PHILIPS StellarBright 929001818814

PHILIPS Stellar Bright 16W LED Bulb User Manual

Model: StellarBright 929001818814

1. Introduction

Thank you for choosing the PHILIPS Stellar Bright 16W LED Bulb. This manual provides essential information for the safe and efficient use of your new LED bulbs. These bulbs are designed for indoor use, offering cool daylight illumination with energy-efficient LED technology.

PHILIPS Stellar Bright 16W LED Bulb packaging and product.

The image displays the PHILIPS Stellar Bright 16W LED Bulb alongside its retail packaging. The packaging highlights key features such as 82% energy saving and EyeComfort Technology. The bulb itself is a standard A-shape with a B22 base.

2. Consignes de sécurité

  • Always turn off the power supply before installing, removing, or cleaning the bulb.
  • Do not use if the bulb or its packaging appears damaged.
  • Cette ampoule est conçue pour un usage intérieur uniquement.
  • Ne tentez pas de démonter ou de modifier l'ampoule. Elle ne contient aucune pièce réparable par l'utilisateur.
  • Ensure the bulb is securely screwed into the fixture to prevent accidental detachment.
  • This bulb is non-dimmable. Do not use with dimmer switches, as this may cause damage or malfunction.
  • Vol. de fonctionnementtage is 220-240 volts. Ensure your fixture's voltage correspond à cette exigence.

3. Configuration et installation

3.1 Déballage

Carefully remove the LED bulbs from their packaging. Inspect each bulb for any visible damage before installation.

3.2 étapes d'installation

  1. Couper l'alimentation : Repérez l'interrupteur ou le disjoncteur qui commande le luminaire où l'ampoule sera installée et mettez-le hors tension.
  2. Préparer le match : If replacing an old bulb, allow it to cool completely before carefully unscrewing it from the fixture.
  3. Installer une nouvelle ampoule : Gently screw the PHILIPS Stellar Bright 16W LED Bulb into the B22D base socket. Turn clockwise until it is snug, but do not overtighten.
  4. Restaurer l'alimentation : Turn the power supply back on at the switch or circuit breaker.
PHILIPS Stellar Bright 16W LED Bulb with B22 base.

Un gros plan view of the PHILIPS Stellar Bright 16W LED Bulb, highlighting its standard A-shape and B22D bayonet cap base, ready for installation.

4. Mode d'emploi

Operating the PHILIPS Stellar Bright 16W LED Bulb is straightforward:

  • Marche/Arrêt : Utilisez votre interrupteur mural standard pour allumer ou éteindre la lumière.
  • Non dimmable : This LED bulb is designed to operate at full brightness only and is not compatible with dimmer switches. Using it with a dimmer may lead to flickering, reduced lifespan, or damage to the bulb.
Key features of PHILIPS Stellar Bright 16W LED Bulb.

This graphic illustrates the main benefits of the PHILIPS Stellar Bright 16W LED Bulb, including up to 82% energy saving, 16W power consumption, LED technology, and EyeComfort Technology for reduced eye strain.

5. Entretien

The PHILIPS Stellar Bright 16W LED Bulb requires minimal maintenance:

  • Nettoyage: Ensure the power is off and the bulb is cool before cleaning. Use a soft, dry, lint-free cloth to wipe the bulb. Do not use liquid or abrasive cleaners.
  • Remplacement: When the bulb reaches the end of its operational life, replace it with a new PHILIPS Stellar Bright 16W LED Bulb or an equivalent LED bulb with a B22D base.
PHILIPS Stellar Bright LED Bulb providing eco-friendly lighting in a room.

An image showing the PHILIPS Stellar Bright LED Bulb installed in a wall fixture, illuminating a modern living space with soft, eco-friendly light. The room features a sofa with cushions and a minimalist design.

6. Dépannage

If you encounter issues with your PHILIPS Stellar Bright 16W LED Bulb, refer to the following common problems and solutions:

ProblèmeCause possibleSolution
L'ampoule ne s'allume pasL'appareil n'est pas alimenté
Ampoule mal vissée
Ampoule défectueuse
Fixation défectueuse
Vérifiez l'interrupteur et le disjoncteur.
Assurez-vous que l'ampoule est bien serrée dans la douille.
Replace the bulb with a known working one.
Have the fixture inspected by a qualified electrician.
L'ampoule scintilleUtilisé avec un variateur de lumière
Connexion lâche
Voltagles fluctuations
Remove from dimmer circuit; this bulb is non-dimmable.
Assurez-vous que l’ampoule est bien serrée.
Consultez un électricien si le voltagCes problèmes persistent.
Light output is lowAmpoule incorrectetage for desired brightness
Dust or dirt on bulb/fixture
Ensure the 16W bulb meets your brightness requirements.
Clean the bulb and fixture as per maintenance instructions.
High-quality LED lighting from PHILIPS Stellar Bright bulb illuminating an outdoor entrance.

The PHILIPS Stellar Bright LED Bulb is shown installed in an outdoor fixture, casting bright, high-quality light over the entrance of a building, demonstrating its suitability for various lighting needs.

7. Spécifications

Detailed technical specifications for the PHILIPS Stellar Bright 16W LED Bulb:

FonctionnalitéSpécification
MarquePHILIPS
Nom du modèleStellarBright
Numéro de modèle929001818814_6
Type de lumièreDIRIGÉ
Quoitage16 watts
Culot de l'ampouleB22D
Couleur claireLumière du jour fraîche
Température de couleur6500 Kelvin
Vol d'exploitationtage220-240 Volts
Flux lumineux (maximum)1440 lumens
Efficacité90 lumens per watt, Energy Efficient
Durée de vie de la source lumineuse15,000 heures
Dossier spécialEnergy Efficient, Non Dimmable
Type de matériauPolycarbonate (PC)
Utilisation intérieure et extérieureIntérieur
Nombre d'articles (dans l'emballage)6 Nombre
Item Weight (for pack)480 gramme
PHILIPS Stellar Bright LED Bulb providing comfortable, eye-friendly light for a family.

This image depicts a family, including parents and children, comfortably relaxing in a bedroom illuminated by the PHILIPS Stellar Bright LED Bulb. The lighting is designed to be gentle on the eyes, promoting well-being.

8. Garantie et assistance

8.1 Informations sur la garantie

This PHILIPS Stellar Bright 16W LED Bulb comes with a Garantie de 2 ans on the product from the date of invoice. Please retain your purchase receipt as proof of purchase for warranty claims.

8.2 Manufacturer and Importer Contact

For support, warranty claims, or further inquiries, please contact:

Fabricant: Signify Innovations India Limited (formerly known as Philips Lighting India Limited)
PS ARCADIA CENTRAL, 3A, 3rd floor, 4A, Abanindranath Thakur Sarani (Camac Street), Kolkata – 700 017, India

Importateur: Signify Innovations Inde Limitée
PS Arcadia Central, 3A, 3rd Floor, 4A, Abanindranath Thakur Sarani (Camac Street), Kolkata-700017, West Bengal, India

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.