1. Introduction
Thank you for choosing Tasmor 32.8ft 5050 RGB LED Strip Lights. This product is designed to provide dynamic and customizable lighting for various indoor and outdoor settings. Featuring 16 color options, music synchronization, and remote control functionality, these LED strips offer versatile illumination. Please read this manual thoroughly before installation and use to ensure proper operation and safety.
2. Contenu du colis
Vérifiez que tous les composants sont présents dans votre colis :
- 2 x 16.4ft (5m) LED Strip Lights (Total 32.8ft / 10m)
- 1 x télécommande
- 1 x Set of Adapters (Power Adapter and IR Receiver)
- 1 x Manuel d'utilisation
Figure 2.1 : Article terminéview. This image displays the complete contents of the Tasmor LED Strip Lights package, including two rolls of 16.4ft LED strips, the remote control, the power adapter, and the IR receiver.
3. Consignes de sécurité
- Assurez-vous que l’alimentation électrique est débranchée avant l’installation ou la maintenance.
- Utilisez uniquement l'adaptateur secteur fourni. L'utilisation d'un adaptateur incompatible peut endommager le produit ou présenter un risque pour la sécurité.
- Do not connect the LED strips directly to mains voltage without the adapter.
- Avoid bending the LED strips sharply, as this can damage the circuit board or LEDs.
- While the LED strips are IP65 waterproof, the power adapter and IR receiver are not. Ensure these components are protected from water exposure, especially during outdoor use.
- The LED strips generate low heat and are safe to touch.
- Tenir hors de portée des enfants.
4. Configuration et installation
Suivez ces étapes pour une installation correcte :
- Préparez la surface : Clean and dry the surface where you intend to install the LED strips. Ensure it is smooth and free of dust or grease for optimal adhesion.
- Mesurer et couper (facultatif) : If necessary, measure the desired length for your installation. The LED strips can be cut at designated marks (usually indicated by a copper pad and scissor icon). Cut only along these marks to avoid damaging the circuit.
- Appliquer la bandelette : Peel off the protective backing from the adhesive tape on the back of the LED strip. Carefully press the strip onto the prepared surface, ensuring firm contact along its entire length. For enhanced adhesion, especially on textured or uneven surfaces, consider using additional mounting clips or double-sided tape.
- Connecter les composants : Connect the LED strips to the IR receiver, and then connect the IR receiver to the power adapter. Ensure all connections are secure. The product supports parallel connection for two strips.
Figure 4.1 : Product Presentation. This image illustrates key features of the LED strip, including its cuttable design, self-adhesive backing, IP65 waterproof rating, and the use of SMD 5050 LED bulbs.
Figure 4.2 : Parallel Connection. This diagram shows how to connect two LED strip rolls to a single IR receiver and power adapter for extended coverage.
- Mise sous tension : Plug the power adapter into a standard electrical outlet. The LED strips should illuminate.
5. Mode d'emploi
Control your LED strip lights using the included remote control.
Figure 5.1 : Remote Control. This image details the layout and functions of the RGB controller, including 16 level brightness adjustment, 4 timing settings, 4 music modes, and 3/7 color jump/fade modes.
5.1 Fonctions de la télécommande
- Marche/Arrêt : Appuyez sur le Pouvoir bouton pour allumer ou éteindre les lumières.
- Sélection de couleur : Choose from 16 static colors using the dedicated color buttons.
- Réglage de la luminosité : Utilisez le V+ et V- buttons to increase or decrease the brightness (16 levels available).
- Modes d'éclairage : Select from 4 dynamic lighting modes (e.g., Flash, Strobe, Fade, Smooth) using the corresponding buttons.
- Modes de musique : Activate one of the 4 music synchronization modes. The lights will change color and intensity based on ambient sound.
- Paramètres de minuterie : Set the lights to automatically turn off after 30, 60, 90, or 120 minutes using the timer buttons.
5.2 Music Mode Operation
The built-in high-sensitivity microphone allows the LED strips to respond to sound, creating a dynamic lighting experience synchronized with music or voice.
- Ensure the IR receiver (which contains the microphone) is not obstructed and is placed in an area where it can pick up sound effectively.
- Select one of the 4 music modes on the remote control.
- The lights will adapt their colors and patterns to the rhythm and melody of the music.
Figure 5.2 : Music Mode. This image illustrates the LED strip lights responding to sound, creating a vibrant and synchronized lighting display in different environments.
5.3 Timing and Energy-Saving
Utilize the timing function to conserve energy and manage your lighting schedule.
- Press the 30min, 60min, 90min, or 120min button on the remote to set an automatic shut-off timer.
- The lights will turn off after the selected duration, promoting energy efficiency.
Figure 5.3 : Timing & Energy-saving. This image demonstrates the energy-efficient nature of the LED lights and the convenience of the timing functions.
6. Entretien
- Nettoyage: Gently wipe the LED strips with a dry, soft cloth to remove dust. Do not use harsh chemicals or abrasive cleaners.
- Relations: Periodically check all connections (strip to receiver, receiver to adapter) to ensure they are secure and free from corrosion.
- Stockage: If storing the LED strips, ensure they are coiled loosely and kept in a dry, cool place away from direct sunlight.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Les lumières ne s'allument pas. | Power adapter not plugged in; loose connections; remote control battery depleted. | Check power connection; ensure all cables are securely connected; replace remote control battery. |
| La télécommande ne fonctionne pas. | IR receiver obstructed; remote control battery depleted; remote too far from receiver. | Ensure clear line of sight to IR receiver; replace battery; operate remote within range. |
| Lights not syncing with music effectively. | Microphone on IR receiver obstructed or too far from sound source; sound volume too low. | Ensure IR receiver is unobstructed and closer to the sound source; increase music volume. |
| LED strip falling off surface. | Surface not clean/dry; adhesive weakened; heavy strip weight on vertical surface. | Clean and dry surface thoroughly before reapplication; use additional mounting clips or stronger double-sided tape. |
| Some LEDs not lighting up. | Damage to the strip (e.g., sharp bend, improper cut). | Inspect the strip for visible damage. If a section is damaged, it may need to be replaced. Ensure cuts are made only at designated marks. |
8. Spécifications
- Marque: Tasmor
- Numéro de modèle : 748323798395
- Type de lumière : Bande lumineuse à LED
- Type de LED : SMD 5050 RVB
- Longueur totale : 32.8ft (10m) - 2 x 16.4ft rolls
- Couleur: RGB (Red, Green, Blue) - Multicolor
- Caractéristiques spéciales : Dimmable, Music Sync, Timing Function
- Source d'alimentation : Électrique avec fil
- Indice d'étanchéité : IP65 (for LED strips only; adapter and receiver are not waterproof)
- Utilisation intérieure/extérieure : Primarily designed for indoor use, but LED strips can be used outdoors with proper protection for non-waterproof components.
- Dimensions du colis : 17.5 x 16.99 x 7.11 cm
- Poids du colis : 621 g
9. Garantie et assistance
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Tasmor webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat.