Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Pipishell Full Motion TV Monitor Wall Mount. Designed for optimal viewing flexibility, this mount supports 13-42 inch LED LCD flat and curved screen TVs and monitors weighing up to 44 lbs, with VESA mounting patterns up to 200x200mm. Its full motion capabilities allow for tilting, swiveling, extension, and rotation, enhancing your viewing experience and saving space.
Figure 1: Pipishell Full Motion TV Monitor Wall Mount Bracket.
Consignes de sécurité
Please read all instructions carefully before installation. Incorrect installation may result in property damage or personal injury. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer service.
- Assurez-vous que la surface de montage puisse supporter en toute sécurité le poids combiné du support et de l'écran.
- Do not mount on drywall alone. This mount requires installation into a single wood stud, solid concrete, or brick wall.
- Use all provided hardware. Do not use the concrete anchors for drywall installation.
- Always have at least two people for installation, especially when lifting the display.
- Tenir les enfants et les animaux domestiques éloignés pendant l’installation.
- Vérifiez régulièrement toutes les connexions pour vous assurer qu'elles restent sécurisées.
Figure 2: Illustration of compatible wall types for mounting: single wood stud, solid concrete, and brick wall. A crucial warning indicates that the mount should not be installed on drywall alone.
Contenu du colis
Before beginning installation, verify that all parts are present and undamaged. If any parts are missing or defective, contact Pipishell customer service.
Figure 3: All components included in the package: the wall plate, TV brackets, instruction manual, and various bags of screws, spacers, and anchors for different installation needs.
- Ensemble de plaque murale
- Supports TV (x4)
- Manuel d'instructions
- Assorted Screws, Washers, and Spacers for TV/Monitor attachment
- Lag Screws and Concrete Anchors for wall mounting
- Clés Allen
Caractéristiques
| Fonctionnalité | Spécification |
|---|---|
| Dimensions du produit | 9.61 x 6.22 x 2.4 pouces |
| Poids de l'article | 2.82 livres |
| Numéro de modèle de l'article | PISF1 |
| Type de montage | Support mural |
| Type de mouvement | Swivel, Tilt, Extension, Rotation |
| Matériel | Acier allié |
| Taille maximale compatible | 42 pouces |
| Taille minimale compatible | 13 pouces |
| Capacité de charge maximale | 44 livres |
| Max VESA Mounting Holes Spacing | 200 x 200 mm |
| Min VESA Mounting Holes Spacing | 75 x 75 mm |
| Angle d'inclinaison | +9°/-11° |
| Angle de pivotement | Up to 90° (depends on screen size) |
| Extension du mur | 2.7" à 14.59" |
| Rotation | 360° |
Figure 4: Detailed VESA mounting patterns supported by the mount, including 100x100mm, 75x75mm, 100x200mm, 200x100mm, and 200x200mm, along with screen size and max load capacity.
Configuration et installation
This section guides you through the process of securely mounting your TV or monitor. It is recommended to have assistance during installation.
1. Vérifier la compatibilité
Before starting, ensure your TV or monitor meets the following criteria:
- Taille de l'écran : Entre 13 et 42 pouces.
- Poids: Jusqu'à 44 lb (20 kg).
- Modèle VESA : Compatible with 75x75mm, 100x100mm, 100x200mm, 200x100mm, and 200x200mm.
2. Choisissez votre type de mur
Ce support est conçu pour être installé sur :
- Single Wood Stud
- Solid Concrete Wall
- Mur de briques
3. Installation Steps (Single-Stud Example)
The following steps outline a typical single-stud installation. Refer to the included instruction manual for detailed steps for all wall types.
- Step 1: Mount Wall Plate. Position the wall plate on your chosen wall location, ensuring it is level and aligned with a wood stud. Mark and drill pilot holes, then secure the wall plate using the appropriate lag screws.
- Step 2: Attach TV Brackets. Secure the TV brackets to the back of your TV or monitor using the correct screws and spacers from the hardware kit, matching your display's VESA pattern.
- Step 3: Hang TV. Carefully lift the TV with the attached brackets and hook them onto the wall plate assembly. Ensure the TV is securely seated and locked into place.
Figure 5: Visual guide for the three main steps of single-stud installation: mounting the wall plate, attaching TV brackets, and hanging the TV onto the mount.
Mode d'emploi
Your Pipishell Full Motion TV Mount offers various adjustments for optimal viewangles d'inclinaison.
- Réglage de l'inclinaison : The mount allows for a tilt range of +9° (upward) to -11° (downward) to reduce glare and achieve a comfortable viewing angle. Loosen the tilt bolts, adjust to the desired angle, and then re-tighten securely.
- Ajustement pivotant : Swivel your display up to 90° left or right, depending on your screen size, to direct the screen towards your seating position. Gently push or pull the display to the desired angle.
- Extension et rétraction : Extend the TV up to 14.59 inches from the wall for closer viewing or retract it back to 2.7 inches to save space when not in use.
- Rotation: Rotate the screen 360° to switch between landscape and portrait orientation. This feature is particularly useful for computer monitors.
Figure 6: Demonstrates the 360-degree rotation feature for changing screen orientation and the ±90-degree swivel capability for flexible viewangles d'inclinaison.
Figure 7: Illustrates the tilt function (+9°/-11°) to reduce glare and the extension/retraction feature (extends 14.59", retracts 2.7") for space-saving.
Entretien
Un entretien régulier garantit la longévité et le bon fonctionnement de votre support TV.
- Nettoyage: Essuyez le support avec un chiffon doux et sec. Évitez les nettoyants abrasifs ou les solvants qui pourraient endommager la finition.
- Vérifier les connexions : Periodically (e.g., every 6 months) check all screws and bolts to ensure they are tight and secure. Over time, vibrations or adjustments can cause fasteners to loosen.
- Lubrification: If the articulating arm or swivel points become stiff, a small amount of silicone-based lubricant can be applied to the moving parts.
Dépannage
If you encounter any issues with your Pipishell TV mount, refer to the common problems and solutions below.
- Mount feels wobbly after installation:
- Ensure the mount is installed into a solid structural support (wood stud, concrete, or brick), not just drywall.
- Verify all lag screws securing the wall plate to the wall are fully tightened.
- Check that the TV brackets are securely attached to the TV and properly hooked onto the wall plate.
- Difficulté à régler l'inclinaison ou la rotation :
- For tilt adjustment, ensure the tilt bolts on the TV plate are loosened before attempting to adjust, and re-tighten them afterward.
- For swivel, ensure no cables are snagged or restricting movement.
- If movement is stiff, apply a small amount of silicone lubricant to the pivot points.
- Le téléviseur n'est pas de niveau :
- Check the level of the wall plate during installation. Minor adjustments can often be made by slightly loosening and re-tightening the screws on the TV brackets where they attach to the mount.
- Parties manquantes:
- Refer to the "Package Contents" section and contact Pipishell customer service immediately for replacement parts.
Garantie et assistance
Pipishell stands behind the quality of its products. This TV wall mount is constructed from high-quality steel materials.
- Garantie: We provide a 5-year friendly customer service for this product.
- Service client: If you have any questions, concerns, or require assistance with your product, please feel free to contact us anytime. Refer to the contact information provided in the original product packaging or on the Pipishell official website de support.