GPS antenna into the dedicated GPS port on the main unit. Mount the antenna in a location with a clear view of the sky, typically on the dashboard or near the windshield.
- Connecter l'alimentation : Plug the power cable into the USB port on the main unit and connect the other end to your vehicle's 12V/24V power outlet (cigarette lighter socket). Route the cable neatly to avoid interference with driving.
- Régler l'objectif : The front camera lens can be pulled out horizontally and adjusted vertically or horizontally to capture the optimal view of the road. Adjust it to ensure the road ahead is centered in the recording frame.
Figure 4: Attaching the drive recorder mirror to the existing rearview mirror using straps.
5. Mode d'emploi
5.1. Marche/Arrêt
The device will automatically power on and begin recording when your vehicle's ignition is turned on. It will power off automatically when the ignition is turned off.
5.2. Enregistrement de base
Upon powering on, the device enters continuous recording mode. Both front and rear cameras will record simultaneously. The recording status is indicated on the display.
5.3. Contrôle de l'affichage
- Commutation Views: Slide your finger left or right on the touch screen to quickly switch between front camera view, caméra arrière view, ou écran partagé view (if supported).
- Réglage ViewAngle d'attaque : Slide your finger up or down on the touch screen to adjust the vertical viewangle de vue du flux vidéo de la caméra affichée.
- Écran activé/désactivé : Tap the power button briefly to turn the display on or off while recording continues in the background.
Figure 5: The drive recorder mirror installed, providing a clear view de la route.
5.4. Fonctionnalité GPS
With the GPS antenna connected, the device will automatically record your vehicle's location and speed data along with the video footage. Ces données peuvent être viewed using the dedicated PC viewer software (not included, typically downloadable from manufacturer's webplacer).
5.5. Capteur G et enregistrement d'urgence
The built-in G-sensor detects sudden impacts or collisions. When an impact is detected, the device automatically triggers emergency recording, saving the current video segment to a protected folder on the microSD card, preventing it from being overwritten by continuous recording.
5.6. Mode de surveillance du stationnement
When the vehicle is parked and the ignition is off, the parking surveillance mode activates. If an impact is detected (e.g., a bump or collision), the device will automatically wake up and record a short video segment. This feature requires a continuous power supply or a dedicated hardwire kit (sold separately) to function when the vehicle is off.
5.7. Rear Monitor Function
If the rear camera is properly wired to your vehicle's reverse light circuit, the display will automatically switch to the full rear camera view when you engage reverse gear, assisting with parking maneuvers.
6. Entretien
- Nettoyage: Use a soft, dry cloth to clean the display and camera lenses. Do not use abrasive cleaners or solvents.
- microSD Card Management:
- Regularly format the microSD card (at least once a month) using the device's menu settings to ensure optimal performance and prevent data corruption.
- Replace the microSD card periodically (e.g., every 6-12 months) as continuous recording can wear out the card.
- Always power off the device before inserting or removing the microSD card to prevent data loss or card damage.
- Mises à jour du micrologiciel : Check the official BAL webConsultez régulièrement ce site pour vérifier les mises à jour du micrologiciel disponibles et vous assurer que votre appareil bénéficie des dernières fonctionnalités et corrections de bugs.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| L'appareil ne s'allume pas. | Absence d'alimentation électrique ; connexion desserrée ; câble d'alimentation défectueux. | Check power cable connection to device and vehicle outlet. Ensure vehicle ignition is on. Try a different power outlet. |
| L'enregistrement s'arrête ou footage est corrompu. | MicroSD card full; faulty microSD card; card speed too low. | Format the microSD card. Replace with a new Class 10 or higher microSD card. |
| Signal GPS non capté. | Antenne GPS non connectée ; antenne obstruée ; mauvaise réception satellite. | Assurez-vous que l'antenne GPS est correctement connectée et montée avec un ruban adhésif transparent. view du ciel. Déplacez le véhicule vers une zone dégagée. |
| La caméra arrière ne s'affiche pas. | Rear camera cable loose or damaged; faulty rear camera. | Check the connection of the rear camera cable to the main unit. Inspect the cable for damage. |
| Screen is dark or unclear at night. | WDR feature not enabled (if applicable); dirty lens. | Ensure WDR is enabled in settings. Clean camera lenses. |
8. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Marque | BAL |
| Nom du modèle | 5600 |
| Taille de l'écran | 9.7 inches (IPS LCD Touch Panel) |
| Effective Pixels (Front/Rear) | 2 Million Pixels (Full HD) |
| Support d'enregistrement | microSD Card (16GB Class 10 included) |
| Vol d'exploitationtage | DC12V / DC24V |
| Main Unit Dimensions (W×D×H) | Environ 257 mm × 19 mm × 73 mm |
| Rear Camera Dimensions (W×D×H) | Environ 24 mm × 34 mm × 24 mm |
| Longueur du câble de la caméra arrière | 7 mètres |
| Modes d'enregistrement | Continuous Recording, Emergency Recording, Parking Surveillance Mode |
| Caractéristiques spéciales | Built-in GPS, WDR, G-Sensor, LED Signal Compatible, Movable Lens |
| Type de montage | Adhesive (typically clip-on for mirror dash cams, but data states adhesive) |
| Méthode de contrôle | Écran tactile |
| Piles | Included / Required (Internal battery for parking mode) |
9. Garantie et assistance
For warranty information, please refer to the warranty card included with your product or visit the official BAL webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.
If you encounter any issues not covered in this manual or require further assistance, please contact BAL customer support through their official website ou les coordonnées fournies sur l'emballage du produit.
Official BAL Website: BAL Official Store on Amazon.co.jp