AMIR 3-Channel Digital Thermometer Hygrometer (Model JGUS-WA54W) User Manual

1. Produit terminéview

The AMIR 3-Channel Digital Thermometer Hygrometer is designed to monitor indoor and outdoor temperature and humidity across multiple locations. It features a main unit and three remote sensors, providing comprehensive environmental data for various scenarios such as homes, offices, greenhouses, and wine cellars.

Caractéristiques principales :

• 3-Channel Monitoring: Simultaneously displays temperature and humidity from the main unit and three remote sensors.
• Enregistrement max/min : Records and displays the highest and lowest temperature and humidity readings over time.
• Clear HD LCD Screen: Easy-to-read display with humidity level indicators (Wet, Dry, Comfortable).
• Fonction de rétroéclairage : Provides clear visibility in low-light conditions; automatically turns off after 5 seconds.
• Montage polyvalent : Supports both tabletop stand and wall-mounting options for flexible placement.

Contenu du colis :

• 1 x Indoor/Outdoor Thermometer Hygrometer Main Unit
• 3 x Remote Thermo-Hygrometer Transmitters
• 1 x Manuel d'utilisation

2. Guide de configuration

2.1 Installation de la batterie

Ensure proper battery insertion for both the main unit and remote sensors.

• Unité principale : Requires 3 x 1.5V AAA alkaline or lithium batteries (not included). Open the battery compartment on the back of the main unit and insert the batteries, observing polarity.
• Capteurs à distance: Each sensor requires 2 x 1.5V AAA alkaline or lithium batteries (not included). Open the battery compartment on the back of each remote sensor and insert the batteries, observing polarity.

Image : Dos view of the main unit and remote sensor, indicating battery compartments and mounting features.

2.2 Appairage des capteurs

The main unit and remote sensors should automatically pair once batteries are installed. If a sensor does not connect, ensure it is within range and re-insert its batteries to initiate re-pairing.

Image: Simultaneous display of data from three remote sensors, illustrating their use in various environments.

3. Mode d'emploi

3.1 Écran LCD Plusview

The main unit's LCD screen displays indoor temperature and humidity, along with readings from the three remote channels. It also shows temperature and humidity trends, MAX/MIN records, and humidity comfort levels.

Image : détaillée view of the LCD display, highlighting various indicators and readings.

3.2 Humidity Comfort Indicators

• SEC: Humidité < 45%
• CONFORTABLE: 45% ≤ Humidité ≤ 65%
• HUMIDE: Humidité > 65 %

3.3 Boutons et fonctions

• Bouton MIN/MAX : Appuyez pour view the maximum and minimum recorded temperature and humidity values. Press again to cycle through current, maximum, and minimum readings.
• Bouton LUMIÈRE : Active le rétroéclairage pendant 5 secondes.
• Bouton C/F : Permet de basculer entre les unités de température Celsius (°C) et Fahrenheit (°F).
• Bouton CHAÎNE : Cycles through the display of remote sensor channels (1, 2, 3) or displays all channels in rotation.

Image: The 3.6-inch large backlit LCD screen, demonstrating its readability in low light.

4. Placement et montage

The main unit and remote sensors offer flexible placement options.

• Support de table : The main unit has a built-in stand for placement on any flat surface.
• Montage mural: Both the main unit and remote sensors have hang holes for easy wall mounting.

Image: Illustration of wall mount and tabletop stand options for the main unit and remote sensors.

For accurate outdoor temperature readings, ensure remote sensors are mounted in a shaded area, preferably on a north-facing wall, to avoid direct sunlight affecting readings.

5. Entretien

• Nettoyage: Essuyez l'appareil et les capteurs avec un chiffon doux et sec.amp chiffon. N'utilisez pas de nettoyants abrasifs ou de solvants.
• Remplacement de la batterie : Remplacez les piles lorsque le témoin de batterie faible s'affiche. Remplacez toujours toutes les piles d'un appareil en même temps.
• Stockage: Si vous devez entreposer l'appareil pendant une période prolongée, retirez toutes les piles afin d'éviter les fuites.

6. Dépannage

1. Q: Temperature sensor reads too high during the day.
   A: Ensure the thermo-hygrometer remote sensor is mounted in a shaded area, ideally on a north-facing wall, to avoid direct sunlight.
2. Q: Indoor and outdoor temperatures do not agree.
   A: Allow up to one hour for sensors to stabilize due to signal filtering. Indoor and outdoor temperature sensors should agree within 2°C (sensor accuracy is ±1°C). If discrepancies persist, use a known accurate source to calibrate if your model supports it, or re-pair sensors.
3. Q: Display console contrast is weak.
   A: Replace the console batteries with a new set of fresh batteries.
4. Q: Remote sensor not displaying data.
   A: Check if the sensor is within the maximum transmission range (up to 100m/328ft in open air). Ensure there are no significant obstructions (e.g., thick concrete walls). Re-insert batteries in the remote sensor and the main unit to force re-pairing.

7. Spécifications

Image: Dimensions of the main unit and remote sensor.

8. Garantie et assistance

AMIR provides a 45-day money-back guarantee and a 1-year warranty for this product. If you encounter any issues, please contact AMIR customer support for assistance. They guarantee to refund your money or replace the product if problems arise.

9. Scénarios d'utilisation

The AMIR 3-Channel Digital Thermometer Hygrometer is suitable for monitoring environmental conditions in various locations, including:

• Bedrooms and Baby Rooms
• Bureaux et espaces de travail
• Wine Cellars and Warehouses
• Greenhouses and Gardens

Image : Examples of various usage scenarios for the thermometer hygrometer.